Panasonic Lcd Monitor Dvd Receiver Cq Vd7001u Operating Instructions

							20
1920
21
CQ-VD7001U
CQ-VD7001U
Before Disc Playback
English
English
Discs that can be Played Back
❒Symbols used on jackets
(Examples of such symbols include)
¡
: Number of subtitle languages
¡
: Number of audio tracks
¡
: Number of angles
The numbers indicate the number of languages,
tracks, angles, etc., recorded on the disc.
Screen size (H:V aspect ratio)
¡
: 4:3 standard size
¡
: Letterbox (apage 46)
¡ 
16:9 wide size
: Playback in letterbox format on a stan-
dard screen (4:3).
: Playback in (pan and scan)
(apage 46) format on a standard
screen (4:3).
Note: ¡The size of the image that is displayed on the screen
depends on the screen mode (“Aspect Ratio” 
a
page
50), and on the screen size for the content on the disc.
❒Region Management InformationThis product is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the
Region number of this product, this product does not
play the disc.
The Region number for this product is “1” and
“ALL”.
PAN & SCAN
PS 16:
9LB 16:
9LB4:
3322
❒Disc Type
1
ALL
12
46
Example:
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACKENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACK
[u] (EJECT)
lights.
Disc Insert¡The mode that supports the disc is selected, and play-
back starts.
When a disc is in the player, change to disc player mode
(CD, MP3, WMA, DVD or VCD (Video CD)) and playback
starts.
Note:
¡Do not insert a disc when the eject button lights
because a disc is already loaded.
¡The power will be turned on automatically when a disc is
loaded.
¡You can play a disc even if the monitor is closed.
¡The sound may be interrupted for a few moments
while the audio format is being identified.¡The audio format is automatically identified. 
(apage 20)
¡When the menu screen appears, see “Chapter/title
Selection” on page 24.
DVDDVDDVD
VCDVCDVCD
CDCDCD
MP3MP3MP3
WMAWMAWMA
CH-C
Disc EjectPress [u]to stop playback and eject the disc.
(Press [u]again to reload the disc.)
Note: 
¡If you leave a disc in the slot for more than 30 seconds
after its ejection, the disc will be automatically reloaded
after loud beep is energized three times.
¡Due to limitations of certain discs, some DVD and
VCD (Video CD) discs may not operate as described
in this manual. Refer to the disc jacket for further
details.
¡This unit does not support DVD and VCD (Video CD)
karaoke functions.
DVDDVDDVD
VCDVCDVCD
CDCDCD
MP3MP3MP3
WMAWMAWMA
CH-C
DVDDVDDVD
VCDVCDVCD
CD
MP3
WMA
CH-C
DVDDVDDVD
VCDVCDVCD
CD
MP3
WMA
CH-C
DVDDVDDVD
VCDVCDVCD
CD
MP3
WMA
CH-C
■ 
When a disc is in the player...
Do not insert a disc when the eject button lights
because a disc is already loaded.
Printed side
Disc Insert/Eject
Caution
¡Do not use irregularly shaped discs.
¡Do not insert foreign object into the disc slot.
Caution
¡When the disc is inserted or ejected, to prevent disc
scratches never exert any downward force on the disc.
TEXT
RecordableReWritable
DISC DVDVCD 
(Video CD)CD CD-R/RW
Mark/logo
Disc Size12 cm {5”}
Video
FormatNTSC
Audio
FormatLPCM,
MPEG1,
MPEG2,
dts, Dolby
DigitalLPCM,
MPEG1LPCM 
(CD-DA),
dtsLPCM 
(CD-DA),
MP3/WMA
Region 
No.1
ALL
❒Notes on DVD-Rs/RWs¡Only video formatted discs are playable.  Discs in the
video recording (VR) format are unplayable.¡Unfinalized discs are unplayable.¡Some discs are unplayable depending on the disc itself,
device, drive and software that are used for disc record-
ing.❒Discs not supportedThe following discs are not played back on this prod-
uct.¡DVD-Audio
¡DVD-ROM
¡DVD-RAM
¡DVD+R
¡DVD+RW
¡SVCD
¡VSD
¡CVD
¡CD-G
¡CD-ROM (except MP3)
¡CD-RW (except MP3 and CD-DA)¡CD-R (except MP3 and CD-DA)¡SACD
¡Photo CD
¡CDV
¡Hybrid SACD (except CD-DA)¡Divx Video Discs¡CD-EXTRA (audio-only playback possible)¡DVDs with a region number other than “1” or “ALL”
¡Playing back a photo CD disc with this unit could
damage the data that is recorded on the disc.
Note: 
¡About CD-Rs and CD-RWs, refer to “Notes on CD-
Rs/RWs”. (apage 58)
¡Some copy-protected music CDs are not playable.
¡Even if you play a dts DVD or a dts CD, analog sound can-
not be reproduced. (Only digital output comes out) 
						

							22
2122
23
CQ-VD7001U
CQ-VD7001U
Disc Player
English
English
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISC
CQ-VD7001U
TEXT
TUNE /
TRACK
ENTER
MODE
[MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
RAND
SCAN
REP
1
2
3
4
5
6
7
80
9
[3] [y] [5]
[s] [d] [MODE]
[]] [[] [}] [{]
[RAND] [REP]
[}] [{] [DISP]
[SCAN]
[0]– [9]
Disc Mode (DVD) SelectionVideo Mode
qTouch “
Mode Button”
. (
apage 17)
wTouch (DVD)on the Mode
Selection Screen.
Press [MODE]
to change to the desired
mode.DVD VTRRADIOCH-CEND
❒Folder/File/Track Selection
qTouch  (folder name) to select
a folder.
,  : scrolls up/down the file list by 1
page.
,  : scrolls up/down the file list by 1
line.
wTouch  (file name) to play.qPress []], [[], [}]or [{]to select a
folder. 
[]][[]: movement among different levels
of trees
[}][{]: movement in the same tree
wPress [ENTER].
DVD VTRRADIOCH-CEND
: Folder
: MP3/WMA file
Note:¡It is not possible to display the whole tree and file list in
a folder.¡The displayed contents on the touch panel vary with cir-
cumstances.DVD
mode display
CD
mode display
MP3/WMA
mode display
……
Touch/Press and hold
VCD (Video CD)
mode display
Mode ButtonPlaying time
Operation Buttons
Audio Mode
OperationsOperations
DVD VTRRADIOCH-CEND
WMAWMAWMA
MP3MP3MP3
CDCDCDVCDVCDVCD
DVDDVDDVDCompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
DVDDVDDVD
Track/file Selection
Fast Forward/
Fast Reverse
Note:¡When playing a DVD, there are cases where it is not possible to return to the
start of a chapter that spans 2 titles. (apage 60)
WMAWMAWMA
MP3MP3MP3
CDCDCDVCDVCDVCD
DVDDVDDVD
VCDVCDVCD
DVDDVDDVD
The speed changes if the button is held down as follows.
Regular speed /1.5 times (DVD) /10 times (DVD) /20 times
Folder Selection
Title Scroll
WMAWMAWMA
MP3MP3MP3
WMAWMAWMA
MP3MP3MP3
CDCDCD
Stop
WMAWMAWMA
MP3MP3MP3
CDCDCDVCDVCDVCD
DVDDVDDVD
To resume playback, touch/press 
/ [5].
Pause
WMAWMAWMA
MP3MP3MP3
CDCDCDVCDVCDVCD
DVDDVDDVD
Slow Playback
VCDVCDVCD
DVDDVDDVD
Repeat Play
WMAWMAWMA
MP3MP3MP3
CDCDCDVCDVCDVCD
DVDDVDDVD
*
*
*
*
Repeat Play within the
Current Folder
WMAWMAWMA
MP3MP3MP3
To resume playback, touch/press again
or touch/press  / [5].
Note:¡Reverse slow playback is not possible.
Scan Play
CDCDCD
Random Play
WMAWMAWMA
MP3MP3MP3
CDCDCD
Random Play within the
Current Folder
WMAWMAWMA
MP3MP3MP3
[d]
[s]
[}]
–
–
– [{][}]
[{]
[SCROLL]
[3]
[y]
[d]
[[] [[]Next track/file
Beginning of the current track/file
Previous track/file (Touch/press twice.) []]
[d]
[s][[]Fast forward
Release to resume playback.
Fast reverse
Release to resume playback.
Next folder
Scrolls the title once Previous folder []]
Touch
desired 
folder
–
[REP]
Basic Operations
¡Touch/press and hold in the pause mode.
Playback is at about 1/3 normal speed.To resume normal playback, 
touch/press 
/ [5].
To cancel, touch/press again.
To cancel, touch/press and hold for more
than 2 seconds again. –
[REP]To cancel, touch/press again. –
[SCAN]To cancel, touch/press again. –
[RAND]To cancel, touch/press and hold again. –
[RAND]
To switch Operation Screen ON, touch the center of touch
panel or press [DISP]on the remote control. (Only for
Video Mode)
Mode ButtonPlaying time
Operation Buttons
Mode ButtonPlaying time
Operation Buttons
* Touch panel symbols will change to indicate these current mode.  ,  {F= FOLDER (folder)}
Title/text scroll
Folder selection
Mode ButtonCurrent track Playing time
Operation Buttons
Title/text scroll
(Example: MP3 mode) 
						

							ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09
PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AV
DISP
RET
DVD1
2
3
4
5
6
7
80
9SUB
ANGLE
AUDIOTITLE
24
2324
25
CQ-VD7001U
CQ-VD7001U
Disc Player
(continued)
English
English
[SUB]
[TITLE][]] [[] [}] [{] 
[ENTER]
[0]– [9] [DISP]
[DVD][RET]
[ANGLE] [AUDIO]
Note:
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡It may not be possible to switch the language unless the unit is at the DVD menu (
aprevious page) or is at the DVD set-
tings. (
apage 46)
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. 
¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
DVDDVDDVD
Subtitle Language
It is possible to change the subtitle language during play if multiple languages
are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
DVDDVDDVD
Audio Language
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.It is possible to switch the audio between stereo sound and monaural sound (L
or R).
DVDDVDDVD
Angle
For DVDs which contain scenes which have been shot simultaneously from a
number of different angles the same scene can be viewed from each of these
different angles during play.
VCDVCDVCD
Stereo & Monaural
: stereo sound
d
: the left channel audio is output on both the left and right
speakers.
d
: the right channel audio is output on both the left and right
speakers. MONO.R
MONO.LSTEREO
[SUB]–
¡Touch/press during playback.
[AUDIO]–
¡Touch/press during playback.
[ANGLE]–
¡Touch/press during playback.
[AUDIO]–
Useful Function
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.
DVD
mode display
Note:
¡For VCD mode, press the numerical key to enter a number directly. 
¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.
¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number
of the title/chapter entered. *2On-Screen Direct Operation (Only for DVD)
Some DVDs allow you to operate the DVD menu by touch-
ing the screen.
In such a case, if your targeted button is located too close
to other buttons, a part of the screen may be enlarged in
order that you can press the button for sure.Note:¡When the current disc is not ready for the on-screen
direct operation, perform operations with the buttons on
the remote control or the unit.
¡The on-screen direct operation of the DVD menu is not
available in the DVD changer mode.
Moving operation buttons (Only for DVD)
When the operation buttons interfere with operations,
press  . The buttons are transferred as shown below.Showing Mode button and Menu button
Press  . The Mode button and Menu button appear.
Mode button
(apage 17)
Menu button
(apage 17)
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
*1
VCDVCDVCDDVDDVDDVD
Showing menu and 
selecting an item
[DVD]
or
[RET]*
1
–
[]] [[]
[}] [{] –*
2–*2–[]] [[]
[}] [{]
d d
[ENTER]d
[ENTER]
[RET]–
–
–
–
qMenu appears.
wSelect the desired item.
eDetermine the setting.
d
d d dd dReturns to the previous display.
qToggles “Chapter number input
mode” and “title number input mode”.
wInput desired number.
ePlayback starts.
Starting Playback 
from a specific 
chapter/title
Note:
¡For retrying selection during number entry, touch/press  /[RET]
.
*1Note on VCD:
For VCD, touch/press
/[RET]
instead of
/[DVD]
.Touch the numerical
key to enter a number
directly
[TITLE]
to [0] to [9]
[ENTER]
DVDDVDDVD
d d
d
d d *
1
or
Chapter/title Selection 
						

							26
2526
27
CQ-VD7001U
CQ-VD7001U
Notes on MP3/WMA
English
English
Root Folder
(Root Directory)
Folder Selection
File Selection
Tree 1 Tree 2 Tree 3 Tree 4 Tree 8
(Max.)2 1
43
q
q ew
r
t
yy5
6
7
1
8
8
–
In the order
–
In the order
What is MP3/WMA?MP3 (MPEG Audio Layer-3) and WMA (Windows Media
TMAudio)
are the compression formats of digital audio. The former is
developed by MPEG (Motion Picture Experts Group), and the
latter is developed by Microsoft Corporation. Using these
compression formats, you can record the contents of about 10
music CDs on a single CD (This figure refers to data recorded on
a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a
sampling frequency of 44.1 kHz).
Note:
¡MP3/WMA encoding and CD writing software programs are
not supplied with this unit.
Points to remember when making MP3/WMA filesCommon¡High bit rate and high sampling frequency are recommended
for high quality sound.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
¡The playback sound quality differs depending on the encoding
circumstances. For details, refer to the instructions of your
own encoding software and writing software.MP3¡It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.WMA¡It is recommended to set the bit rate to “64 kbps or more”
and “fixed”.
¡Do not set the copy protection on the WMA file to enable this
unit to play back.
Display InformationDisplayed items
Displayable characters¡Displayable length of file name/folder name: within 128 char-
acters.
¡Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing software
for details.
¡ASCII character set and special characters in each language
can be displayed.
ASCII character setA to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [  ] ˆ _ ` { | }
~Note:
¡With some software in which MP3/WMA format files have
been encoded, the character information may not be dis-
played properly.
¡Undisplayable characters and symbols will be converted into
an asterisk (
*). 
¡It is recommended that the length of the file name is less than
8 (excluding the file extension).
¡CD-TEXT
Disc title
Track title
¡MP3/WMA
Folder name
File name¡MP3 (ID3 tag)
Album name
Title and artist name
¡WMA (WMA tag)
Album name
Title and artist name
Caution
¡Never assign the “.mp3”, or “.wma” file name
extension to a file that is not in the MP3/WMA
format. This may not only produce noise from
the speaker damage, but also damage your
hearing.
¡You are recommended to minimize the chances of making a
disc that contains both CD-DA files and MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA files,
the songs may not play in the intended order, or some
songs may not play at all.
¡When storing MP3 data and WMA data on the same disc,
use different folders for each data.
¡Do not record files other than MP3/WMA files and unneces-
sary folder on a disc.
¡The name of an MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with the
rules of each file system.
¡The file extension “.mp3” or “.wma” should be assigned to
each file depending on the file format.¡You may encounter trouble in playing MP3/WMA files or dis-
playing the information of MP3/WMA files recorded with cer-
tain writing software or CD recorders.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
Supported file systemsISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note: 
¡Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported.
Recording MP3/WMA files on a CD-media
Folder selection order/file playback orderMaximum number of files/folders¡Maximum number of files: 512
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is included.)
Note:
¡This unit counts the number of folders irrespective of the presence or
absence of an MP3/WMA file. 
¡If the selected folder does not contain any MP3/WMA files, the near-
est MP3/WMA files in the order of playback will be played.
¡Playback order may be different from other MP3/WMA players even if
the same disc is used.
¡“ROOT” appears when displaying the root folder name.
CopyrightIt is prohibited by copyright laws to copy, distribute and deliver
copyrighted materials such as music without the approval of
copyright holder except enjoying yourself personally.No warrantyAbove description complies with our investigations as of
December 2004. It has no warranty for reproducibility and
displayability of MP3/WMA.
Recording MP3/WMA files on a CD-media
32, 44.1, 48 kHz No 64 k – 192 kbps Windows Media Audio Ver. 2, 816, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3)Sampling frequency VBR Bit rate Compression method
Compression formats 
(Recommendation:
“Points to remember when making MP3/WMA files” on the previous page)
Windows Media, and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries. 
						

							28
2728
29
CQ-VD7001U
CQ-VD7001U
Radio
English
English
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACKENTER
MODE
Frequency
Preset memory
Indicates the
intensity of the
radio wave.
Auto presetting
Stereo indicator Band
selection
*1 List 
selection
Tuning
[MODE]
[DISP]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
1
2
3
4
5
6
[]] [[]
[ENTER]
[MODE]
[]] [[] [ENTER][1]– [6]
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.
[ENTER] [ENTER]
Operations
DVD VTRRADIOCH-CEND
Band Selection
List SelectionRefer to the next page.Station
Selection
Seek TuningRadio Mode Selection
qTouch “
Mode Button”
. (
apage 17)
wTouch (RADIO)on the Mode
Selection Screen.
Press [MODE]to change to the Radio
mode.
DVD VTRRADIOCH-CEND
……
Touch/Press and hold
……
Touch/Press and hold [
[][
[]Up
[
]][
]]Down
[
[][
[]Up
[
]][
]]Down
Touch/press and hold for more than 0.5 second then release. Seeking starts.FM 1
FM 2
FM 3
AM
Mode Button (apage 17)
Manual Preset
MemoryUp to 6 stations can be
preset in each band. Preset Station
Calling
to
CH116to
Auto Preset
Memory
6 stations with first to 6th highest in signal
strength of each band will be preset.
[ENTER]
to
CH116to
Preset Swap
qSelect the list and the preset number that contains the channel to be interchanged 
(see “Preset station calling” above).
w Select the list and hold down the preset number that contains the targeted channel for
more than 2 seconds.
The preset channel selected in the step qis
interchanged with the targeted preset chan-
nel selected in the step w(Preset Swap).
Select a band and frequency.¡Touch/press and hold for more than 2 seconds.¡The frequency blinks once, and a receiving station is saved in the memory.
New stations overwrite existing saved channels.¡Touch/press and hold for more than 2 seconds.¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved channels.¡Touch/press and hold for more than 2 seconds.¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved channels.
[ENTER]
In total 18 FM stations are
automatically preset. 
A channel preset is inter-
changeable with another
channel preset.B
–– [ENTER] [ENTER]–
Six stations are automati-
cally preset in each band.A
to
[1]
to
[6]
[ENTER]
[ENTER]
LIST 1
LIST 2
LIST 3
AM
*3
There are 6 stations in each list. You can call up next 6 stations by switching from one list
to another. *3 From the touch panel, you can toggle only Lists 1-3, but not AM. To change to AM,
touch/press /[ENTER]
. 
Tuning
Preset Memory
blinks once
Select a band.Select a band or a list.¡Touch/press desired preset button.
18
stations with first to 18th highest in signal
strength of all FMs will be preset at once.
*2  The displayed contents on the
touch panel vary with circum-
stances. *2  The displayed contents on the
touch panel vary with circum-
stances. *
2*2
Preparation:
Select (all). (
apage 49)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
Preparation:
Select (each). (
apage 49)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
EACH
Preparation:
Select (all). (
apage 49)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
Preparation:
Select (all). (
apage 49)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL
*1Appears when  (all) is selected. (
apage 49)
ee ee / 
ALL
EACH
AUTO PRESET
FM SETUP
RADIO
MENU
ALL 
						

							English
30
2930
31
CQ-VD7001U
CQ-VD7001U
English
VTR
AUX
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACK
MODE
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
qTouch “
Mode Button”
. (
apage 17)
wTouch (VTR)on the Mode Selection
Screen.
Press [MODE]to change to the VTR
mode.
DVD VTRRADIOCH-CEND
Preparation:
¡Connect an optional external device to the unit.VTR Mode SelectionYou can view the images and listen to the sounds from the connected external devices in the VTR mode respectively.Note:
¡You can set up the system so that the VTR mode is not
selected (mode skip). (
apage 48) (VTR set to NAVI INPUT
is not skipped even if  (mode skip) is set to 
(on).)
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡VTR terminal is not used for the Panasonic car navigation
system (available in future). Refer to 
(Navigation Setup) for setting. (
apage 47)
NAVI SETUP
ON
MODE SKIP
[MODE]
[DISP]
[MODE]
qTouch “
Mode Button”
. (
apage 17)
wTouch (AUX)on the Mode Selection
Screen.
Press [MODE]to change to the AUX
mode.
DVD VTRRADIOCH-CEND
Preparation:
¡Connect an optional external device to the unit.AUX Mode SelectionYou can view the images and listen to the sounds from the connected external devices in the AUX mode respectively.Note:
¡You can set up the system so that the AUX mode is not
selected 
(mode skip)
. (
apage 48)
Mode Button (apage 17)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACK
MODE
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
[MODE]
[MODE]
Mode Button (apage 17)
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control. 
						

							3233
CQ-VD7001U
English
3132
CQ-VD7001UCD Changer Control
DVD Changer Control
English
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACKENTER
MODE
Total track number Disc number
Total time
Disc selection Current track
Track selection
Mode Button (apage 17)
Random Play
Scan Play
Repeat Play[]][[]
[}] [{][]][[]
[}] [{]
[MODE][RAND][REP]
[RAND]
[SCAN]
[REP] [DVD]
[RET]
[TITLE]
[AUDIO]
[ANGLE]
[SUB] [MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
RAND
SCAN
REP
[d]
[s]
To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.CD Changer Mode Selection
qTouch “
Mode Button”
. (
apage 17)
wTouch (CH-C) on the Mode Selection
Screen.
Press [MODE]to change to the CD
Changer mode.
DVD VTRRADIOCH-CEND
¡CD changer functions are designed for optional
Panasonic CD changer unit. (CX-DP880)Preparation:
¡Connect the CD changer, and load a magazine (discs).
[DISP]
[SCAN][}] [{]
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACKENTER
MODE
Disc/folder
selection
Operation
Buttons
Mode Button (apage 17)To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.DVD Changer Mode Selection
qTouch “
Mode Button”
. (
apage 17)
wTouch (CH-C)on the Mode Selection
Screen.
Press [MODE]to change to the DVD
Changer mode.
DVD VTRRADIOCH-CEND
……
Touch/Press and hold
[MODE]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
RET
DVD
RAND
SCAN
REP
1
2
3
4
5
6
7
80
9SUB
ANGLE
AUDIOTITLE
[3] [y] [5]
[s] [d]
[}] [{]
[]][[]
[}] [{]
[0] – [9][DISP] [MODE]
* Touch panel symbols will change to indicate these current mode. 
,  ,  {D= DISC (disc)}
……
Touch/Press and hold
¡DVD changer functions are designed for optional
Panasonic DVD changer unit. (CX-DH801U)
Preparation:
¡Connect the DVD changer, and load a magazine (discs).
Note:¡Be sure to connect RCA cord of the Panasonic DVD
Changer to CH/AUX-IN. Otherwise the changer cannot be
controlled through this unit.  (aInstallation
Instructions)
¡Refer to the operating instructions and installation
instructions of CX-DH801U as well.
OperationsOperations
DVD VTRRADIOCH-CEND
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVDCompatibleDiscsCompatible
DiscsCompatible
DiscsDisques 
compatiblesCompatible
Discs
Compatible
Discs
Compatible
DiscsDiscos 
compatiblesCompatible
Discs
DVDDVDDVD
Track/file Selection
Fast Forward/
Fast Reverse
Note:
¡When playing a DVD, there are cases where it is not possible to return to the
start of a chapter that spans 2 titles. (apage 60)
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
The speed changes if the button is held down as follows.
Regular speed / 2 times / 5 times / 10 times / 30 times
Folder Selection
MP3MP3MP3
Stop
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
To resume playback, touch/press
/ [5].
Pause
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
To resume playback, touch/press
/ [5].
[d]
[s]
[}]
– – – – –
–
– [{]
[3]
[y]Next track/file
Beginning of the current track/file
Previous track/file (Touch/press twice.)
[d]
[s]Fast forward
Release to resume playback.
Fast reverse
Release to resume playback.
Next folder
Previous folder
Basic Operations
Operations
Track Selection
DVD VTRRADIOCH-CEND
Disc Selection
[}
]
[
{
][
}
]
[
{
]Next disc
Previous disc
Fast Forward/
Fast ReverseRepeat PlayRepeat Play within the
current DiscScan PlayRandom Play
Random Play within the
Current Disc
[d][[]
[s][]]Fast reverse
Release to resume playback.
Fast forward
Release to resume playback.
[REP]
–
–
–
–
– [SCAN]
[RAND][RAND][REP]
To cancel, touch/press and hold for more than 2 sec-
onds again. To cancel, touch/press again. To cancel, touch/press and hold for more than 2 sec-
onds again. To cancel, touch/press again.
To cancel, touch/press again.
Disc Scan Play
– [SCAN]
The first 10 seconds of the all the discs is played.
To cancel, touch/press and hold for more than 2 sec-
onds again.
Basic Operations
*
*
*
[d]
[s][[]
[]]Next track
Beginning of the current track
Previous track (Touch/press twice.)
[]][[]
[}] [{] 
						

							34
333435
CQ-VD7001U
CQ-VD7001U
DVD Changer Control 
(continued)
English
English
Note:
¡If no operation is performed for 10 seconds or  /[DISP]
is touched/pressed, the operation buttons disappear.
¡It may not be possible to switch the language unless the unit is at the DVD menu (
aprevious page) or is at the DVD set-
tings. (
apage 46)
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. 
¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
DVDDVDDVD
Subtitle Language
It is possible to change the subtitle language during play if multiple languages
are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
DVDDVDDVD
Audio Language
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.It is possible to switch the audio between stereo sound and monaural sound (L
or R).
DVDDVDDVD
Angle
For DVDs which contain scenes which have been shot simultaneously from a
number of different angles the same scene can be viewed from each of these
different angles during play.
VCDVCDVCD
Stereo & Monaural
: stereo sound
d
: the left channel audio is output on both the left and right
speakers.
d
: the right channel audio is output on both the left and right
speakers. MONO.R
MONO.LSTEREO
[SUB]
– –
¡Press during playback.
[AUDIO]
– –¡Press during playback.
[ANGLE]
– –¡Press during playback.
[AUDIO]
– –
Useful FunctionNote:
¡For VCD mode, press the numerical key to enter a number directly. 
¡The on-screen direct operation of the DVD menu is not available in the DVD changer mode. (
a
page 24)
¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.
¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number
of the title/chapter entered. 
……
Touch/Press and hold
*
VCDVCDVCDDVDDVDDVD
Showing menu and 
selecting an item
[DVD]
–
–
–[]] [[]
[}] [{]
[]] [[][]] [[]
[}] [{]
d
[ENTER]d
[ENTER]
[RET]
–
–
–
–
–qMenu appears.
wSelect the desired item.
eDetermine the setting.
d
d d dd dReturns to the previous display.
qSelect input mode.
wToggles “Chapter number input
mode” and “title number input mode”.
eInput desired number.
rPlayback starts.
Starting Playback 
from a specific 
chapter/title
[RET]
–Returns to the previous display.
*Note on VCD:
For VCD, press [RET]
instead of [DVD]
.
[TITLE]
[0] to [9]
[ENTER]
DVDDVDDVD
d
d d
Chapter/title/track SelectionSlow Playback
VCDVCDVCD
DVDDVDDVD
Repeat Play
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
MP3MP3MP3
CDCDCD
VCDVCDVCD
DVDDVDDVD
Repeat Play within the
Current Disc
CDCDCD
VCDVCDVCD
Note:
¡Reverse slow playback is not possible.
Scan Play
CDCDCD
Random Play
Random Play within the
Current Folder
MP3MP3MP3
–
[d]–
[REP]
Basic Operations  (continued)
¡Touch/press and hold in the pause
mode.
Playback is at about 1/4 normal speed.
To resume normal playback,
touch/press / [5].To cancel, touch/press again.
To cancel, touch/press and hold for more
than 2 seconds again. –
[REP]
To cancel, touch/press again. –
[SCAN]
To cancel, touch/press again. – –
–
Repeat Play within the
Current Folder
MP3MP3MP3
To cancel, touch/press and hold for more
than 2 seconds again. –
[REP] –
–
CDCDCD
To cancel, touch/press again. –
[RAND] –
–[RAND]
[}]
[
{
]–
–Next disc
Previous disc
Disc Selection
––
–
–d
d d dqActivates input mode.
wInput desired number.
ePlayback starts.
Direct Track Selection
[TITLE][0] to [9]
[ENTER]
MP3MP3MP3
CDCDCD
VCDVCDVCD
Chapter/title/track Selection  (continued)
[RET]
–Returns to the previous display. 
						

							English
3637
CQ-VD7001U
English
3536
CQ-VD7001UXM Satellite Radio ControlBand selection
Indicates the
satellite tuner is
ready.Channel information
(text display) Channel
*Category selection
Preset memory
Indicates the intensity of
the radio wave.
Category Indicator
[]] [[] [}][{][ENTER]
[MODE] Channel
selection
Mode Button (apage 17)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001U
TILT
TEXTTUNE /
TRACKENTER
MODE
[MODE] [TITLE]
[DISP]
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
DISP
1
2
3
4
5
6
7
80
9
TITLE
[]][[]
[}][{]
[ENTER]
[0]– [9]
[
}]
[
{]
[DISP] –[
}]
[
{]
up
down
Category
Selection
Switching the Text
DisplayPreset Memory
Preset Channel
CallingUp to 6 channels are
saved in the preset memo-
ry.The channel blinks once, and a receiving station
is saved in the memory.Preset Memory
to
[1]
to
[6]
to
[1]
to
[6]
–
–
Select a band.
Touch/press desired preset button.Touch/press once to display the category name, then touch/press again. Seeking will
start.
[ENTER]
[TITLE]
d
[0] to[9]
d
[ENTER]
––[ENTER]
Tuning
Operations
DVD VTRRADIOCH-CEND
Band Selection
Channel
Selection
Direct Channel
Selection
[
[][
[]
up
[
]][
]]
down
XM 1
XM 2
Select a band and channel.
Touch/press and hold for more than 2 seconds.
XM 3
……
Touch/Press and hold
Useful Function
Text display switches between 2 types as
shown.
ch name (channel name)
name 
title
category
ch name (channel name)
Note:
¡Because preset memory setting is performed
with service IDs in each channel, a channel
may switch to another that has been stored
under the same service ID when calling up a
preset channel. However, broadcasting con-
tents are the same as what the stored channel
provides. Note:
¡The direct channel selection is canceled under
following circumstances.
¡A nonexistent channel is selected.
¡
[TITLE]
is pressed and no operation is
performed for 8 seconds.
*The displayed contents on the touch panel vary
with circumstances.
Press [MODE]to change to the XM
Radio mode. To switch Operation Screen ON, touch the center of touch panel or press [DISP]on the remote control.
XM Satellite Radio Mode Selection
qTouch “
Mode Button”
. (
apage 17)
wTouch (XM)on the Mode Selection
Screen.
DVD VTRRADIOCH-CEND
Preparation:
¡Connect the optional XM Satellite Radio (XMD1000) with optional Digital Adapter (XMDPAN100).Getting StartedIt is required to sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID, sign
up on the XM’s website or by calling them.
qCheck of XM Satellite Radio ID
¡Write down the ID indicated on the lower right of your
XM Satellite Radio (XMD1000).
¡Check the ID shown by tuning your XM Radio to chan-
nel 0. (Refer to “Channel Selection” on this page.)wActivate the XM Satellite Radio. Select either of the
below to sign up.
¡Web site: http://www.xmradio.com/activation
¡Phone number: 1-800-852-9696XM Satellite Radio You can connect the optional XM receiver (XMD1000) with
optional Digital Adapter (XMDPAN100). For details, refer
to the operating instructions for the XM receiver.
¡Toll free number
XM Tuner P/N: XMD1000 
Call 1-800-XM-RADIO(96-72346)
Extension cord P/N: XMDPAN100 
Call 1-800-942-TERK(8375)
About XM The direct satellite-to-receiver broadcasting technology is
used to provide listeners with crystal clear sound smooth-
ly from coast to coast. XM is over 130 channels of sheer
variety: digital-quality music, news, sports, comedy, traffic
& weather, talk, children’s programs, and more.
The XM name and related logos are trademarks of XM
Satellite Radio Inc.
XM RADIO ID
XMD 1000
L/C1144XXXXXX
XM RADIO ID : XXXXXXXX
Preparation:
Select (on). (
apage 49)
eee / 
OFF
ON
XM CATEGORY
RADIO
MENU
ON
* Appears when  (on) is selected. (
apage 49)
eee / 
OFF
ON
XM CATEGORY
RADIO
MENU
ON 
						

							English
3839
CQ-VD7001U
English
3738
CQ-VD7001USettings
❏MENU Operation
Note
:
¡The display returns to the previous status if there is no operation for more than 60 seconds after changing to the
setting menu. (Example: DVD mode)
Touch  in Operation Screen.
: Press [MENU]
.Touch desired setting.
qw
: Press 
[
}]
, [
{]
, [
]]
or [
[]
to
select, then [ENTER]
to deter-
mine.
(Example: setting screen of DISPLAY UNIT apage 40)
Determines the setting and goes back to the pre-
vious menu out of the menu.
e
: Press [ENTER]
then, press
[MENU]
.
Determines the setting and gets out of the menu
: Press [ENTER]
then, press
[MODE]
.
Preparation: 
To display menu in French, Execute  (Language setting). (
apage 41) 
MENU DISPLAY
ENTER
PWR MODE MENU NAVI
ASPECT SCROLL
P-MODE
NAVIGATION POWER
STOPDVD MENU TITLE/CHAPTERST / MONORANDOM RETURN
DISP
RET DVD
RAND TITLE
AUDIOANGLE
SCAN REP
SUBSCRL MUTEVOL
12 3
45 6
7
A8
09
PAUSE
TRACK / SEARCHPLAY
SUBTITLE
VOLDISC/FOLDER DISC/FOLDER
CAR AVMODE
MENU
[MENU](Goes back to the previous menu)
[}] [{] []] [[]
(Select/adjust)
[ENTER] (Determine) [MODE] 
(Exit from the
menu)
[MENU](Goes back to the pre-
vious menu)
[MODE] (Exit from the menu) (Example: DVD mode)[}] [{] []] [[]
(Select/adjust)
[ENTER]
(Determine)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOL
P·MODE
DISC
OPEN / CLOSE
CQ-VD7001U
TILT
TEXT
TUNE /
TRACK
ENTER
MODE MENU
Menu ButtonTouch for“Menu
Screen”