Panasonic Kx-tvs50, Kx-tvs80 Voice Processing System Installation Manual

4.3 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
81
ports. 
•
KX-TVS50/80 (2 ports): assign 1 jack 
Fro m  t h e  SYS-PGM NO ?
 
screen:
a)Enter 
[117].
b)Press the 
NEXT button (SP-PHONE).
Screen output: M: # #
c)Enter the jack number of the port you will use for the Voice Mail (2 - 8). 
d)Press STORE.
e)Press END (HOLD) when finished.
4.Skip this step unless setting flexible numbering....

4.3 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308 
82INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
5.Unplug or power down the KX-TD308.
6.Connect the jack assigned in Step 3 to the KX-TVS50/80.
7.Connect your laptop computer to the KX-TVS50/80 and start your communication software 
(i.e., HyperTerminal, Procomm Plus, Smartcom...). 
Communication Parameters: 9600, 8 Bit, None, 1
8.Set the DIP switch on the KX-TVS50/80 to position 5.
Only...

4.3 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
83
Screen output:
This message is shown when the digital (DPT) connection between the VPS and 
telephone system cannot be established. This is normal. This message appears because 
the PBX type for the VPS is not a KX-TD series system. Since the default PBX type is 
set to the KX-TA series at the factory, this message will always appear. To...

4.3 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308 
84INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
Set the DIP switch to position 0 after initialization is complete. TEST: Press the INTERCOM button and then [295]. If the VPS 
answers, you have a DPT connection.
The required programming is complete and the VPS and KX-TD308 should be able to 
communicate through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMIZING...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
85
4.4 COMMON DIGITAL INTEGRATION 
FEATURES AND SETUP PROCEDURES
The following features can be used on any KX-T proprietary telephone. (7000 series analog; 
7200/7400 series digital) KX-T7000 series is used with the KX-TA624. The KX-T7200/KX-
T7400 series are used with the KX-TD series.
4.4.1 Live Call Screening (LCS) Programming
LCS notifies subscribers of incoming...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
86INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
1.Enter Station Programming:
 For KX-TA624
With the phone on-hook, 
Set the 
MEMORY switch to 
PROGRAM.
(Display changes to PITS-PGM Mode.)
For KX-TD series
 
Enter PITS programming:
a. With the phone on-hook, 
Press the 
PROGRAM button.
b. Dial [
99]. (Display changes to PT-PGM Mode.) 
2.Press the code for the mode you want this phone to have.
Hands-Free = #11(for...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
87
3.Press [92].
Screen output: LCS
4.Press STORE.
5.Exit the program mode:
For KX-TA624
Set the 
MEMORY switch to 
SET.
For KX-TD series
Press the 
PROGRAM button or lift the handset. 
6.Repeat these steps for each telephone.
4.4.5 Live Call Screening Cancel Button Assignment
This button assignment allows you to assign a Flexible (CO, DSS) button as a Live Call...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
88INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
4.4.6 Live Call Screening Password Assignment
To allow the Live Call Screening feature to work at an extension, the extension must have the 
LCS button lit. To light this button on the phone, press the LCS button, then enter the password. 
This password prevents others from activating the LCS feature and listening to the messages 
as they are being left. (It is not...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
89
For KX-TD series
a. With the phone on-hook, 
Press the 
PROGRAM button.
b. Dial 
[99]. (Display changes to PT-PGM Mode.)
2.Press [#2] (for KX-TA624) or 
[03] (for KX-TD series).
Screen output: Ext NO?
3.Press the extension number. Or press [ ] key to remove all passwords (for KX-TD series 
only).
4.Press STORE.
5.Exit the program mode:
For KX-TA624
Set the 
MEMORY...

4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
90INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
For KX-TD series
Press the 
PROGRAM button or lift the handset. 
7.Repeat these steps for each telephone.
4.4.11 Two-Way Transfer into Mailbox
This feature allows an extension users to record a conversation into another persons mailbox 
by pressing the Two-Way Transfer (TWT) button followed by the mailbox number. This is 
commonly used by a person who is taking a...