Panasonic Kx-tvs50, Kx-tvs80 Voice Processing System Installation Manual

3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
61
7.Choose 
Miscellaneous from the 
System Menu.
System Menu
8.Choose the 
Call Hunting extension group. Set the last extension group to [
AA] for 
Automated Attendant.
Miscellaneous
9.Select 
SAVE(F7). Return to the 
System Data Programming Menu.
                                           
 (A)ccount Codes                                   
 Caller (I)D...

3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
62INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
10. Choose 
CO-Line (ALT-L) from the 
System Data Programming Main Menu.
System Data Programming Main Menu
11. Choose 
Settings (2) in the 
Sub Menu, and program all lines DIL to the first extension of the 
Voice Mail hunt group.
Sub Menu
CO Line Setting
AuxPorts (ALT-U)
Manager (ALT-M)
System (ALT-Y)
CO-Line (ALT-L)
Station (ALT-S)
TRS(ALT-T)
ARS(ALT-A)
  Settings (1)...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 63
Section 4
INTEGRATING THE VPS WITH THE
PANASONIC KX-TA ANALOG PBX AND KX-
TD DIGITAL PBX 

4.1 GUIDELINES FOR DIGITAL INTEGRATION
64INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
4.1 GUIDELINES FOR DIGITAL INTEGRATION
4.1.1 Why Digital Integration is Important
The KX-TVS50/80 works well with most PBXs because its connections are made through a 
standard single line (tip/ring) telephone interface. However, the communication between the 
PBX and VPS is best when Digital Integration is used; the KX-TVS50/80 is already set up to 
communicate through Digital...

4.1 GUIDELINES FOR DIGITAL INTEGRATION
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
65
Caller ID Call Routing*1The VPS automatically sends calls from pre-assigned 
Caller ID numbers to the desired extension, mailbox 
or Custom Service.
Personal Greeting for Caller 
ID*
1
Each subscriber can record up to 4 personal greeting 
messages for special callers.
*
1Caller ID note: When an incoming outside call reaches the VPS via the PBX, 
the VPS will wait about 2 rings before...

4.2 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624
66INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
4.2 CONNECTING THE KX-TVS50/80 WITH THE 
PANASONIC KX-TA624
4.2.1 KX-TA624 Software Verification and Programming for Digital 
Integration via the Managers Extension
It is important that the KX-TA624 has the proper software level to allow Digital Integration 
with the VPS. Follow the procedures below to confirm the software level, then complete the 
required...

4.2 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
67
Fro m  t h e SYS-PGM NO ?
screen: 
a)Enter 
[130] (for VPS1) or 
[131] (for VPS2).
b)Press the 
NEXT button (SP-PHONE).
Screen output: Disable
c)Press the 
SELECT button (AUTO-ANSWER).
Screen output: Port 
7 or Port 15
d)To assign 2 jacks, 
Press the 
SELECT button (AUTO-ANSWER) again.
Screen output: Port 
7& 
8 or Port 15& 16
To assign 1 jack, skip this step....

4.2 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624
68INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
a)If the KX-TVS50/80 is answering all incoming calls:
CO Mode—Use System Programs [414](Day Mode), [415](Night Mode), 
[416](Lunch Mode) to set this parameter. Program all lines DIL to the first extension 
of the Voice Mail hunt group. The KX-TA624 will allow incoming CO calls to hunt 
only if the CO lines are DIL to the first port of the hunt group. Lines programmed...

4.2 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
69
CAUTION
Setting the DIP switch to position 5 will default the Voice Processing System, resulting in a 
loss of all user programming, and voice messages (except User1 and User2 prompts).
10. Plug in and power up the KX-TVS50/80 and wait approximately 2.5 min while the system 
initializes. 
System Administration Start-Up Sequence 
Before starting the VPS, make sure...

4.2 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624
70INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 
Screen output:
This message is shown when the digital (APT) connection between the VPS and 
telephone system cannot be established.
Possible causes of the message: APT Interface Connection is not Established
11.Start up completed.
a)The Power Indicator light stops blinking when the start-up has been successful. (The 
delay varies according to the systems condition.)...