Panasonic Kx Tg2770 Operating Instructions Manual

Press [1]. 
Press [2].
61
Remote Operation from a Touch Tone Phone
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Press [2].
Press [1]. 
Press [1]. 
Press [2].
Press [2].
Press [1]. 
Voice Menu
The shaded parts are voice prompts.
•3 seconds after playback, the voice menu will start again from the beginning.
•The unit will announce the remaining recording time after playback if it is less than 
5 minutes.
•If you hear “Memory full” after playback, erase unnecessary messages (p. 62)....

Remote Operation from a Touch Tone Phone
62
Direct Remote Operation
Once you have accessed one of the mailboxes (p. 59), you can also control your 
unit by direct commands instead of using the voice menu. To end the remote 
operation, hang up anytime.
Direct commands
Turning on the Answering System
Call your unit and wait for 15 rings.
•The unit will answer and the greeting will be played.
•The Answering System will turn on. Hang up or enter the remote code for other 
options.
•When turning on the...

63For assistance, please call: 1-800-211-PANA(7262)
Useful Information
Belt ClipHandset
You can hang the cordless handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip  
Optional Headset
Plugging the optional headset into the cordless handset allows for hands-free 
phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, 
KX-TCA88, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an...

64
Wall Mounting
This unit can be mounted on a wall phone plate.
1Pull down the handset hook until it locks, so 
the tab holds the handset. 
2Press the tabs in the direction of the arrows ( ), then remove 
the wall mounting adaptor ( ).
3Connect the AC adaptor. Tuck the telephone line cord inside 
the wall mounting adaptor, then push it in the direction of the 
arrows ( ) and ( ). 
•The word “UP WALL” should face upward.
Wall Template for the Charger unit
1
2
2
11
12
To Power 
Outlet
11
22
2.45 cm(15⁄16) 

65
Wall Mounting
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
4Connect the telephone line cord. 
Mount the base unit, then slide 
down. 
•Raise the antennas.
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws 
using the wall template (p. 64). Mount the charger ( ). Slide it down ( ), 
then slide down to the right ( ) until it is secured.
To temporarily set the handset down 
during a conversation, place it as shown 
here.
12
3
$
#
%
To Power...

66
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the cordless handset or if you want to use the cordless 
handset with a different base unit of the same model, it is necessary to cancel the 
registration from the current base unit.
Only one cordless handset can be canceled at a time near the base unit.
Make sure the cordless handset and the base unit are not being used.
•“[-]” is shown on the top right of the display. 
•After canceling...

67
Canceling Registration/Re-registration
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Re-registering the Handset
If you want to re-register the cordless handset to the base unit or a different base 
unit of the same model, you need to register it to that base unit. The cordless 
handset will be given a new extension number of that base unit. Only one cordless 
handset can be registered at a time near the base unit. 
Make sure the base unit and the other cordless handsets are not...

68
If the Following Appear on Your Display...
If the unit detects a problem, one of the following messages will be displayed on the 
base unit or the cordless handset. Error beeps or a busy tone will sound.
Display messageCause & Remedy
Recharge battery(cordless handset only)•The battery needs to be charged. Recharge the 
battery (p. 12).
Charge for 15HRS(cordless handset only)•The battery has been discharged. The cordless 
handset will not work. Charge the battery fully (p. 12).
No link to base.
Walk...

69
If the Following Appear on Your Display...
Useful Information
For assistance, please call: 1-800-211-PANA(7262) System is busy.
Please try again
later.•If radio communication between the cordless 
handset and the base unit is partially impaired, this 
display will be shown.
•If more than one unit is in use, such as conducting 
external/intercom calls or listening to messages, you 
may not be able to use another unit. Try again later.
•If you try to program with the base unit or cordless 
handset and...

If the Following Appear on Your Display...
70
Not found
2Way radio mode
(cordless handset only)•When you tried to call another cordless handset in 
2-Way Radio mode;
– the cordless handset is too far from your cordless 
handset. Walk closer to the cordless handset.
– 2-Way Radio mode on the cordless handset is off 
(p. 46).
– The cordless handset you called is talking with 
another cordless handset in 2-Way Radio mode.
Invalid.
Please register 
to the base unit
(cordless handset only)•The cordless...