Panasonic Kx Tg2770 Operating Instructions Manual

11
Installation
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Installing the Battery in the Cordless Handset
Insert the battery ( ), and press it down until it snaps into the compartment ( ). 
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as 
indicated by the arrow. Replace the old battery with a 
new one (p. 12). Close the cover and charge the 
cordless handset for about 15 hours.
Battery Charge
Place the cordless handset on the 
charger and...

Installation
12
Recharge
Recharge the battery when:
—“Recharge battery” is displayed on the cordless 
handset,
—“ ” flashes, or
—the cordless handset beeps intermittently while it is in use.
•If you DO NOT recharge the battery for more than 15 minutes, the display will 
continually indicate “Recharge battery” and/or “” will flash when the 
cordless handset is lifted off the charger.
•If the battery has been discharged, the cordless handset will display “Charge 
for 15HRS” and “” when you place the cordless...

Preparation
13For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
Programming Guidelines
The base unit and the cordless handset have programmable functions. They are 
selected from the function menu on the display (p. 14, 15).
How to select a function item from the menu
Make sure the base unit and the cordless handset are not being used. 
The cordless handset must be operated near the base unit and off the charger.
1Base unit: Press [FUNCTION/EDIT].
Cordless handset: Press...

Programmable Settings
14
Useful information
•“
–––––––––––––––” indicates the beginning or end of the function menu.
•You can go back to the previous display by pressing [] except when entering 
characters or numbers. To return to the main menu from the sub-menu, press [].
•After programming is complete, the display will return to the main menu or the 
sub-
menu depending on which menu the selected item is located. (See the menu 
tables on pages 14 and 15.)
•To exit the programming mode: 
For the base...

15
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Cordless handset
*The items with “*” in the menu table can be programmed with either the base 
unit or the cordless handset. You do not need to program these items on both 
the base unit and the cordless handset.
Ringer volumep. 18
Ringer tonep. 18
Incoming callp. 49
Copy 1 itemp. 37
Copy all itemsp. 38
LCD contrastp. 19
Auto talkp. 19
Room monitorp. 44
Caller ID editp. 31
Set tel lineSet dial modep. 17
Set flash...

Programmable Settings
16
Date and Time (use either   or  )
Set the clock with either the base unit or the cordless handset. You do not need to 
program both on the base unit and the cordless handset.
•When entering the time, you cannot enter numbers greater than 12. Do not use 
military time. (To set 13:00 hours, enter “0100”, and select “PM”
.)
:
 Press [CONF/FUNCTION], and follow steps 2 to 4 above, using 
the cordless handset. Press the soft key ( ), then press [OFF].
1Press [FUNCTION/EDIT].
2Scroll...

17
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Dialing Mode (use either   or  )
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set 
dialing mode to “Pulse”. The factory preset is “Tone”.
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using 
the cordless handset. Press the soft key ( ), then press [OFF].
Line Mode (use either   or  )
The line mode is preset at the factory to “B”. Generally leave the line mode to  “B”. If...

Programmable Settings
18
Ringer Volume
You can select the ringer volume to HIGH, MEDIUM, LOW or OFF on the base unit 
and the cordless handset separately. The factory preset is HIGH. If set to OFF, the 
unit will not ring for external calls and will ring at the LOW level for intercom calls. 
•If set to OFF, the base unit displays “Ringer off” while not in use and no new calls 
are in the Caller List. The cordless handset displays “Ringer off” while not in use.
•You can also select the r inger volume...

19
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Auto Talk  Feature
The Auto Talk feature allows you to answer a call by lifting the cordless handset off 
the charger without pressing [] or []. To use this feature, turn the feature ON. 
The factory preset is OFF.
•In order to view Caller ID information after you lift up the cordless handset to 
answer a call, leave the Auto Talk feature OFF.
LCD Contrast
You can select the LCD contrast (6 levels) on the base unit and...

20
Preparing the Answering System
Greeting Message
You can record a personal greeting message of up to 2 minutes. If you do not 
record your own message, one of two pre-recorded greetings will be played for 
callers (p. 21).
To record a greeting message
To adjust the speaker volume, press 
[] or [].
•9 levels (0–8) are available while using the Answering System.
•The number of steps shown on the display indicates the volume level.
The total recording time of all messages (greeting, incoming and memo) is...