Panasonic Kx Td500 User Manual

Station Programming
User Manual81
– [EXT No.1] Group No.
– [EXT No.2] DN
– [EXT No.2] Group No.
Voice Mail (VM) Transfer Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter non-existent extension or a floating directory number.*1
Please refer to Floating Station of Section 1.3 System Features in...

Station Programming
82User Manual
2.2.4 Full One-Touch Dialing Assignment
Allows you to enable or disable the Full One-Touch Dialing function. The Hands-free 
Operation mode is activated by pressing a One-Touch Dialing button, DSS button, REDIAL 
button or SAVE button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is On.
PT
Dial 3.Press STORE.
or
Dial 1 or 2.
1 : to select the off mode
2 :...

Station Programming
User Manual83
2.2.5 Handset / Headset Selection
Allows you to select the handset mode or headset mode.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Handset.
PT
Dial 9.Press STORE.
or
Dial 1 or 2.
1 : to select Handset mode
2 : to select Headset mode
129
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming mode. The display shows the...

Station Programming
84User Manual
2.2.6 Initial Display Selection
Allows you to select the initial display, Caller ID, CO line name or DID name which is shown 
on the display when a call is received.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Caller ID mode.
PT
Dial 81.Press STORE.
or
Dial 1, 2 or 3.
1 : for the Caller ID
2 : for the CO line name
3 : for the DID name
1182
AUTO DIAL...

Station Programming
User Manual85
2.2.7 Intercom Alert Assignment
Allows you to select the alert mode (tone / voice) when receiving an intercom (extension) call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Ring-Calling (Tone Call).
PT
Dial 4.Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
142
AUTO DIAL
STORE
The STORE...

Station Programming
86User Manual
2.2.8 Live Call Screening (LCS) Mode Set*1
Assigns whether the recording message is monitored through the built-in speaker (Hands-free 
mode) or an alert tone is sent (Private mode) while incoming callers are leaving a message in 
the called extensions mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Hands-free mode.
*1Available when the Digital...

Station Programming
User Manual87
2.2.9 PDN/SDN Button Delayed Ringing Assignment
Allows you to assign a delayed ringing function on the PDN/SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
If more than one PDN button is assigned on a PT, Delayed Ringing can be set to the first 
PDN button (assigned to the CO 01) only. This Delayed Ringing setting applies to all PDN 
buttons on the same PT....

Station Programming
88User Manual
2.2.10 Phantom Button Ringing On/Off Assignment
Allows you to assign a ringing On/Off function on a Phantom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].

Ring On
PT
Press Phantom you
wish to turn On/Off the 
ringing.Dial 1or 2.
-1: Ring Off
-2: Ring Onor
Press STORE. Press the same Phantom
again.
12
AUTO DIAL
(Phantom)
STORE
The STORE indicator lights.
The display shows...

Station Programming
User Manual89
2.2.11 Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming calls from the following three line 
preferences:
a)No Line Preference
b)Ringing Line Preference (— default)
c)Prime Line Preference
Follow the corresponding programming procedure according to your selection. 

Station Programming
90User Manual
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook to answer a call. You must select a line to answer an 
incoming call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Ringing Line Preference — Incoming (Assignment)
You are connected to a call ringing on your extension automatically, when you go off-hook to 
answer a call.
— Be sure that you are in...