Panasonic Kx Td500 User Manual

User Programming
User Manual121
Programming
Conditions
Speed dial numbers are programmed in program [001] System Speed Dialing Number 
Set.
There is a maximum of 1000 names, with a maximum of 10 characters for each.
For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]. 
Display PT
Dial 002. Enter a speed dial number
(000 through 999).
002speed dial no.

Press NEXT.
NEXT
 
SPD Code?→
To enter speed dial number...

User Programming
122User Manual
User Manual References
4.3.73 System Speed Dialing 

User Programming
User Manual123
3.2.4 [004] Extension Name Set
Description
Assigns names to the extension numbers.
Selection
Extension number: 3 or 4 digits
Name: 10 characters (max.)
Default
All extension ports — Not Stored 

User Programming
124User Manual
Programming
Conditions
Each name has a maximum of 10 characters.
For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only].
Display PT
Dial 004. Enter an extension number
(3 or 4 digits).
004extension no.

Press NEXT.
NEXT
 
EXT NO?→
To enter the lowest extension
number, you can also press NEXT.
   
Press END.
END
 [When SELECT is pressed]
Repeat these steps
Enter a name.
name
Press...

User Programming
User Manual125
User Manual References
4.5.8 KX-T7235 Display Features - Call Directory
4.5.11 KX-T7431 / KX-T7433 / KX-T7436 Display Features - Call Directory 

User Programming
126User Manual
3.2.5 [005] Flexible CO Button Assignment
Description
Used to determine the use of the flexible CO buttons on Proprietary Telephones in the system.
Selection
Extension number: 3 or 4 digits 
Button Code (plus parameter, if required):
Button Code Parameter
0 (Single-CO)10101 through 31408 (trunk port physical number)
1 (DSS)3 through 4 digits (Extension number)
2 (One-Touch Dialing)24 digits max. (Telephone number)
3 (Message Waiting) None (Owner Extension) or 3 through 4...

User Programming
User Manual127
Default
For all PTs - CO button 1 = Loop-CO;
Ring tone type 2
Others = Not Stored. 95 (Release) None
97 (Alert) None
98 (Group FWD)3 through 4 digits (FDN of Incoming group) 
 (Loop-CO)None
# (Group-CO)01 through 48 (trunk group number)
CO/INTERCOM (ringer frequency)1 through 8 (ring tone type number)
Phantom (ringing on/off)1 (off) / 2 (on)
†Available when the Digital Super Hybrid System is connected to a Digital Proprietary 
Telephone capable Panasonic Voice Processing...

User Programming
128User Manual
Programming
Display PT
Dial 005. Enter an extension number
(3 or 4 digits).
005extension no.
Press NEXT.
NEXT
 
EXT NO? →
To enter the lowest extension
number, you can also press NEXT.

Repeat these steps
PT-PGM Mode
005 FLEXIBLE CO
   To program another CO button of the same extension port:
CObutton codeparametersSTORE
    To program another extension port:
Press END.
END
Press SELECT.
SELECT
Enter an extension number
(3 or 4 digits).
extension no.
Go to Repeat these...

User Programming
User Manual129
Canceling
Conditions
The number of the CO buttons available for each PT varies depending on the telephone type 
.
To program 24 CO buttons, use the proprietary telephone with 24 CO buttons, such as KX-
T7230. 
If you press the same CO button again at step 5, you can select a desired ringer frequency 
for the CO button from eight types of ring tones. When you enter the tone type number (1 
through 8), you will hear the selected tone type until STORE is pressed. This...

User Programming
130User Manual
Features Guide References
1.16 Button Features
Button, Flexible
Buttons on Proprietary Telephones and DSS Consoles