Panasonic Kx Td500 User Manual

Station Programming
User Manual71
Message Waiting (MESSAGE) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Message Waiting (MESSAGE) button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Press the desired Flexible(CO,
DSS) button you wish to assign
as the Message Waiting button,Dial 3Press STORE.
AUTO DIAL
STORE3
The STORE indicator lights.
The display shows the initial programming...

Station Programming
72User Manual
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The number can be an extension number, telephone number or a feature number. Up to 24 
digits can be stored in a One-Touch Dialing button.
To store the telephone number of an outside party, a line...

Station Programming
User Manual73
Phantom Button (Assignment)
Allows you to assign a Flexible (CO) button as a Phantom button. 
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The phantom extension numbers must be assigned by System Programming  before assigning the Phantom button.
If you assign the Phantom button to one of the CO buttons (CO 13 through CO 24) on a PT 
with 24 CO buttons, such as...

Station Programming
74User Manual
Primary Directory Number (PDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as a PDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
A PDN button can be assigned to any one of the flexible CO buttons on a PT by Station, 
User or System Programming. Up to three PDN buttons can be assigned to any flexible CO 
button on a PT. However, the first...

Station Programming
User Manual75
Release Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a Release button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
SAVE Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a SAVE button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM]....

Station Programming
76User Manual
Secondary Directory Number (SDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
An SDN button should have its associated PDN button of another extension. This 
assignment is available for extensions on which at least one PDN button is already assigned 
(DN type PT). Otherwise, the SDN...

Station Programming
User Manual77
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Single-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot assign the same CO line to more than one S-CO button on a PT.
You can assign the same CO line to an S-CO button, a G-CO button and an L-CO button 
respectively.
An S-CO button assigned to a DSS button is...

Station Programming
78User Manual
Tone Through Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Tone Through button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Features Guide References
1.12 Conversation Features
End-to-End DTMF Signaling (Tone Through)
PT
Press the desired Flexible (CO,
DSS) button you wish to assign
as the Tone Through button.Dial 78.Press STORE.
AUTO DIAL
STORE87...

Station Programming
User Manual79
Two-Way Record Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Record button.
This allows you to record a conversation into your own mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section 1.3 System Features in the...

Station Programming
80User Manual
– [EXT No.2] Group No.
Two-Way Transfer Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Transfer button.
This allows you to record a conversation into a desired mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section...