Panasonic Kx Td500 User Manual

Station Programming
User Manual91
Prime Line Preference — Incoming (Assignment)
You are connected to a call on the line assigned as the prime line automatically, when you go 
off-hook to answer a call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Note
If your PT is DN type, then you cannot select ICM.
PT
Dial 3. Dial 2.Press STORE. Press the desired line access
button. 
(Selection)
ICM, S-CO, G-CO, L-CO, PDN,...

Station Programming
92User Manual
2.2.12 Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the following 
three line preferences:
a) No Line Preference
b)Idle Line Preference
c)Prime Line Preference (INTERCOM) (— default*1)
Follow the programming procedure according to your selection.
Note
If Idle Line Preference, No Line Preference or Prime Line Preference (S-CO, G-
CO or L-CO) is selected, it is not possible to access any PT features...

Station Programming
User Manual93
Idle Line Preference — Outgoing (Assignment)
When you go off-hook to make a call, you are connected to an idle line automatically.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Dial 2.Press STORE. Dial 1.
12
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.The display shows the current
status.

Pref.Out:Idle 

Station Programming
94User Manual
Prime Line Preference — Outgoing (Assignment)
When you go off-hook to make a call, you are connected to a line assigned as the prime line 
automatically.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Note
If your PT is DN type, then you cannot select ICM.
PT
Dial 3. Dial 1.Press STORE. Press the desired line access
button.
(Selection)
ICM, S-CO, G-CO, L-CO, PDN, SDN
13
AUTO DIAL...

Station Programming
User Manual95
2.2.13 Ringing Tone Selection for CO Buttons
Allows you to assign a ringer frequency to each CO (S-CO, G-CO, L-CO) or DN (PDN, SDN) 
button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Ringing Tone Type 2.
This feature applies to the following line access buttons:
S-CO, G-CO, L-CO, PDN, SDN
Press CO, PDN or SDN
which you wish to
change the ringing...

Station Programming
96User Manual
2.2.14 Ringing Tone Selection for INTERCOM Button
Allows you to assign a ringer frequency to the INTERCOM button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Ringing Tone Type 3.
The display shows the current
status
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.

(-x:tone type number)...

Station Programming
User Manual97
2.2.15 Self-Extension Number Confirmation
Allows you to display your extension port physical number and extension number.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 
— To exit the Station Programming mode: Press [PROGRAM].
Dial 6.
Press HOLD (END).
6HOLDPT
The display shows the initial programming
mode. 
extension port
physical number
10101EXT1001 

Station Programming
98User Manual
2.2.16 Station Programming Data Default Set
Allows you to return each of the following items assigned by Station Programming to their 
default settings.
a)Bilingual Display Selection (default: English)
b)Call Waiting Tone Type Assignment (default: Tone 1)
c)Full One-Touch Dialing Assignment (default: On)
d)Handset/Headset Selection (default: Handset)
e)Initial Display Selection (default: Caller ID)
f)Intercom Alert Assignment (default: Tone Call)
g)Live Call Screen Mode...

Station Programming
User Manual99
2.2.17 Station Speed Dialing Number/Name Assignment [KX-
T7235/KX-T7431/KX-T7433/KX-T7436 only]
Allows you to assign frequently dialed numbers and names to each Function button on your PT.
For KX-T7235 and KX-T7436 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
7235/7436
Press STORE. Enter the desired number
(extension number,
phone number, etc.).
desired...

Station Programming
100User Manual
To store a name
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
* Please refer to Combination Table 1 and Combination Table 2 in Section 
2.2.17 Station Speed Dialing Number/Name Assignment [KX-T7235/KX-T7431/KX-
T7433/KX-T7436 only] for information on how to enter each character.
Conditions
Up to 10 characters can be stored.
The display shows the current status.
(If nothing is...