Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual231
4.3.23 Conference, Unattended
When you are in a conference with two outside parties, you can leave the three-party 
conference allowing the other two parties to continue their conversation.
To establish an Unattended Conference
To return to the conference call
To answer Hold Recall (To return to the conference on the line)
PT
Press CONF to leave the conference.
During a conversation with two outside parties;
CONF
A CO-to-CO line call between the...

Station Features and Operation (PT/SLT)
232User Manual
Conditions
Class of Service*1
An Unattended Conference cannot be established unless the extension is allowed to transfer 
a call to an outside party by COS programming.
Limited Call Duration
The duration of an unattended conference is restricted by a system timer.
Hold Recall tone
Hold Recall tone is sent to the extension user who left the conference 50 seconds before the 
time-out.
Hold Alarm tone
An alarm tone is sent to both outside parties...

Station Features and Operation (PT/SLT)
User Manual233
Conference, Unattended
1.13 Audible Tone Features
Hold Recall
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button Assignment
4.3.21 Conference, 3-Party 

Station Features and Operation (PT/SLT)
234User Manual
4.3.24 CTI (Computer Telephony Integration) Code Entry
A CTI Code (max. 16 digits) can be sent from the KX-TD500 to the CTI application (such as 
Panasonic Call Center Management Software, CMS). The code is interpreted by the 
application for suitable action. For example, in CMS, code 20 means the ACD agent wishes to 
take a break.
The feature number of CTI Code Entry is Blank by default.
You must specify it by System Programming. For details,...

Station Features and Operation (PT/SLT)
User Manual235
4.3.25 Data Line Security
Your extension is protected against interruptions from the Call Waiting, Hold Recall, and 
Executive Busy Override features. Data communication devices, such as computers and 
facsimiles, operate uninterrupted.
Setting / Canceling
Conditions
Automatic Privacy 
Assigning Data Line Security always offers conversation privacy unless Privacy Release is 
executed.
If one extension in a conversation has set Data Line Security,...

Station Features and Operation (PT/SLT)
236User Manual
– Special dial tone after setting feature
4.3 Extension Line
– Data Line Mode
Features Guide References
1.6 Originating Features
Executive Busy Override
1.9 Answering Features
Call Waiting
1.12 Conversation Features
Data Line Security
Privacy Release
User Manual References
4.3.17 Call Waiting
4.3.33 Executive Busy Override
4.3.63 Privacy Release
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 /...

Station Features and Operation (PT/SLT)
User Manual237
4.3.26 Direct Inward System Access (DISA)
Allows an outside caller to access specific system features as if the caller is an extension in the 
system. A DISA outgoing message is used to give outside callers assistance, such as listing the 
extension numbers in the system. You can also reach extensions using a single digit (DISA 
built-in auto attendant number).
Calling an extension
From Outside Telephone
Dial the DISA 
phone number.DISA outgoing...

Station Features and Operation (PT/SLT)
238User Manual
Calling an outside party
* One of the dial tones. Please refer to Section 6.1.3 Tone List.
From Outside Telephone
Dial the DISA
phone number.DISA outgoing
messageRingback tone
DISA phone no.line access code
Enter a line access code
(9 or 801 through 848).
phone no.
Dial the phone number
of the outside party.
Dial the DISA
phone number.DISA outgoing
message
Ringback tone
DISA phone no.line access code
Enter a line access
code 
(9 or 801 through 848)....

Station Features and Operation (PT/SLT)
User Manual239
Extending the call duration while calling a CO line
Re-try
Warning for the Direct Inward System Access Users
When you enable the CO-to-CO Line Call feature of Direct Inward System Access (DISA) 
function, if a third party discovers the password (a DISA User Code) of the system, you have 
a risk that they will make illegal phone calls using your telephone line, and the cost may be 
charged to your account.
In order to avoid this problem, we strongly...

Station Features and Operation (PT/SLT)
240User Manual
Conditions
Calling an extension
You can choose Non Security, Trunk Security or All Security mode. In All Security 
mode, the caller must enter a pre-assigned DISA user code to make intercom calls.
If the DISA call is not answered within a specified period of time (DISA IRNA Time: 
60 seconds [default]), the system redirects it to the pre-determined IRNA destination. 
If IRNA destination is not programmed, the DISA call will be disconnected 10...