Home > Panasonic > System > Panasonic Kx Td500 User Manual

Panasonic Kx Td500 User Manual

Here you can view all the pages of manual Panasonic Kx Td500 User Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.

Page 261

Station Features and Operation (PT/SLT)
User Manual261
4.3.33 Executive Busy Override
You can interrupt an existing call. This establishes a 3-party conference call.
This feature can be categorized as follows:
Executive Busy Override – Barge-In (PT only)
Allows the PT user to interrupt an existing outside call (either between two outside parties 
or between an outside party and an inside party) by pressing the red lit S-CO or DN button.
Executive Busy Override – Extension
Allows the extension (PT, SLT)...

Page 262

Station Features and Operation (PT/SLT)
262User Manual
To terminate one party and talk to the other
To leave the conference
Conditions
[General]
Class of Service
Class of Service programming determines the extension that can perform this feature. 
Executive Busy Override Deny
It is possible for extension users to prevent this feature from being executed by another 
extension user.
This feature does not work if Executive Busy Override Deny or Data Line Security is 
set at either one of two extensions...

Page 263

Station Features and Operation (PT/SLT)
User Manual263
[Barge-in]

This feature is available between two extensions who share the same S-CO button.

This feature is available when one extension has an SDN button associated with the PDN 
button of the other extensions.
The pre-assigned extension users can interrupt an existing outside call even if access to that 
line is not allowed by System Programming.
Programming Guide References
2.3 Numbering Plan
– Data Line Security Set / Cancel
– Executive...

Page 264

Station Features and Operation (PT/SLT)
264User Manual
4.3.34 Executive Busy Override Deny
Allows you to prevent other extension users from interrupting your telephone conversation.
Conditions
Class of Service
Class of Service programming determines the extensions that can perform this feature.
Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial 
tone (dial tone 2) after going off-hook depending on System Programming .
With the KX-T7431,...

Page 265

Station Features and Operation (PT/SLT)
User Manual265
1.9 Answering Features
Executive Busy Override Deny
User Manual References
4.3.33 Executive Busy Override
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 

Page 266

Station Features and Operation (PT/SLT)
266User Manual
4.3.35 External Feature Access
Allows you to access special features (e.g., Call Waiting) offered by a host PBX, Centrex or 
Central Office. This feature is effective only during an outside call.
Using the FLASH button
Using the feature number
EFA
S1
S2S3
During a conversation with an outside party;
Press EFA (S2).
7230 / 7235 / 7433 / 7436
Enter the desired
service code.
code
PT
Press FLASH.
Enter the desired
service code.
code
During a conversation...

Page 267

Station Features and Operation (PT/SLT)
User Manual267
Conditions
Flash Time
The flash time must be assigned as required by the Centrex, host PBX or CO line.

FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting 
the current call.
This is determined by System Programming .

Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or 
One-Touch Dialing works as External Feature Access, not as Flash...

Page 268

Station Features and Operation (PT/SLT)
268User Manual
4.3.36 External Modem Control
Allows you to control the external modem, connected to the RS-232C port 1 by sending a pre-
assigned AT Command (for enabling Automatic Answer, etc.).
Activating an AT Command to the RS-232C port 1
Conditions
An AT Command can only be programmed by Serial Interface/remote programming 
software.
For more information about the AT Command, please refer to the modem instructions.
With the KX-T7431, KX-T7433, KX-T7436 or...

Page 269

Station Features and Operation (PT/SLT)
User Manual269
– [Serial Interface Port] PROG (Port 1)
Features Guide References
1.2 System Administration
System Programming and Diagnosis with Personal Computer
1.3 System Features
External Modem Control
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 

Page 270

Station Features and Operation (PT/SLT)
270User Manual
4.3.37 Flash
You can disconnect the current call and make another call without hanging up.
Conditions

Flash or External Feature Access
Pressing the FLASH button on a PT results in either sending Flash signal (External Feature 
Access) or disconnecting the current call (Flash). This is determined by System 
Programming .

Pressing the FLASH button re-starts the conversation duration, outputs an SMDR record 
and checks toll restriction level again....
Start reading Panasonic Kx Td500 User Manual

Related Manuals for Panasonic Kx Td500 User Manual

All Panasonic manuals