Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual271
4.3.38 Full One-Touch Dialing
The hands-free speakerphone is automatically activated. You can enter a phone number or 
access a system feature with the touch of a button.
Conditions

DSS buttons on a DSS Console can also activate this feature.

This feature must be initially assigned by Station Programming.
Programming Guide References
4.3 Extension Line
– CO Key
– PF Key
4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.7 Dialing...

Station Features and Operation (PT/SLT)
272User Manual
1.17 Display Features
Call Directory
User Manual References
2.2.3 Flexible Button Assignment
2.2.4 Full One-Touch Dialing Assignment
3.2.5 [005] Flexible CO Button Assignment
4.3.52 One-Touch Dialing
4.3.66 Redial 

Station Features and Operation (PT/SLT)
User Manual273
4.3.39 Handset Microphone Mute
While on a handset call, you can turn off your PTs handset microphone so that you can consult 
privately with others in the room. When you activate Handset Microphone Mute, you can still 
listen to the other partys voice but he cannot hear your voice.
Setting
Canceling
Conditions

If you press AUTO/ANSWER/MUTE button during an OHCA call, Handset Microphone 
Mute mode will be turned on.

If you press AUTO/ANSWER/MUTE...

Station Features and Operation (PT/SLT)
274User Manual
Programming Guide References
System Programming is not required.
Features Guide References
1.15 Proprietary Telephone Features
Handset Microphone Mute
Microphone Mute
User Manual References
4.3.47 Microphone Mute 

Station Features and Operation (PT/SLT)
User Manual275
4.3.40 Hands-free Answerback
You can answer an intercom call and talk to the caller without lifting the handset.
Setting
Canceling
Conditions

Ring/Voice Intercom Alerting Mode Override
This feature overrides the Alternate Calling — Ring/Voice feature. A hands-free 
conversation mode is established as soon as a confirmation tone is sent.

This feature does not work for the following calls:
— CO calls
— Doorphone calls
— Calls to an Extension Group...

Station Features and Operation (PT/SLT)
276User Manual
— Calls to an Incoming Group
— Calls to a Phantom button
— Calls from a VM (Voice Mail) extension (except a call from a PT)
— Calls ringing on an SDN button

This feature is not available if your PT has no AUTO ANSWER/MUTE button.
It is programmable whether or not to answer the intercom call on Consultation Hold 
automatically by System Programming.
Programming Guide References
2.8 System Option
– Auto Answer with held call
Features Guide...

Station Features and Operation (PT/SLT)
User Manual277
4.3.41 Hands-free Operation
You can make an intercom / CO call and talk to the caller without lifting the handset.
Setting
Switching from the handset to hands-free mode
Switching from hands-free to the handset mode
PT
Press SP-PHONE.
SP-PHONE
The microphone and speaker are now activated and the
hands-free operation is available.
PT
Press SP-PHONE.Hang up.
SP-PHONE
Do not replace the handset without pressing the SP-PHONE button
first, or the line will...

Station Features and Operation (PT/SLT)
278User Manual
Conditions

The hands-free mode is canceled if you do not start dialing within 10 seconds.

The KX-T7050, KX-T7350 and the KX-T7250 have a MONITOR button instead of a SP-
PHONE button. It can be used for hands-free dialing, etc., but not for a hands-free 
conversation.

You can execute hands-free mode by pressing a CO or INTERCOM or DN button without 
going off-hook.

When Full One-Touch Dialing is enabled, pressing a One-Touch Dialing, DSS,...

Station Features and Operation (PT/SLT)
User Manual279
4.3.42 Inter Office Calling
You can make a call to another extension user within the system or a tenant.
Using the handset
Using the Speakerphone
Using a DSS (Direct Station Selection) button
Conditions
Extension Number Assignment
Extension numbers (3 or 4 digits) are assigned to all extensions by System Programming 
.
Tenant Service
If Tenant Service is employed, calling to other extensions in other tenants is enabled/
disabled by System...

Station Features and Operation (PT/SLT)
280User Manual
Do Not Disturb (DND) tone: Indicates the destination extension has set the Do Not 
Disturb (DND) feature.

DSS Button
DSS buttons permit One-Touch access to an extension and provide Busy Lamp Field.

You can assign a DSS button on a Proprietary Telephone (PT) or DSS Console by Station, 
User or System Programming.
Definition of busy extension status
— Off-hook
— ICM button is not idle
— There is no idle DN buttons on a PT
— Off-hook
— While...