Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual321
4.3.51 Off-Hook Monitor
While you are on a handset call, your call can be monitored by the other people in the room 
through SP-PHONE.
Setting
Switching from off-hook monitor to handset call
Switching from off-hook monitor to hands-free mode
DPT
The SP-PHONE indicator light turns red.
Your handset call is heard through the
SP-PHONE.
While on a handset call;
SP-PHONE
Press SP-PHONE.
While in the off-hook monitor mode;
SP-PHONE
Press SP-PHONE.
The...

Station Features and Operation (PT/SLT)
322User Manual
Conditions
This feature is available for the following PT extensions only: KX-7431, KX-T7433, KX-
T7436
If the SP-PHONE button is pressed during a handset call, either Off-Hook Monitor or SP-
PHONE mode (hands-free mode) will be established. This is determined by System 
Programming .
Making an OHCA call is not available if the other extension is in Off-Hook Monitor mode.
Programming Guide References
2.8 System Option
– Off-hook Monitor
Features...

Station Features and Operation (PT/SLT)
User Manual323
4.3.52 One-Touch Dialing
Allows you to make a call (intercom or outside) or access a system feature with the touch of a 
button. This is done by storing an extension number, telephone number or feature number (up 
to 24 digits) in a One-Touch Dialing button.
Dialing
Conditions

One-Touch Dialing button can be programmed by Station, User or System Programming.

If you store the telephone number of an outside party, a CO line access code (9, 801...

Station Features and Operation (PT/SLT)
324User Manual
Programming Guide References
4.3 Extension Line
– CO Key
– PF Key
4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.7 Dialing Features
Full One-Touch Dialing
One-Touch Dialing
User Manual References
2.2.3 Flexible Button Assignment
2.2.4 Full One-Touch Dialing Assignment
3.2.5 [005] Flexible CO Button Assignment
5.2.13 One-Touch Dialing Button (Assignment)
5.2.14 One-Touch Access Assignment for System Features
5.2.23 One-Touch...

Station Features and Operation (PT/SLT)
User Manual325
4.3.53 Operator Call
Allows you to call an operator within the system.
Conditions
If no operator is assigned, this feature is not available and you will hear a reorder tone after 
dialing the feature number.
Operator FDN
The treatment of incoming calls to Operator is decided according to Operator FDN setting 
of the tenant . 
— If the FDN for Operator Group is set as the destination of Extension Group or Incoming 
Group, calls by the feature number...

Station Features and Operation (PT/SLT)
326User Manual
2.3 Numbering Plan
– Operator Call
3.3 Extension Group
– FDN
– Group Type
– Tenant No.
– [Overflow Setting] Destination – Day / Night
– [Overflow Setting] Timer
– [Operator Setting] Ringing Type
– [Operator Setting] Call Priority
3.5 Incoming Group
– FDN
– Group Type
– [Overflow Setting] Destination - Day / Night
– [Overflow Setting] Timer
– [Operator Setting] Ringing Type
– [Operator Setting] Call Priority
4.2 Trunk Line
– Trunk Line –...

Station Features and Operation (PT/SLT)
User Manual327
4.3.54 Outward Dialing, Trunk Access
There are the following your ways to select an idle CO line for making a call.
Trunk Access – Idle
Type Description How to access
IdleSelects an idle CO line automatically 
from the trunk groups assigned to the 
extension.Dial the feature number for 
Local CO Line Access / ARS 
(default=9).
Or press a Loop-CO (L-CO) 
Button. 
DirectSelects an idle CO line by pressing an 
idle CO button directory.Press an idle CO...

Station Features and Operation (PT/SLT)
328User Manual
Trunk Access – Direct
Trunk Access – Individual Trunk
PT
Press CO.Dial the phone number.
phone no.
Lift the handset 
or press 
SP-PHONE/MONITOR.Hang up or press SP-PHONE/MONITOR. Dial toneTalk.
(CO)
The CO indicator light turns green.The display shows the phone number.
You may press a CO button (S-CO, 
G-CO or L-CO) button directly 
without first going off-hook.
PT
Press CO assigned as
Single-CO.Dial the phone number.
phone no.
Lift the handset
or...

Station Features and Operation (PT/SLT)
User Manual329
Trunk Access – Trunk Group
Conditions
[General]
Class of Service (COS) programming
COS programming determines the trunk group available for each extension user .

All PTs in the system have one L-CO button by default.
Flexible CO Button Assignment
A flexible CO button can be assigned as an S-CO, G-CO or L-CO button by Station, User 
or System Programming as follows:
Button Type Assignable parameters
Single-CO (S-CO)A specific outside line is...

Station Features and Operation (PT/SLT)
330User Manual
After dialing the feature number or pressing the CO button, you will hear one of the 
following tones:
Dial tone: Indicates an idle CO line is seized.
—is shown on the display, if available. (xxxxx: trunk port physical number)
Busy tone: Indicates the selected CO line is busy.
—is shown on the display, if available.
Reorder tone:
1) Indicates the CO line you have attempted to access is not assigned.
—is shown on the display, if available.
2)...