Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual371
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button Assignment
4.3.52 One-Touch Dialing
4.3.72 Station Speed Dialing
4.3.73 System Speed Dialing 

Station Features and Operation (PT/SLT)
372User Manual
4.3.71 Station Program Clear
Allows you to reset the following station features to the default settings.
Clearing the current feature settings
(a)Absent Message Capability (The message set on your 
extension)
(b)Automatic Callback Busy 
(c)Background Music that has been turned on
(d)Call Forwarding, Do Not Disturb (DND) 
(e)Call Log, Incoming
(f)Call Pickup Deny
(g)Call Waiting (BSS, OHCA, Whisper OHCA)
(h)Data Line Security
(i)Executive Busy...

Station Features and Operation (PT/SLT)
User Manual373
Conditions
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
Programming Guide References
2.3 Numbering Plan
– Station Program Clear
Features Guide References
1.15 Proprietary Telephone Features
Station Program Clear
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 

Station Features and Operation (PT/SLT)
374User Manual
4.3.72 Station Speed Dialing
Allows you to store up to 10 speed dial numbers at your extension. These numbers are available 
for your extension only.
Storing the phone number
Dialing
Conditions
You can store an extension number, a telephone number, or a feature number up to 24 digits. 
Valid digits are 0 through 9,   and PAUSE button. For SLT users, PAUSE (pausing 
time) can be stored by dialing  .
To store the telephone number of an outside party,...

Station Features and Operation (PT/SLT)
User Manual375
The SLT may be replaced with a PT temporarily to store One-Touch dialing into memory. 
The Function Buttons (F1 through F10) correspond to speed dial numbers as follows:
F1 — 0
F2 — 1
F3 — 2
F4 — 3
F5 — 4
F6 — 5
F7 — 6
F8 — 7
F9 — 8
F10 — 9
Programming Guide References
2.3 Numbering Plan
– Speed Dialing - Station
– Speed Dialing - Station Programming
4.3 Extension Line
– CO Key
– PF Key
4.4 DSS Console
– DSS Key
– PF Key
Features Guide...

Station Features and Operation (PT/SLT)
376User Manual
4.3.73 System Speed Dialing 
Allows you to make a call using speed dial numbers programmed previously. This system 
supports 2000 speed dial numbers which are available to all extension users.
Conditions
System Speed Dial numbers must be stored either by User or System Programming.
Tenant Service
If Tenant Service is employed, up to 2000 Speed Dialing codes can be shared among each 
tenant under the condition of up to 1000 codes per tenant.
Toll...

Station Features and Operation (PT/SLT)
User Manual377

If a stored feature number includes   or #, rotary or pulse SLTs cannot use it.
Programming Guide References
2.2 Tenant
– System Speed Dialing Entries Max.
– System Speed Dial TRS Level Override
2.3 Numbering Plan
– Speed Dialing - System
5.2 System Speed Dialing
– Name
– Number
Features Guide References
1.6 Originating Features
Toll Restriction Override for System Speed Dialing
1.7 Dialing Features
System Speed Dialing
1.17 Display Features...

Station Features and Operation (PT/SLT)
378User Manual
4.3.74 Timed Reminder (Wake-Up Call)
Allows you to set your extension to sound an alarm once or daily at a preset time.
Each telephone can be set to generate an alarm tone at a preset time as a reminder. When this 
feature is set, an alarm tone will ring for 30 seconds (default) at the programmed time.
Wake-up call
If a voice message is recorded beforehand, wake-up message is heard instead of an alarm tone 
when an extension user goes off-hook.
This...

Station Features and Operation (PT/SLT)
User Manual379
Canceling
Checking the setting time
Stopping the alarm
Dial 7610.Lift the handset or press
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR. Confirmation tone
and dial tone
1067

Alarm Cancelled PT and SLT
Display PT
Dial 7612.Lift the handset or press
SP-PHONE.Hang up or press
SP-PHONE.
1267
Dial tone
If “10:10 AM” has been set:

— one time
or
 — daily
Alarm  10:10AM* Alarm  10:10AM
Lift the handset.
Pressing any key also stops the alarm (PT...

Station Features and Operation (PT/SLT)
380User Manual
Unanswered Timed Reminder Alert [PT only]
If an extension user has not responded to the wake-up call, the Alert button (assigned on the 
Alert Extension) light turns red.
The Alert button can be used to confirm the not-responded room number and to call back the 
room.
To confirm the extension which did not answer the timed reminder alert
To call the unanswered extension
Conditions
System Time
The system clock must be set before the alarm is set.
If...