Panasonic Kx Td500 User Manual
Here you can view all the pages of manual Panasonic Kx Td500 User Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.
Page 361
Station Features and Operation (PT/SLT) User Manual361 4.3.66 Redial Redial feature can be categorized as the following two types. Redialing the last outside phone number you dialed (Last Number Redial) Saving the outside phone number for redialing (Saved Number Redial) Dialing Type Description Last NumberSaves the last telephone number dialed to a CO line and allows the extension user to dial the same number again. Saved NumberAllows the PT user to save a telephone number while in conversation on a CO...
Page 362
Station Features and Operation (PT/SLT) 362User Manual Conditions [General] Up to 24 digits (excluding the CO line access code) can be stored and redialed. , #, PAUSE, and INTERCOM (for secret dialing) are counted as one digit. If Full One-Touch Dialing feature is enabled at the extension, there is no need to go off- hook, before pressing the REDIAL or SAVE button. [Last Number] The memorized telephone number is replaced by a new one if at least one digit sent to a CO line is dialed. Dialing a CO...
Page 363
Station Features and Operation (PT/SLT) User Manual363 2.2.4 Full One-Touch Dialing Assignment 3.2.5 [005] Flexible CO Button Assignment
Page 364
Station Features and Operation (PT/SLT) 364User Manual 4.3.67 Released Link Operation When Released Link Operation is enabled by System Programming, you will be automatically released from a call (extension, outside) after transferring it to the destination, if the destination extension is idle. This feature simplifies the transfer operation by eliminating the need for going on-hook or pressing the RELEASE button after transferring the call. This feature is convenient for extension users, such as...
Page 365
Station Features and Operation (PT/SLT) User Manual365 1.11 Transferring Features Call Transfer User Manual References None
Page 366
Station Features and Operation (PT/SLT) 366User Manual 4.3.68 Ringing Transfer Allows a DN type PT user to transfer a call on the SDN button (flexible button) to the owner extension of the SDN which has the PDN button associated with it simply by pressing the SDN button. Ringing transfer can be done either with or without announcement. Screened Call Transfer Unscreened Call Transfer PT (DN type) Announce. Wait for an answer. During a conversation on an SDN button; Hang up or press SP-PHONE.Press SDN...
Page 367
Station Features and Operation (PT/SLT) User Manual367 Conditions If the owner extension is in the Station or User Programming mode, Ringing Transfer does not function. FWD/DND Override The call transferred by this features rings the PDN owner extension even if Call Forwarding or Do Not Disturb feature is assigned on it. A call made by this feature rings the destination PDN button immediately even if delayed ringing or no ring is set on that PDN button. Please refer to Section 2.2.9 PDN/SDN...
Page 368
Station Features and Operation (PT/SLT) 368User Manual 4.3.69 Secret Busy Override You can interrupt an existing call (either between two inside parties or between an inside party and an outside party) without informing the other party. Some extensions may be restricted from performing this function. To interrupt an existing call To change to the three-party conference call 7230 / 7235 / 7433 / 7436 Dial 2. If you hear a busy tone after making an intercom call; 2 Over S1 S2S3 If you hear a busy tone...
Page 369
Station Features and Operation (PT/SLT) User Manual369 Conditions Class of Service (COS) programming COS programming determines the extension users who can perform this feature. This feature does not work if Executive Busy Override Deny or Data Line Security is set at either one of two extensions or both of them. Party A and Party B are in conversation. This feature works as follows so that both party A and party B do not know that their conversation is being monitored by Party C: — The display...
Page 370
Station Features and Operation (PT/SLT) 370User Manual 4.3.70 Secret Dialing Allows you to conceal all or part(s) of a System Speed Dialing or One-Touch Dialing number assigned to a flexible button on your PT and DSS Console which normally appears on the display. Additionally, KX-T7431, KX-T7433, KX-T7436 and KX-T7235 Model Telephones are capable of Secret Dialing for Station Speed Dialing numbers. Conditions The secret code, [ or ] (pressing the INTERCOM button), are counted as one digit. You can...