Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual221
4.3.20 Calling Line Identification Restriction (CLIR) / Calling 
Name Identification Restriction (CNIR)
When making an outside call through an ISDN line, you can prevent the other party from 
seeing you identification number/name. You can change the setting at any time for a particular 
call. This is one of the ISDN supplementary service.
To restrict the presentation of your number/name to the other party
To present your number/name to the other...

Station Features and Operation (PT/SLT)
222User Manual
To change the setting at any time for a particular call
Conditions
If the presentation is enabled, the other party can check the callers number/name before 
answering the call.
Programming Guide References
2.3 Numbering Plan
– CLIR/CNIR
Features Guide References
2.2 ISDN Originating Features
Calling Line Identification Presentation (CLIP)
Calling Line Identification Restriction (CLIR)
Calling Name Identification Presentation (CNIP)
Calling Name...

Station Features and Operation (PT/SLT)
User Manual223
4.3.21 Conference, 3-Party
During a two-party conversation, you can add a third party to make a three-party conference. 
The members of a conference on a line may be three extensions, one extension and two CO 
lines, or two extensions and one CO line.
To establish a 3-party conference
SLT
PT
Dial desired 
partys 
number.Talk to the 
third party.
During a two-party conversation;
Flash the 
switchhook.Dial 3.Flash the 
switchhook.
A three-party...

Station Features and Operation (PT/SLT)
224User Manual
To leave a 3-party conference
To terminate one party and talk to the other
To talk to the third party while holding the original party
PT and SLT
Hang up or press SP-PHONE.
The other two parties may continue their conversation.
If both other two parties are on outside lines, they will be disconnected.
PT
A conversation with the desired party is established and the other party is
disconnected.
This operation is available only when the extension user...

Station Features and Operation (PT/SLT)
User Manual225
To talk to the original party while holding the third party
To put both parties on hold
Conditions
Conference call arrangement
A conference call can be one of the following three arrangements:
1-inside and 2-outside; 2-inside and 1-outside; and 3-inside.
Conference trunk
Up to eight conference calls are available at a time by default. If optional TSW Conference 
Expansion card is installed, up to 64 conference calls are available at a time....

Station Features and Operation (PT/SLT)
226User Manual
leaving the other two parties connected unless they both are on CO lines. If they both are 
on CO lines, they will be disconnected.

You can return to the original party before the third party answers by pressing the 
TRANSFER button.
If a CONF button is not provided on your PT, it can be assigned to a flexible (CO, DSS, PF) 
button by Station, User or System Programming.
Call Splitting 
During a 3-party conference call, the conference originator...

Station Features and Operation (PT/SLT)
User Manual227
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button Assignment
4.3.23 Conference, Unattended
4.3.33 Executive Busy Override
4.3.63 Privacy Release 

Station Features and Operation (PT/SLT)
228User Manual
4.3.22 Conference, 5-Party
A PT user can originate a 5-party conference call which includes outside or inside parties or 
both in any combination.
To establish a 5-party conference
PT
Dial 52   .

Repeat these steps
Dial extension/phone number 
of the other party
extension / phone no.
You must dial a line access code (9 or 801 
through 848) as the leading digit(s) when 
calling an outside party.
52
Conference Start
Lift the handset or press...

Station Features and Operation (PT/SLT)
User Manual229
To terminate the 5-party conference (conference originator only)
Conditions
Up to two 5-party conference calls can be held at a time in the system, even if TSW 
Conference Expansion card is installed on the TSW card.
Conference call arrangement
A 5-party conference call can include both inside and outside parties in any combination.
Conference trunk
At least three idle conference trunks are required to establish a 5-party conference call....

Station Features and Operation (PT/SLT)
230User Manual
Features Guide References
1.12 Conversation Features
Conference, 5-Party
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button Assignment