Panasonic Kx Td500 User Manual

Station Features and Operation (PT/SLT)
User Manual201
Programming Guide References
2.3 Numbering Plan
– Dial Call Pickup Deny Set / Cancel
2.8 System Option
– Special dial tone after setting feature
4.3 Extension Line
– Call Pickup Deny
Features Guide References
1.9 Answering Features
Call Pickup
User Manual References
4.3.13 Call Pickup
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 

Station Features and Operation (PT/SLT)
202User Manual
4.3.15 Call Splitting
Allows you to have two callers on a line and alternate between them. If a call comes in while 
you are already on the line, you can place the current call (1st call) on hold and have a 
conversation with the other party (2nd call).
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on hold temporarily (Consultation Hold
*1)
When you are engaged in the 2nd call (inside), while...

Station Features and Operation (PT/SLT)
User Manual203
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on (exclusive) hold
Conditions
This feature does not work during a doorphone call or paging.
Programming Guide References
System Programming is not required.
Features Guide References
1.10 Holding Features
Call Splitting
Consultation Hold
1.12 Conversation Features
Conference, 3-Party
User Manual References
4.3.11 Call Hold
PT
Press CO or INTERCOM...

Station Features and Operation (PT/SLT)
204User Manual
4.3.16 Call Transfer
You can transfer a call (intercom, CO, TIE) to another extension or external party.
The following types are available.
Transferring a call to an extension (Screened)
Feature Type Transferring Method
Screened to ExtensionTransfers a call to the extension or the external party after a 
voice announcement.
to CO/TIE Line
Unscreened to ExtensionTransfers a call to the extension or the external party without a 
voice announcement....

Station Features and Operation (PT/SLT)
User Manual205
Transferring a call to an extension (Unscreened)
Transferring a call to the Remote Resource (Unscreened)
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the switchhook.
For SLT For PT
During a conversation;
Hang up or press
SP-PHONE/MONITOR. Confirmation
tone and
dial toneRingback
tone
TRANSFER
Ringing starts at the destination extension. The other party is placed on hold.
Dial the destination
extension number 
(3 or 4 digits) or 
press DSS...

Station Features and Operation (PT/SLT)
206User Manual
One-Touch Transfer
Transferring a call to an external party via a CO or TIE line (Screened)
PT
Press DSS (flexible button).
During a conversation with an external party;
The other party is placed on hold and the destination extension
is called immediately.
(DSS)
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the switchhook.Dial the phone
number where
calls will be
transferred.
For SLT For PTphone no.
During a conversation;
Hang up or press...

Station Features and Operation (PT/SLT)
User Manual207
Transferring a call to an external party via a CO or TIE line (Unscreened)
Conditions
[General]
Music on Hold or Ringback Tone
If Music on Hold is enabled, music is sent to the caller while being transferred. It is 
system programmable whether to send a ringback tone or Music on Hold to the caller 
.

If you mis-dial the destination telephone number, press the FLASH button to clear the 
number entered. Then you can enter a new number again.

If...

Station Features and Operation (PT/SLT)
208User Manual
2.4 Class of Service (COS), Automatic Hold in the Programming Guide>. However, it 
cannot be performed when there is another call on Consultation Hold.
DSS Button
DSS buttons are provided on a DSS Console by default.
A flexible CO/DSS button can be assigned as a DSS button by Station, User or System 
Programming.
Ringing Pattern
A call transferred to an extension will ring following the regular ringing pattern depending 
on the type of call...

Station Features and Operation (PT/SLT)
User Manual209
[Unscreened – To Extension]
Transfer Recall Destination
If the call (intercom, CO, TIE) transferred to the destination extension is not answered 
within a specified period of time , it may ring an Operator extension instead of the extension who 
originally transferred it. This is determined by System Programming .
When Transfer Recall occurs, the display shows:

Automatic Disconnection
If there is no answer for 30 minutes after Transfer Recall...

Station Features and Operation (PT/SLT)
210User Manual
– DSS Key
Features Guide References
1.3 System Features
Limited Call Duration
Music on Hold
Released Link Operation
1.10 Holding Features
Automatic Hold—For Hold
1.11 Transferring Features
Call Transfer
One-Touch Transfer
1.12 Conversation Features
Conference, 3-Party
1.13 Audible Tone Features
Hold Recall
3.1 TIE Line Features
TIE Line Service 
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button...