Panasonic Kx Taw848 Programing Manual

2.9 [3] Group
PC Programming Manual 241
Feature Manual References
1.6.6 FWD (Call Forwarding)
VM DTMF Command—Recording Message
Specifies the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or 
transferred to the VPS, so that the caller can leave a message in a certain mailbox.
Default
H
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual...

2.9 [3] Group
242 PC Programming Manual
Default
#8
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Command—Switching to VM
Specifies the DTMF command the PBX sends to the VPS to switch from AA Service Mode to VM 
Service Mode.
Default
#6
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P...

2.9 [3] Group
PC Programming Manual 243
Programming Manual References
None
Feature Manual References
None
Timing—Inter-digit Time
Specifies the length of pause time between DTMF signals the PBX sends to the VPS.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Timing—Waiting Time before Sending Follow on ID
Specifies the length of time that the PBX waits before sending the...

2.9 [3] Group
244 PC Programming Manual
Timing—Waiting Time before Sending VM DTMF Status Signal
Specifies the length of time that the PBX waits before sending the DTMF status signal to the VPS 
after the VPS has finished dialing.
Default
1.5 s
Value Range
0.5 s, 1.0 s, 1.5 s, 2.0 s
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Others—Call Waiting on VM Group
Enables the queuing of calls when all extension...

2.9 [3] Group
PC Programming Manual 245
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Others—Intercept Routing to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is intercepted to the 
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also 
possible to send no...

2.9 [3] Group
246 PC Programming Manual
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—Programmed 
Mailbox No.
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No.
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No.
Feature Manual References
None
Others—Message Waiting Lamp Control
Specifies whether the PBX or VPS cancels the Message Waiting feature (e.g., turning off the 
MESSAGE button...

2.9 [3] Group
PC Programming Manual 247
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
Group Name
Specifies the name of the VM (DTMF) group, which will be shown on the display of extensions that 
call the VM (DTMF) group.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature...

2.9 [3] Group
248 PC Programming Manual
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Select the group to program from the VM(DTMF) Group Number list.
To assign members to the group, enter directly or click Extension Number Setting (see 2.1.6 
Extension Number Setting). To copy members to another group, click Member List Copy, select 
the group, and click OK.
Extension Number of the SLT Port Connected to VM
Specifies the extension number assigned to the SLT port that is connected to the VPS....

2.9 [3] Group
PC Programming Manual 249
2.9.21 [3-9] PS Ring Group
A PS ring group is a group of PS extensions that receives incoming calls. Each group has a floating 
extension number and name. One PS can belong to multiple PS ring groups. A maximum of 32 PS 
ring groups can be programmed, each containing up to 28 PS extensions.
To add PSs to the PS Ring Group, click Member List.
Floating Extension Number
Specifies the floating extension number of the PS ring group.
Default
Not stored.
Value Range
Max....

2.9 [3] Group
250 PC Programming Manual
Incoming Trunk Call Information Display
Specifies the information of the incoming CO line call to be shown on the displays of the PSs that 
belong to the PS ring group. If the callers name or called partys name is not recognized, the 
telephone number will be shown.
Default
Caller ID
Value Range
Caller ID, Called Number
Maintenance Console Location
2.9.21 [3-9] PS Ring Group
Programming Manual References
None
Feature Manual References
1.13.14 PS Ring Group
2.9.22...