Panasonic Kx Taw848 Programing Manual

2.8 [2] System
PC Programming Manual 191
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Mark Signal bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Default
180 bits
Value Range
10 × n (n=3–40) bits
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Channel Seizure Wait Time
Specifies the length of time that the PBX waits before starting to...

2.8 [2] System
192 PC Programming Manual
Additional Local Trunk Access Code to Extension Caller ID
Enables the PBX to automatically add a CO Line Access number to the received telephone number 
when sending the Caller ID number of an incoming CO line call to an SLT.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Send Caller ID Date & Time to Extension 
Enables the PBX...

2.8 [2] System
PC Programming Manual 193
Value Range
Disable, Enable
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Send Caller ID Long Distance to Extension
Enables the PBX to send a call qualifier (Long Distance) (if received from the CO line) when sending 
Caller ID information to an SLT.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming...

2.8 [2] System
194 PC Programming Manual
Maintenance Console Location
2.8.19 [2-11-1] Audio Gain—Paging/MOH
Programming Manual References
2.9.6 [3-4] Paging Group
Feature Manual References
1.13.1 Paging
MOH—(Music On Hold)
Specifies the music volume for the External BGM.
Default
9 dB
Value Range
-11–11 dB
Maintenance Console Location
2.8.19 [2-11-1] Audio Gain—Paging/MOH
Programming Manual References
2.8.3 [2-2] Operator & BGM
Feature Manual References
1.2.1 BGM (Background Music)
1.11.4 Music on Hold...

2.8 [2] System
PC Programming Manual 195
Programming Manual References
None
Feature Manual References
None
Down Gain (From PBX)
Specifies the volume for audio signals from the PBX to the selected type of card.
Default
Depends on card type.
Value Range
-15–15 dB
Maintenance Console Location
2.8.20 [2-11-2] Audio Gain—Card
Programming Manual References
None
Feature Manual References
None 

2.9 [3] Group
196 PC Programming Manual
2.9 [3] Group
2.9.1 [3-1-1] Trunk Group—TRG Settings
CO lines can be organized into trunk groups. The settings of each trunk group determine the settings 
of the CO lines within that group. A maximum of 64 trunk groups can be programmed.
For more information on trunk groups, see 1.7.1 GROUP FEATURES in the Feature Manual.
Main
Group Name
Specifies the name of the trunk group for programming reference.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance...

2.9 [3] Group
PC Programming Manual 197
2.15.1 [9-1] CO Line Settings
Feature Manual References
None
Line Hunting Order
Specifies the CO line hunting sequence for the trunk group. The hunting sequence can be 
programmed to start from the lowest or highest numbered CO lines, or to rotate uniformly among all 
CO lines.
Default
High -> Low
Value Range
High -> Low, Low -> High, Rotation
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.15.1 [9-1] CO Line...

2.9 [3] Group
198 PC Programming Manual
Extension-CO Duration Time
Specifies the length of time that an extension-to-CO line call can be maintained before being 
disconnected.
Default
10 min
Value Range
None, 1–60 min
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
2.8.17 [2-9] System Options
2.15.1 [9-1] CO Line Settings
Feature Manual References
1.3.12 CO Line Call Limitation
Caller-ID Modification Table...

2.9 [3] Group
PC Programming Manual 199
Value Range
1–4
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.12.7 [6-7] Dialing Plan
Feature Manual References
None
Tone Detection
Group Name
Specifies the name of the trunk group for programming reference.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.15.1 [9-1] CO Line Settings
Feature Manual References...

2.9 [3] Group
200 PC Programming Manual
Programming Manual References
2.11.3 [5-3-1] Voice Message—DISA System
2.15.1 [9-1] CO Line Settings
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated CO-to-CO line call line call by continuous signal 
detection.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.11.3 [5-3-1] Voice...