Panasonic Kx Taw848 Programing Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Programing Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 221
![Page 221
2.9 [3] Group
PC Programming Manual 221
Value Range
None, 1–15
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Maximum No. of Busy Extensions
Specifies the number of extensions that can accept calls simultaneously in the incoming call
distribution group.
Default
Max.
Value Range
Max: Call arrives at an idle extension.
1–32 : Call will not arrive at an idle...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-220.png "Page 221
2.9 [3] Group
PC Programming Manual 221
Value Range
None, 1–15
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Maximum No. of Busy Extensions
Specifies the number of extensions that can accept calls simultaneously in the incoming call
distribution group.
Default
Max.
Value Range
Max: Call arrives at an idle extension.
1–32 : Call will not arrive at an idle...")
2.9 [3] Group PC Programming Manual 221 Value Range None, 1–15 Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings Programming Manual References None Feature Manual References 1.9.3 ICD Group Features—Log-in/Log-out Maximum No. of Busy Extensions Specifies the number of extensions that can accept calls simultaneously in the incoming call distribution group. Default Max. Value Range Max: Call arrives at an idle extension. 1–32 : Call will not arrive at an idle...
Page 222
![Page 222
2.9 [3] Group
222 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
VIP Call Mode
Enables VIP Call mode, to prioritize calls received from multiple incoming call distribution groups.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.6 ICD Group Features—VIP Call
Programmed Mailbox No....](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-221.png "Page 222
2.9 [3] Group
222 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
VIP Call Mode
Enables VIP Call mode, to prioritize calls received from multiple incoming call distribution groups.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.6 ICD Group Features—VIP Call
Programmed Mailbox No....")
2.9 [3] Group 222 PC Programming Manual Programming Manual References None Feature Manual References 1.9.3 ICD Group Features—Log-in/Log-out VIP Call Mode Enables VIP Call mode, to prioritize calls received from multiple incoming call distribution groups. Default Disable Value Range Disable, Enable Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings Programming Manual References None Feature Manual References 1.9.6 ICD Group Features—VIP Call Programmed Mailbox No....
Page 223
![Page 223
2.9 [3] Group
PC Programming Manual 223
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-222.png "Page 223
2.9 [3] Group
PC Programming Manual 223
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual...")
2.9 [3] Group PC Programming Manual 223 Floating Extension Number Specifies the floating extension number of the incoming call distribution group. Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers of 2–4 digits. Default Groups 001-064: 601–664 Groups 065-128: Not stored Value Range Max. 5 digits (consisting of 0–9) Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings Programming Manual References None Feature Manual...
Page 224
![Page 224
2.9 [3] Group
224 PC Programming Manual
Value Range
0–100
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Group FWD Call from CO—Setting
Indicates the current FWD status for incoming CO line calls directed to the incoming call distribution
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-223.png "Page 224
2.9 [3] Group
224 PC Programming Manual
Value Range
0–100
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Group FWD Call from CO—Setting
Indicates the current FWD status for incoming CO line calls directed to the incoming call distribution
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group...")
2.9 [3] Group 224 PC Programming Manual Value Range 0–100 Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings Programming Manual References None Feature Manual References 1.3.3 Call Log, Incoming Group FWD Call from CO—Setting Indicates the current FWD status for incoming CO line calls directed to the incoming call distribution group (reference only). Default Off Value Range Off, On Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group...
Page 225
![Page 225
2.9 [3] Group
PC Programming Manual 225
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from Extension—Setting
Indicates the current FWD status for incoming intercom calls directed to the incoming call distribution
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-224.png "Page 225
2.9 [3] Group
PC Programming Manual 225
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from Extension—Setting
Indicates the current FWD status for incoming intercom calls directed to the incoming call distribution
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from...")
2.9 [3] Group PC Programming Manual 225 Feature Manual References 1.6.6 FWD (Call Forwarding) Group FWD Call from Extension—Setting Indicates the current FWD status for incoming intercom calls directed to the incoming call distribution group (reference only). Default Off Value Range Off, On Maintenance Console Location 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings Programming Manual References None Feature Manual References 1.6.6 FWD (Call Forwarding) Group FWD Call from...
Page 226
![Page 226
2.9 [3] Group
226 PC Programming Manual
2.9.10 [3-5-2] Incoming Call Distribution Group—Queuing Time
Ta b l e
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are
handled. A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
None
Value Range
None: Redirects the call to the next sequence
Overflow: Redirects the call to the overflow destination when there...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-225.png "Page 226
2.9 [3] Group
226 PC Programming Manual
2.9.10 [3-5-2] Incoming Call Distribution Group—Queuing Time
Ta b l e
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are
handled. A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
None
Value Range
None: Redirects the call to the next sequence
Overflow: Redirects the call to the overflow destination when there...")
2.9 [3] Group 226 PC Programming Manual 2.9.10 [3-5-2] Incoming Call Distribution Group—Queuing Time Ta b l e A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are handled. A maximum of 64 Queuing Time Tables can be programmed. Queuing Sequence—Sequence 01–16 Specifies the command activated by the corresponding sequence. Default None Value Range None: Redirects the call to the next sequence Overflow: Redirects the call to the overflow destination when there...
Page 227
![Page 227
2.9 [3] Group
PC Programming Manual 227
Value Range
Disable, Enable
Maintenance Console Location
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous
Programming Manual References
None
Feature Manual References
1.9.1 ICD GROUP FEATURES
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Each incoming call distribution group can have a maximum of 32 members (extensions) assigned to
it, and each member can have its own delayed ringing and Wrap-up time settings. An extension can
be a member of...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-226.png "Page 227
2.9 [3] Group
PC Programming Manual 227
Value Range
Disable, Enable
Maintenance Console Location
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous
Programming Manual References
None
Feature Manual References
1.9.1 ICD GROUP FEATURES
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Each incoming call distribution group can have a maximum of 32 members (extensions) assigned to
it, and each member can have its own delayed ringing and Wrap-up time settings. An extension can
be a member of...")
2.9 [3] Group PC Programming Manual 227 Value Range Disable, Enable Maintenance Console Location 2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous Programming Manual References None Feature Manual References 1.9.1 ICD GROUP FEATURES 2.9.12 [3-5-4] Incoming Call Distribution Group—Member Each incoming call distribution group can have a maximum of 32 members (extensions) assigned to it, and each member can have its own delayed ringing and Wrap-up time settings. An extension can be a member of...
Page 228
![Page 228
2.9 [3] Group
228 PC Programming Manual
Value Range
Max. 20 characters
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.21 [3-9] PS Ring Group—Group Name
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
Feature Manual References
1.9.1 ICD GROUP FEATURES
Delayed Ring
Specifies the delayed ringing setting of each member. (Applicable when the call...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-227.png "Page 228
2.9 [3] Group
228 PC Programming Manual
Value Range
Max. 20 characters
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.21 [3-9] PS Ring Group—Group Name
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
Feature Manual References
1.9.1 ICD GROUP FEATURES
Delayed Ring
Specifies the delayed ringing setting of each member. (Applicable when the call...")
2.9 [3] Group 228 PC Programming Manual Value Range Max. 20 characters Maintenance Console Location 2.9.12 [3-5-4] Incoming Call Distribution Group—Member Programming Manual References 2.9.21 [3-9] PS Ring Group—Group Name 2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name 2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name Feature Manual References 1.9.1 ICD GROUP FEATURES Delayed Ring Specifies the delayed ringing setting of each member. (Applicable when the call...
Page 229
![Page 229
2.9 [3] Group
PC Programming Manual 229
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
Hunting Type
Specifies the hunting type for the hunting group.
Default
Circular
Value Range
Circular: Circulates until the call is answered or overflowed
Terminated: Terminates at the last extension
Maintenance Console Location
2.9.13 [3-6] Extension Hunting...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-228.png "Page 229
2.9 [3] Group
PC Programming Manual 229
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
Hunting Type
Specifies the hunting type for the hunting group.
Default
Circular
Value Range
Circular: Circulates until the call is answered or overflowed
Terminated: Terminates at the last extension
Maintenance Console Location
2.9.13 [3-6] Extension Hunting...")
2.9 [3] Group PC Programming Manual 229 Default Not stored. Value Range Max. 20 characters Maintenance Console Location 2.9.13 [3-6] Extension Hunting Group Programming Manual References None Feature Manual References 1.9.7 Idle Extension Hunting Hunting Type Specifies the hunting type for the hunting group. Default Circular Value Range Circular: Circulates until the call is answered or overflowed Terminated: Terminates at the last extension Maintenance Console Location 2.9.13 [3-6] Extension Hunting...
Page 230
![Page 230
2.9 [3] Group
230 PC Programming Manual
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
2.9.14 [3-6] Extension Hunting Group—Member List
Each hunting group can contain up to 16 extensions. Select the hunting group to program from the
Hunting Group No. list.
To assign members to the group, enter the extension numbers in Extension Number or click
Extension Number Setting (see 2.1.6 Extension Number...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-229.png "Page 230
2.9 [3] Group
230 PC Programming Manual
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
2.9.14 [3-6] Extension Hunting Group—Member List
Each hunting group can contain up to 16 extensions. Select the hunting group to program from the
Hunting Group No. list.
To assign members to the group, enter the extension numbers in Extension Number or click
Extension Number Setting (see 2.1.6 Extension Number...")
2.9 [3] Group 230 PC Programming Manual Maintenance Console Location 2.9.13 [3-6] Extension Hunting Group Programming Manual References None Feature Manual References 1.9.7 Idle Extension Hunting 2.9.14 [3-6] Extension Hunting Group—Member List Each hunting group can contain up to 16 extensions. Select the hunting group to program from the Hunting Group No. list. To assign members to the group, enter the extension numbers in Extension Number or click Extension Number Setting (see 2.1.6 Extension Number...