Panasonic Kx Taw848 Programing Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Programing Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 261
![Page 261
2.10 [4] Extension
PC Programming Manual 261
Feature Manual References
None
Intercept No Answer Time—Day, Lunch, Break, Night
Specifies the length of time until an unanswered call is redirected to the intercept routing destination
in each time mode.
When this setting is set to 0, the system timer is used.
Default
0
Value Range
0–240 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall /...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-260.png "Page 261
2.10 [4] Extension
PC Programming Manual 261
Feature Manual References
None
Intercept No Answer Time—Day, Lunch, Break, Night
Specifies the length of time until an unanswered call is redirected to the intercept routing destination
in each time mode.
When this setting is set to 0, the system timer is used.
Default
0
Value Range
0–240 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall /...")
2.10 [4] Extension PC Programming Manual 261 Feature Manual References None Intercept No Answer Time—Day, Lunch, Break, Night Specifies the length of time until an unanswered call is redirected to the intercept routing destination in each time mode. When this setting is set to 0, the system timer is used. Default 0 Value Range 0–240 s Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall /...
Page 262
![Page 262
2.10 [4] Extension
262 PC Programming Manual
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-261.png "Page 262
2.10 [4] Extension
262 PC Programming Manual
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click...")
2.10 [4] Extension 262 PC Programming Manual Por t Indicates the port number (reference only). Default Current port number Value Range Port number Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None Extension Number Specifies the extension number of the extension. To change the extension number of a wired extension, follow the steps below: 1.Type the new extension number, then click...
Page 263
![Page 263
2.10 [4] Extension
PC Programming Manual 263
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To
enable Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after
assigning...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-262.png "Page 263
2.10 [4] Extension
PC Programming Manual 263
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To
enable Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after
assigning...")
2.10 [4] Extension PC Programming Manual 263 Extension Name Specifies the name of the extension. Default Not stored. Value Range Max. 20 characters Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References None Feature Manual References None Wireless XDP Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To enable Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning...
Page 264
![Page 264
2.10 [4] Extension
264 PC Programming Manual
Value Range
1–8
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Feature Manual References
1.15.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the extensions mailbox for Voice Processing Systems (VPS) with
DTMF...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-263.png "Page 264
2.10 [4] Extension
264 PC Programming Manual
Value Range
1–8
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Feature Manual References
1.15.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the extensions mailbox for Voice Processing Systems (VPS) with
DTMF...")
2.10 [4] Extension 264 PC Programming Manual Value Range 1–8 Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.8.14 [2-8-1] Ring Tone Patterns—Call from CO 2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others Feature Manual References 1.15.2 Ring Tone Pattern Selection Programmed Mailbox No. Specifies the mailbox number of the extensions mailbox for Voice Processing Systems (VPS) with DTMF...
Page 265
![Page 265
2.10 [4] Extension
PC Programming Manual 265
Programming Manual References
None
Feature Manual References
1.3.8 Call Transfer
ARS Itemized Code
Specifies the itemized billing code used by the ARS feature for identifying calls made from the
extension for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.14.6 [8-5] Carrier
Feature Manual...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-264.png "Page 265
2.10 [4] Extension
PC Programming Manual 265
Programming Manual References
None
Feature Manual References
1.3.8 Call Transfer
ARS Itemized Code
Specifies the itemized billing code used by the ARS feature for identifying calls made from the
extension for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.14.6 [8-5] Carrier
Feature Manual...")
2.10 [4] Extension PC Programming Manual 265 Programming Manual References None Feature Manual References 1.3.8 Call Transfer ARS Itemized Code Specifies the itemized billing code used by the ARS feature for identifying calls made from the extension for accounting and billing purposes. Default Not stored. Value Range Max. 10 digits (consisting of 0–9, *, and #) Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.14.6 [8-5] Carrier Feature Manual...
Page 266
![Page 266
2.10 [4] Extension
266 PC Programming Manual
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-265.png "Page 266
2.10 [4] Extension
266 PC Programming Manual
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click...")
2.10 [4] Extension 266 PC Programming Manual Por t Indicates the port number (reference only). Default Current port number Value Range Port number Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None Extension Number Specifies the extension number of the extension. To change the extension number of a wired extension, follow the steps below: 1.Type the new extension number, then click...
Page 267
![Page 267
2.10 [4] Extension
PC Programming Manual 267
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Manual C. Waiting for Extension Call
Selects the method of receiving call waiting notification from other extensions.
Default
BSS
Value Range
Off: No notification
BSS: Tone from the handset or built-in speaker...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-266.png "Page 267
2.10 [4] Extension
PC Programming Manual 267
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Manual C. Waiting for Extension Call
Selects the method of receiving call waiting notification from other extensions.
Default
BSS
Value Range
Off: No notification
BSS: Tone from the handset or built-in speaker...")
2.10 [4] Extension PC Programming Manual 267 Extension Name Specifies the name of the extension. Default Not stored. Value Range Max. 20 characters Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References None Feature Manual References None Manual C. Waiting for Extension Call Selects the method of receiving call waiting notification from other extensions. Default BSS Value Range Off: No notification BSS: Tone from the handset or built-in speaker...
Page 268
![Page 268
2.10 [4] Extension
268 PC Programming Manual
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
Pickup Dial Set
Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is
dialed automatically after going off-hook when the Hot Line feature is active.
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-267.png "Page 268
2.10 [4] Extension
268 PC Programming Manual
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
Pickup Dial Set
Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is
dialed automatically after going off-hook when the Hot Line feature is active.
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired...")
2.10 [4] Extension 268 PC Programming Manual Value Range Off, On Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References None Feature Manual References 1.3.9 Call Waiting Tone Pickup Dial Set Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is dialed automatically after going off-hook when the Hot Line feature is active. Default Off Value Range Off, On Maintenance Console Location 2.10.1 [4-1-1] Wired...
Page 269
![Page 269
2.10 [4] Extension
PC Programming Manual 269
Feature Manual References
1.8.6 Hot Line
Data Mode
Sets or cancels the protection against tones or interruptions from other extensions during
communication.
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.1 Data Line Security
Option 3
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-268.png "Page 269
2.10 [4] Extension
PC Programming Manual 269
Feature Manual References
1.8.6 Hot Line
Data Mode
Sets or cancels the protection against tones or interruptions from other extensions during
communication.
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.1 Data Line Security
Option 3
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot...")
2.10 [4] Extension PC Programming Manual 269 Feature Manual References 1.8.6 Hot Line Data Mode Sets or cancels the protection against tones or interruptions from other extensions during communication. Default Off Value Range Off, On Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References None Feature Manual References 1.4.1 Data Line Security Option 3 Slot Indicates the slot position of each extension card (reference only). Default Current slot...
Page 270
![Page 270
2.10 [4] Extension
270 PC Programming Manual
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS,...](http://img.usermanuals.tech/thumb/58/64587/w300_kx-taw848_en_adv_pcprog_v4_om_d-269.png "Page 270
2.10 [4] Extension
270 PC Programming Manual
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS,...")
2.10 [4] Extension 270 PC Programming Manual Default Current port number Value Range Port number Maintenance Console Location 2.10.1 [4-1-1] Wired Extension—Extension Settings Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None Extension Number Specifies the extension number of the extension. To change the extension number of a wired extension, follow the steps below: 1.Type the new extension number, then click Apply. 2.Set the status of the extension port to OUS,...