Panasonic Kx Taw848 Programing Manual

2.9 [3] Group
PC Programming Manual 251
Extension Name
Indicates the name of the PS (reference only).
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.22 [3-9] PS Ring Group—Member List
Programming Manual References
2.9.21 [3-9] PS Ring Group
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
Feature Manual References
1.13.14 PS Ring Group 

2.10 [4] Extension
252 PC Programming Manual
2.10 [4] Extension
2.10.1 [4-1-1] Wired Extension—Extension Settings
For each slot in which an extension card is installed, a certain number of extension ports are 
displayed. For each extension port, various extension settings can be assigned.
To assign names and tenants to extension user groups, click Extension Group Table. See 2.9.3 [3-
2] Extension Group for more details.
Main
Slot
Indicates the slot position of each extension card (reference only)....

2.10 [4] Extension
PC Programming Manual 253
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the por t is in use, the new extension number will not...

2.10 [4] Extension
254 PC Programming Manual
Feature Manual References
None
Por t Type
Indicates the extension port type (reference only).
Default
Current port type
Value Range
APT: APT port (PLC)
SLT: SLT port (SLC)
Hybrid: Hybrid port (HLC)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.5.7 Extension Port Configuration
Telephone Type
Indicates the type of telephone connected to the extension port (reference...

2.10 [4] Extension
PC Programming Manual 255
Extension Group
Specifies the extension user group to which the extension belongs. Extension user groups are used 
to compose tenants, call pickup groups and paging groups.
Default
1
Value Range
1–32
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.7.1 GROUP FEATURES
1.17.2 Tenant Service
COS
Specifies the COS of the extension.
Default
1
Value Range
1–64
Maintenance...

2.10 [4] Extension
256 PC Programming Manual
Value Range
Max. 10 digits (consisting of 0–9)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.5.6 Extension PIN (Personal Identification Number)
WARNING
There is a risk that fraudulent telephone calls will be made if a third party 
discovers a personal identification number (PIN) (verification code PIN or 
extension PIN) of the PBX.
The cost of such calls will be...

2.10 [4] Extension
PC Programming Manual 257
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS,...

2.10 [4] Extension
258 PC Programming Manual
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Intercept Destination—When called party does not answer—Day, Lunch, 
Break, Night
Specifies the Intercept Routing destination of calls in each time mode for Intercept Routing–No 
Answer and Intercept Routing–DND.
Note that Intercept Routing–Busy calls are routed using...

2.10 [4] Extension
PC Programming Manual 259
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.9.9 Intercept Routing
Intercept No Answer Time
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por...

2.10 [4] Extension
260 PC Programming Manual
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the port is in use, the new extension number will not...