Panasonic Kx Taw848 Programing Manual

2.10 [4] Extension
PC Programming Manual 281
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the por t number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual...

2.10 [4] Extension
282 PC Programming Manual
Default
Starting at 101
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent 
extensions by adding one to the previous extension number.)
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the...

2.10 [4] Extension
PC Programming Manual 283
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Flexible Button Programming Mode
Specifies whether the extension user can modify all flexible CO buttons without limitation, or only the 
One-touch Dialing buttons. When the mode is set to One-touch Dial, there is no need to enter 2 
before the number when customizing a One-touch Dialing button.
Default
No Limitation...

2.10 [4] Extension
284 PC Programming Manual
Feature Manual References
1.3.3 Call Log, Incoming
1.16.5 SVM (Simplified Voice Message)
Paging Deny
Specifies whether paging of the extension from other extensions is enabled.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.13.1 Paging
Option 7
Slot
Indicates the slot position of each extension card (reference only)....

2.10 [4] Extension
PC Programming Manual 285
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS,...

2.10 [4] Extension
286 PC Programming Manual
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Flash Mode during CO Conversation
Selects the function of the FLASH/RECALL button during a CO line conversation.
Default
Flash Recall
Value Range
EFA, Terminate, Flash Recall
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming...

2.10 [4] Extension
PC Programming Manual 287
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Option 8
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the...

2.10 [4] Extension
288 PC Programming Manual
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the port is in use, the new extension number will not...

2.10 [4] Extension
PC Programming Manual 289
Feature Manual References
None
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension 
at the moment that the extension goes on-hook for the previous call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Extension Caller ID
Enables the...

2.10 [4] Extension
290 PC Programming Manual
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time that the ringing for a call is delayed when the call follows immediately after 
the previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting 
in a queue is directed to an extension immediately after the previous unanswered call stops ringing), 
some SLTs require a pause, after the first call stops ringing, to receive the second calls Caller ID...