Panasonic Kx Taw848 PC Cprogramming Manual

2.10 [4] Extension
PC Programming Manual 311
Programmed Mailbox No.
Specifies the mailbox number of the PSs mailbox for Voice Processing Systems (VPS) with DTMF 
Integration.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
1.19.5 Voice Mail DTMF Integration
Transfer Recall Destination
Specifies the transfer recall destination when an...

2.10 [4] Extension
312 PC Programming Manual
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.7.12 [1-2] Portable Station
Feature Manual References
None
Extension Name
Specifies the name of the PS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
None...

2.10 [4] Extension
PC Programming Manual 313
Feature Manual References
1.5.6 Extension PIN (Personal Identification Number)
WARNING
There is a risk that fraudulent telephone calls will be made if a third party 
discovers a personal identification number (PIN) (verification code PIN or 
extension PIN) of the PBX.
 
The cost of such calls will be billed to the owner/renter of the PBX. 
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)Keeping PINs secret.
b)Selecting complex,...

2.10 [4] Extension
314 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
C. Waiting for Call from CO
Specifies whether to receive call waiting notification for a call from CO line, a doorphone call or a call 
via an incoming call distribution group.
Default
On
Value Range
Off, On
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
Pickup...

2.10 [4] Extension
PC Programming Manual 315
Pickup Dial Number
Specifies the number to be dialed automatically after going off-hook when the Hot Line feature is 
active.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
1.8.6 Hot Line
Option 3
Extension Number
Indicates the extension...

2.10 [4] Extension
316 PC Programming Manual
Value Range
Max. 20 characters
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
None
Call Pickup Deny
Specifies whether calls can be picked up by other extensions.
Default
Disable
Value Range
Disable: Allows other extension users to pick up calls to your PS 
Enable: Prevents other extension users from picking up calls to your PS
Maintenance Console Location
2.10.8...

2.10 [4] Extension
PC Programming Manual 317
Feature Manual References
1.5.3 Executive Busy Override
Absent Message
Specifies the Personal Absent Message which, unlike the System Absent Message, can be 
customized for each PS.
Default
Not stored.
Value Range
Max. 16 characters
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
1.1.1 Absent Message
Option 4
Extension Number
Indicates the extension number of the PS...

2.10 [4] Extension
318 PC Programming Manual
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
None
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Default
ICM
Value Range
No Line: No line is seized. 
Idle: An idle CO line is seized automatically from the programmed trunk groups. 
ICM: An extension line is seized....

2.10 [4] Extension
PC Programming Manual 319
F-1–F-12: The call arriving at a flexible CO button (F-1–F-12) is selected. A flexible CO button 
customized as a Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.10 [4-2-3] Portable Station—Flexible Button
Feature Manual References
1.10.2 Line Preference—Incoming
Call Waiting Tone Type
Selects the type of Call Waiting tone sent...

2.10 [4] Extension
320 PC Programming Manual
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Display Language
Selects the display language of the PS.
Default
Language 1
Value Range
Language1–Language5
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.7 Display Information
Option 5
Extension Number
Indicates the extension number of the PS (reference only).
Default
Not stored.
Value Range...