Panasonic Kx Taw848 PC Cprogramming Manual

2.11 [5] Optional Device
PC Programming Manual 361
Name
Specifies the doorphone name.
Default
Door
Value Range
Max. 20 characters
Maintenance Console Location
2.11.1 [5-1] Doorphone
Programming Manual References
None
Feature Manual References
1.4.10 Doorphone Call
Destination—Day, Lunch, Break, Night
Specifies the destination number of doorphone calls for each por t in each time mode.
Default
Day, Night: 602 
Lunch, Break: Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and...

2.11 [5] Optional Device
362 PC Programming Manual
Value Range
1–8
Maintenance Console Location
2.11.1 [5-1] Doorphone
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.4.10 Doorphone Call
1.17.2 Tenant Service
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone ports 
that are able to make CO line calls, and sets restrictions on intercom calls from certain extensions 
(Internal Call Block).
Default
1
Value Range
1–64
Maintenance...

2.11 [5] Optional Device
PC Programming Manual 363
Maintenance Console Location
2.11.1 [5-1] Doorphone
Programming Manual References
None
Feature Manual References
1.4.10 Doorphone Call
1.19.4 Voice Mail DPT (Digital) Integration
2.11.2 [5-2] External Pager
Settings for external pagers (external speakers) can be specified. 
Click Extension List View to view a list of all programmed extension numbers and types (see 2.4.2 
Tool—Extension List View).
Page Number 1—Floating Extension Number
Specifies the...

2.11 [5] Optional Device
364 PC Programming Manual
Maintenance Console Location
2.11.2 [5-2] External Pager
Programming Manual References
None
Feature Manual References
1.2.1 BGM (Background Music)
1.13.1 Paging
1.17.1 TAFAS (Trunk Answer From Any Station)
2.11.3 [5-3-1] Voice Message—DISA System
Direct Inward System Access (DISA) enables outside callers to access specific PBX features as if the 
caller were using an SLT extension of the PBX. 
For more information on DISA, see 1.4.6 DISA (Direct Inward...

2.11 [5] Optional Device
PC Programming Manual 365
DISA Intercept—Intercept when Destination through DISA is Busy
Selects how DISA calls are handled if the destination is busy, and disables Call Waiting, FWD, or Idle 
Extension Hunting.
Default
Busy Tone
Value Range
Busy Tone, Enable, Busy Message
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
DISA Intercept—Intercept when Destination through DISA sets DND
Selects...

2.11 [5] Optional Device
366 PC Programming Manual
Value Range
Disable (Release DISA): The DISA port of the message card is released when a CO-to-CO line call 
using DISA is established.
 
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF *
Enables a CO line caller to...

2.11 [5] Optional Device
PC Programming Manual 367
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is 
fixed to 4 times in the ranges of:
, = 100–1300 ms,  = 90 ms,  = 90 ms
Option: The tone pattern that the PBX receives is optional as specified in DISA Cyclic Tone Option 
on this screen.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
DISA Cyclic Tone...

2.11 [5] Optional Device
368 PC Programming Manual
DISA Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone 
company before recognising it as a tone-off. When no tone is detected within the time set here, the 
PBX recognizes it as a tone-off.
To change DISA Cyclic Tone Option, follow the steps below:
1.Change DISA Cyclic Tone Option.
2.Set the status of the MSG2 card to OUS, then INS.
Default
600 ms
Value Range
100 + 10 ×...

2.11 [5] Optional Device
PC Programming Manual 369
Default
None
Value Range
None, 1–32
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.17.3 Timed Reminder
2.11.4 [5-3-2] Voice Message—DISA Message
Outgoing messages (OGM) for DISA calls can be specified. A maximum of 32 OGMs can be 
programmed.
 
To view a list of all programmed extension numbers and types, click Extension List View...

2.11 [5] Optional Device
370 PC Programming Manual
Default
DISA 01–DISA 32
Value Range
Max. 20 characters
Maintenance Console Location
2.11.4 [5-3-2] Voice Message—DISA Message
Programming Manual References
None
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
1.12.1 OGM (Outgoing Message)
1 Digit AA Destination (Extension Number)—Dial 0–9
Specifies the destination for each DISA Automated Attendant (AA) number. After listening to an OGM, 
the caller can be directed to the destination by...