Panasonic Kx Taw848 PC Cprogramming Manual

2.10 [4] Extension
PC Programming Manual 271
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Incoming Call Display
Selects...

2.10 [4] Extension
272 PC Programming Manual
Automatic LCD Switch when Start Talking
Enables the first line of the display to show the call duration automatically after answering a CO line 
call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.4.7 Display Information
Key Pad Tone
Specifies whether key pad tones are heard when dialing.
Default
On
Value Range
Off, On...

2.10 [4] Extension
PC Programming Manual 273
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.8.1 Hands-free Answerback
Forced Automatic Answer
Specifies whether the extension automatically answers all incoming calls (both intercom and CO line 
calls) without going off-hook, regardless of the Hands-free Answerback setting.
Default
Off
Value Range
Off, On
Maintenance Console Location...

2.10 [4] Extension
274 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Option 6
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance...

2.10 [4] Extension
PC Programming Manual 275
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the por t is in use, the new extension number will not come into effect.
Note that...

2.10 [4] Extension
276 PC Programming Manual
Display Lock / SVM Lock
Locks or unlocks the Incoming Call Log and Simplified Voice Message Log display (i.e., specifies 
whether other extension users can see the Incoming Call Log and SVM Log information at the 
extension).
Default
Unlock
Value Range
Unlock, Lock
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.10.7 [4-1-6] Wired Extension—Simplified Voice Message
Feature Manual References
1.3.3...

2.10 [4] Extension
PC Programming Manual 277
Value Range
EFA, Terminate, Flash Recall
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.5.1 EFA (External Feature Access)
1.6.2 Flash/Recall/Terminate
Incoming Call Log Memory
Specifies the number of incoming CO line calls that are retained in the extensions Incoming Call Log 
memory.
Default
10
Value Range
0–100
Maintenance Console Location
2.10.1 [4-1-1] Wired...

2.10 [4] Extension
278 PC Programming Manual
Programming Manual References
None
Feature Manual References
None
Option 7
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Por t
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance...

2.10 [4] Extension
PC Programming Manual 279
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the por t is in use, the new extension number will not come into effect.
Note that...

2.10 [4] Extension
280 PC Programming Manual
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT. 
Note that the setting of this parameter is only effective when a resource for sending extension Caller 
ID is assigned in 
Extension Caller ID Resource-1, 2 for the port in 2.8.18 [2-10] Extension CID 
Settings.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18...