Panasonic Kx Taw848 PC Cprogramming Manual

2.9 [3] Group
PC Programming Manual 241
Default
1.5 s
Value Range
0.5 s, 1.0 s, 1.5 s, 2.0 s
Maintenance Console Location
2.9.17 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Timing—Waiting Time before Sending VM DTMF Status Signal
Specifies the length of time that the PBX waits before sending the DTMF status signal to the VPS 
after the VPS has finished dialing.
Default
1.5 s
Value Range
0.5 s, 1.0 s, 1.5 s, 2.0 s
Maintenance Console Location...

2.9 [3] Group
242 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.9.5 ICD Group Features—Queuing
Others—FWD to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to the 
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also 
possible to send no DTMF signal to the VPS.
Default
Answer by Mailbox
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.17...

2.9 [3] Group
PC Programming Manual 243
Others—Mailbox for Extension
Specifies whether the mailboxes use the same numbers as the extensions and incoming call 
distribution groups, or use different numbers as programmed for each extension or incoming call 
distribution group.
Default
Extension Number
Value Range
Extension Number, Programmed Mailbox Number
Maintenance Console Location
2.9.17 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution...

2.9 [3] Group
244 PC Programming Manual
2.9.18 [3-8-2] VM(DTMF) Group—Group Settings
A VM (DTMF) group has a floating extension number, and can be assigned as the destination for 
redirected calls and incoming calls.
 
To assign members to the group, click Member List. To view a list of all programmed extension 
numbers and types, click Extension List View.
Floating Ext No.
Specifies the floating extension number of the VM (DTMF) group.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)...

2.9 [3] Group
PC Programming Manual 245
Ty p e
Specifies the initial service mode in which the VPS answers calls.
Default
AA
Value Range
AA, VM
Maintenance Console Location
2.9.18 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.5 Voice Mail DTMF Integration
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Select the group to program from the VM(DTMF) Group Number list. 
To assign members to the group, enter directly or click Extension Number...

2.9 [3] Group
246 PC Programming Manual
Extension Name
Indicates the name of the extension (reference only).
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Programming Manual References
2.7.4 [1-1] Slot—Extension Port—Extension Name
2.9.18 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.5 Voice Mail DTMF Integration
2.9.20 [3-9] PS Ring Group
A PS ring group is a group of PS extensions that...

2.9 [3] Group
PC Programming Manual 247
Group Name
Specifies the name of the PS ring group, which will be shown on the display of extensions that call 
the PS ring group when 
Incoming Trunk Call Information Display on this screen is set to Called 
Number.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.20 [3-9] PS Ring Group
Programming Manual References
None
Feature Manual References
1.13.14 PS Ring Group
Incoming Trunk Call Information Display
Specifies the...

2.9 [3] Group
248 PC Programming Manual
2.1.6 Extension Number Setting). To copy members to another group, click Member List Copy, 
select the group, and click OK.
Extension Number
Specifies the extension number of the PS assigned to the PS Ring Group.
Default
Not stored.
Value Range
Max. 4 digits
Maintenance Console Location
2.9.21 [3-9] PS Ring Group—Member List
Programming Manual References
2.9.20 [3-9] PS Ring Group
2.7.12 [1-2] Portable Station—Extension No.
Feature Manual References
1.13.14 PS Ring...

2.10 [4] Extension
PC Programming Manual 249
2.10 [4] Extension
2.10.1 [4-1-1] Wired Extension—Extension Settings
For each slot in which an extension card is installed, a certain number of extension ports are 
displayed. For each extension por t, various extension settings can be assigned.
 
To assign names and tenants to extension user groups, click Extension User Group Table. See 
2.9.3 [3-2] Extension User Group for more details.
Main
Slot
Indicates the slot position of each extension card (reference...

2.10 [4] Extension
250 PC Programming Manual
Feature Manual References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the extension 
number is changed while the port is in use, the new extension number will not...