Panasonic Kx Ta824 Programming Manual

9.2 Extension [2]
Programming Manual 181
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Group No.
Selects the extension group to which the extension belongs.
Default
All jacks: Group No. 1
Value Range
1–8
Programming Manual References
[600]...

9.3 CO [3]
182 Programming Manual
Default
All Group Numbers: Off [Terminated (when checked)]
Value Range
set, type
set: On (checked), Off (unchecked)
type: Circular (Circulates until the call is answered), Terminated (Terminates at the last extension)
Programming Manual References
[100] Hunting Group Set
[101] Hunting Type
Feature Manual References
1.1.67 Idle Extension Hunting
9.3 CO [3]
9.3.1 Line Mode [3-1]
The distribution method of incoming outside (CO) line calls can be programmed for each outside...

9.3 CO [3]
Programming Manual 183
Value Range
Normal, DIL (Jack 01–24), DISA (OGM 1–8), Modem, BV (BV 01–24)
Programming Manual References
[414-416] CO Line Mode—Day/Night/Lunch
Feature Manual References
1.1.8 Built-in Voice Message (BV)
1.1.40 Direct In Line (DIL)
1.1.41 Direct Inward System Access (DISA)
1.1.99 PC Programming
9.3.2 Incoming / Outgoing [3-2]
The authorization to make or receive outside (CO) line calls can be programmed for each extension. The 
extension settings of an outside (CO) line...

9.3 CO [3]
184 Programming Manual
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Ringing for incoming CO calls—Day, Night, Lunch
Selects whether the extension will ring or not for incoming outside (CO) line calls in each time service mode. 
If the extension is set to ring, the ring delay...

9.3 CO [3]
Programming Manual 185
Programming Manual References
[405-407] Flexible Outward Dialing—Day/Night/Lunch
Feature Manual References
1.1.71 Line Access, Outside (CO) Line—SUMMARY
1.1.76 Line Preference—Outgoing
9.3.3 Detail [3-3]
Various settings can be programmed for each outside (CO) line.
CO
Indicates the outside (CO) line port number (reference only).
Value Range
1–8
Connection
Specifies which outside (CO) lines are connected to the PBX.
Note that the numbers of unconnected outside (CO) lines...

9.3 CO [3]
186 Programming Manual
Programming Manual References
[400] CO Line Connection
Feature Manual References
1.1.71 Line Access, Outside (CO) Line—SUMMARY
1.1.76 Line Preference—Outgoing
Dial Mode
Selects the type of signal used to dial out using an outside (CO) line.
Default
All outside (CO) lines: DTMF
Value Range
DTMF, Pulse, Call Blocking
Programming Manual References
[401] Dial Mode
Feature Manual References
1.1.39 Dial Type Selection
Pulse Speed
Selects the speed at which pulse signals are...

9.3 CO [3]
Programming Manual 187
Value Range
Max. 8 codes (1 or 2 digits consisting of 0–9,  , and #)
Programming Manual References
[403] Host PBX Access Code
Feature Manual References
1.1.65 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
CO Line Group
Selects the outside (CO) line group that each outside (CO) line is assigned to.
Default
CO 1–8 = CO Line Group 1–8 (e.g., CO 1: CO Line Group 1, CO 2: CO Line Group 2)
Value Range
1–8
Programming Manual References
[404] CO...

9.3 CO [3]
188 Programming Manual
Default
All outside (CO) lines: 600 ms
Value Range
80 ms, 100 ms, 160 ms, 300 ms, 600 ms, 900 ms, 1200 ms
Programming Manual References
[418] Flash/Recall Time
Feature Manual References
1.1.56 External Feature Access (EFA)
1.1.60 Flash/Recall
Automatic Line Access
Specifies which outside (CO) line is seized automatically when an extension user dials the Automatic Line 
Access number (9).
Default
All outside (CO) lines: On
Value Range
On (checked), Off (unchecked)...

9.3 CO [3]
Programming Manual 189
CPC Signal Detection—Outgoing
Enables the PBX to detect a CPC signal from outgoing outside (CO) line calls. If disabled, CPC signal 
detection is only activated during an incoming outside (CO) line call.
Default
All outside (CO) lines: Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[421] CPC Signal Detection—Outgoing
Feature Manual References
1.1.31 Calling Party Control (CPC) Signal Detection
Disconnect Time
Selects the length of the...

9.3 CO [3]
190 Programming Manual
9.7.2 Others [7-2]—Doorphone Ring Tone Pattern—Door 1–4
Feature Manual References
1.1.108 Ring Tone Pattern Selection
9.3.4 Local Carrier-based VM [3-4]
The PBX supports voice mail service, which is an answering system offered by the telephone company, that 
can notify the called party of a message waiting. The settings of an outside (CO) line can be copied to other 
outside (CO) lines. Select the outside (CO) line whose settings you want to copy to other outside (CO)...