Panasonic Kx Ta824 Programming Manual

9.1 System [1]
Programming Manual 141
9.1.10 Automatic Pause Insertion Codes [1-9]
A maximum of 40 Automatic Pause Insertion codes can be programmed. When a dialed telephone number 
matches one of the Automatic Pause Insertion codes specified here, a pause will be automatically inserted 
after the code. This is particularly convenient if a second dial tone is sent from your telephone company.
Automatic Pause Insertion Code
Specifies the Automatic Pause Insertion codes that are checked with the outgoing...

9.1 System [1]
142 Programming Manual
9.1.11 Detail [1-10]
Detailed information about the PBX can be programmed.
Extension—Ring Tone Pattern
Selects the extension ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Programming Manual References
[115] Extension Ring Tone Pattern
Feature Manual References
1.1.69 Intercom Call
1.1.108 Ring Tone Pattern Selection
2.2.1 Tones/Ring Tones
Extension—Ringback Tone Pattern
Selects the ringback tone pattern for outgoing...

9.1 System [1]
Programming Manual 143
Value Range
Single (3 s), Single (5 s), Double (3 s), Double (5 s)
Programming Manual References
[128] Ringback Tone Pattern
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.69 Intercom Call
2.2.1 Tones/Ring Tones
Extension—External Pager Access Tone
Enables the PBX to send a confirmation tone to the external pager before a paging announcement.
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[106] External...

9.1 System [1]
144 Programming Manual
Extension—Flash/Recall Mode for a Locked Extension
Enables a locked extension to send a flash/recall signal during a conversation with an outside party.
Default
Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[108] Flash/Recall Mode for a Locked Extension
Feature Manual References
1.1.55 Extension Lock
1.1.107 Remote Extension Lock
Proprietary Telephone—Flash/Recall Key Mode
Selects the function of the FLASH/RECALL button on a proprietary...

9.1 System [1]
Programming Manual 145
Programming Manual References
[109] CO Indicator
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
Proprietary Telephone—KX-T7700 Series Incoming Lamp Control
Enables the Message/Ringer Lamp on KX-T7700/KX-TA30800 series telephones for the following incoming 
calls:
– Incoming call from an outside (CO) line with Call Waiting Caller ID information
– Incoming call from another extension to a busy extension when the called extension has set...

9.1 System [1]
146 Programming Manual
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[105] Conference Tone
Feature Manual References
1.1.33 Conference
1.1.50 Executive Busy Override—Extension
1.1.51 Executive Busy Override—Outside (CO) Line
DSS—One-touch Transfer Using a DSS Button
Selects how an outside (CO) line call is transferred to an extension using a Direct Station Selection (DSS) 
button.
Default
With Transfer
Value Range
With Transfer, Without Transfer
With...

9.1 System [1]
Programming Manual 147
Programming Manual References
[112] DSS Lamp Mode
Feature Manual References
1.1.70 LED Indication
CO—Pulse dialing during a conversation
Enables the PBX to send pulse dialing to the telephone company during a conversation with an outside 
party when Pulse or Call Blocking is selected in Dial Mode on the 9.3.3 Detail [3-3] screen.
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[118] Pulse Restriction
9.3.3 Detail [3-3]—Dial Mode...

9.2 Extension [2]
148 Programming Manual
1–2: checking extension jacks 01–08
3–4: checking extension jacks 09–16
5–6: checking extension jacks 17–24
Installation Manual References
4.1.3 Operation
Programming Manual References
[107] DTMF Receiver Check
9.2 Extension [2]
9.2.1 Main [2-1]
Various parameters can be programmed for each extension. This screen is divided into 3 pages, each 
containing different settings. To show all parameters for a certain jack or extension, double-click the relevant 
Jack or...

9.2 Extension [2]
Programming Manual 149
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Account Code Mode
Selects the account code entry mode for each extension.
Default
All jacks: Option
Value Range
Option, Forced, Verify-All, Verify-Toll
Programming Manual References
[605] Account Code Mode
Feature Manual...

9.2 Extension [2]
150 Programming Manual
Default
All jacks: Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[607] Call Forwarding to CO Line
Feature Manual References
1.1.14 Call Forwarding (FWD)—To Outside (CO) Line
Busy Override
Enables the user to interrupt another extensions existing call to establish a 3-party conference call.
Default
All jacks: Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[608] Executive Busy Override
Feature Manual...