Panasonic Kx Ta824 Programming Manual

9.1 System [1]
Programming Manual 131
9.2.1 Main [2-1]—Account Code Mode
Feature Manual References
1.1.2 Account Code Entry
1.1.118 Toll Restriction (TRS) Override by Account Code
9.1.7 Timers [1-6]
Various system timers and counters can be programmed.
Recall Time—Call Hold
Selects the length of time a call on hold waits to be retrieved. If the call on hold is not retrieved within the 
time period programmed here, a ring tone will be heard at the extension that put the call on hold. If the 
extension is...

9.1 System [1]
132 Programming Manual
Default
30 s
Value Range
15 s, 30 s, 1 min, 2 min
Programming Manual References
[201] Transfer Recall Time
Feature Manual References
1.1.25 Call Transfer—To Extension
Start Time—Call Forwarding
Selects the length of time before a call is forwarded when the call is not answered.
Default
15 s
Value Range
5 s, 10 s, 15 s, 20 s
Programming Manual References
[202] Call Forwarding Start Time
Feature Manual References
1.1.12 Call Forwarding (FWD)—Busy/No Answer
Start...

9.1 System [1]
Programming Manual 133
Default
10 s
Value Range
Immediate, 5 x n (n=1–10) s
Immediate: The call timer starts immediately after an outside (CO) line is seized. 
5 x n (n=1–10) s: The call timer starts after the end of dialing.
Programming Manual References
[204] Call Duration Counter Start
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
Call Duration—CO-to-CO Duration Limit
Selects the maximum length of time allowed for a conversation...

9.1 System [1]
134 Programming Manual
CO Dialing—No Dial Disconnection
Selects whether or not to disconnect an outside (CO) line when an extension user does not dial anything 
within 10 seconds after seizing the outside (CO) line.
Default
Disable
Value Range
Disable (Do not disconnect), Enable (Disconnect)
Programming Manual References
[211] No Dial Disconnection
Feature Manual References
1.1.117 Toll Restriction (TRS)
CO Dialing—Inter-digit Time
Selects the length of time allowed between digits for an...

9.1 System [1]
Programming Manual 135
9.1.8 SMDR [1-7]
Station Message Detail Recording (SMDR) automatically records detailed information about incoming and 
outgoing calls.
RS-232C Parameters—NL Code
Selects the code appropriate for the PC or printer. If the PC or printer automatically feeds lines with carriage 
return, this selection must be set to CR. If not, CR+LF.
Default
CR+LF
Value Range
CR+LF, CR
CR: Carriage Return
LF: Line Feed
Programming Manual References
[800] SMDR RS-232C Parameter
Feature...

9.1 System [1]
136 Programming Manual
Programming Manual References
[800] SMDR RS-232C Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
RS-232C Parameters—Word Length
Selects how many bits compose each character.
Default
8 bits
Value Range
7 bits, 8 bits
Programming Manual References
[800] SMDR RS-232C Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
RS-232C Parameters—Parity Bit
Selects what type of parity is used to detect errors in...

9.1 System [1]
Programming Manual 137
Parity Bit: Space, Word Length: 8 bits, Stop Bit: 2 bits
If any of the above invalid combinations are selected, an error message will be displayed. 
Default
1 bit
Value Range
1 bit, 2 bits
Programming Manual References
[800] SMDR RS-232C Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
SMDR Format—Page Length
Selects the number of lines per page in order to match the paper size being used by the printer.
Notes
To enable the...

9.1 System [1]
138 Programming Manual
Programming Manual References
[801] SMDR Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
Selection for Printing—Outgoing Call
Selects whether the dialed digits of outgoing outside (CO) line calls are printed.
Default
On
Value Range
On (Print all calls), Off (No printing), Toll (Print toll calls only)
Programming Manual References
[802] Incoming/Outgoing Call Selection for Printing
Feature Manual References
1.1.112 Station Message...

9.1 System [1]
Programming Manual 139
Value Range
CODE, INDEX
Programming Manual References
[805] SMDR Account Code
9.1.6 Account Codes [1-5]—Account Code
9.2.1 Main [2-1]—Account Code Mode
Feature Manual References
1.1.2 Account Code Entry
1.1.112 Station Message Detail Recording (SMDR)
1.1.118 Toll Restriction (TRS) Override by Account Code
Selection for Printing—Secret Number
Selects whether secret dialing numbers stored in Line Access Number + Telephone Number on the 9.4.1 
System Speed Dialing [4-1]...

9.1 System [1]
140 Programming Manual
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
9.1.9 Carrier Exception Codes [1-8]
A maximum of 20 Carrier Exception codes can be programmed. The PBX can recognize a user-dialed 
carrier code in order to apply Toll Restriction (TRS). The PBX disregards the assigned code and TRS is 
applied to the numbers after the code.
Carrier Exception Code
Specifies the Carrier Exception codes.
Default
All codes: — (Not stored)
Value Range
Max. 10 digits...