Panasonic Kx Ta824 Programming Manual

9.9 Caller ID [9]
Programming Manual 221
Programming Manual References
[901] Caller ID Area Code
Feature Manual References
1.1.18 Call Log, Incoming
1.1.30 Caller ID
Caller ID Modification—Removed Digits
Selects the number of digits to be removed from the beginning of the incoming callers number.
Default
All local calls: 3 digits, Long distance calls: 0 digit
Value Range
0–9 digits
Programming Manual References
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long-distance...

9.9 Caller ID [9]
222 Programming Manual
Default
With CID
Value Range
Without CID (CID: Caller ID), With CID (CID: Caller ID)
Programming Manual References
[906] Caller ID SMDR Format
Feature Manual References
1.1.30 Caller ID
1.1.112 Station Message Detail Recording (SMDR)
Caller ID SMDR Printout
Enables the PBX to display a callers telephone number on SMDR before the call is answered.
Default
Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[907] Caller ID SMDR Printout...

9.9 Caller ID [9]
Programming Manual 223
Call Waiting Caller ID CAS Receive Time
This program is available when the Caller ID and Call Waiting Caller ID features are enabled in CO Line 
Settings—Caller ID and CO Line Settings—Call Waiting Caller ID respectively on this screen. 
If the extension user has a Call Waiting Caller ID during a conversation, the telephone company will send 
an alert tone (CAS) to the PBX. If the CAS duration is too long or too short, the CAS is ignored by the PBX. 
If the CAS is...

9.9 Caller ID [9]
224 Programming Manual
SLT Ring—Ring / Silence Ratio
Selects the ratio between the bell signals of an SLT (a set of bell-on and bell-off).
Default
1:3
Value Range
1:2, 1:3, 1:4
Programming Manual References
[142] SLT Ring/Silence Ratio
Feature Manual References
1.1.108 Ring Tone Pattern Selection
SLT Ring—Bell-on Time
Selects the length of the bell-on signal of an SLT. When combined with the ratio selected in the SLT Ring—
Ring / Silence Ratio list, this determines the ring tone pattern...

9.9 Caller ID [9]
Programming Manual 225
Feature Manual References
1.1.30 Caller ID
1.1.108 Ring Tone Pattern Selection
SLT Caller ID—Type
Selects the signaling type of SLT Caller ID.
Default
FSK (During Ring)
Value Range
FSK (During Ring), FSK (RP-AS), DTMF (Immediate), DTMF (During Ring)
Programming Manual References
[150] SLT Caller ID Signaling Type
Feature Manual References
1.1.30 Caller ID
SLT Caller ID—Line Access Number
Enables the PBX to automatically add an Outside (CO) Line Access number to...

9.9 Caller ID [9]
226 Programming Manual
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
SLT Caller ID
Enables the PBX to send Caller ID information to an SLT.
Default
All jacks: Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[628] SLT Caller ID
Feature Manual References
1.1.30 Caller ID
Ring Wait Time for New Call
Selects the length of time the...

9.9 Caller ID [9]
Programming Manual 227
Value Range
Disable, Single, Double
Programming Manual References
[629] SLT Fixed Bell Pattern
Feature Manual References
1.1.30 Caller ID
1.1.108 Ring Tone Pattern Selection
9.9.3 Call Log [9-3]
When a call containing Caller ID information is received by an extension, the information is shown on the 
telephone display and also automatically logged in the Incoming Call Log of the extension.
301st Call Log in Common Area
Selects whether the oldest call information...

9.9 Caller ID [9]
228 Programming Manual
Feature Manual References
1.1.18 Call Log, Incoming
Operating Manual References
2.1.8 The 301st Call Log, Incoming in the Common Area Treatment
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Caller ID...

9.9 Caller ID [9]
Programming Manual 229
Default
All jacks: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[909] Common Area Call Log Check
Feature Manual References
1.1.18 Call Log, Incoming
21st Call Log in Personal Area
Selects whether the oldest call information in the personal area will be replaced each time a call is received, 
or whether the new call information will be discarded when a call log is full (20 calls are stored) and a new 
call arrives.
Default
All jacks:...

9.9 Caller ID [9]
230 Programming Manual