Panasonic Kx Ta824 Programming Manual

9.7 Doorphone [7]
Programming Manual 211
Doorphone 1–4—Day, Night, Lunch
Enables doorphone call reception in each time service mode.
Default
All doorphones—all jacks: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[700-702] Doorphone Ringing—Day/Night/Lunch
Feature Manual References
1.1.48 Doorphone Call
Door Opener
The settings for unlocking the door can be programmed for each extension.
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates...

9.7 Doorphone [7]
212 Programming Manual
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Door Opener 1–4—Day, Night, Lunch
Enables door opening in each time service mode.
Default
All door openers—all jacks: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[703-705] Door Opener—Day/Night/Lunch
Feature Manual References
1.1.46 Door Open
9.7.2 Others...

9.7 Doorphone [7]
Programming Manual 213
Feature Manual References
1.1.48 Doorphone Call
1.1.108 Ring Tone Pattern Selection
Doorphone Access Tone—Door 1–4
Selects whether the PBX sends a doorphone access tone to a monitored doorphone before monitoring 
starts.
Default
All doors: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[707] Doorphone Access Tone
Feature Manual References
1.1.48 Doorphone Call
1.1.110 Room Monitor
Doorphone Ring Time—Door 1–4
Selects the length of time...

9.7 Doorphone [7]
214 Programming Manual
Programming Manual References
[709] Door Open Duration
Feature Manual References
1.1.46 Door Open
Doorphone Ring / Chime—Door 1–4
Selects whether doorphone calls ring at extensions or at dedicated door chimes.
Default
All doors: Ring
Value Range
Ring, Chime, Ring & Chime
Programming Manual References
[710] Doorphone Ring/Chime
Feature Manual References
1.1.47 Doorbell/Door Chime
1.1.48 Doorphone Call
Doorphone Chime Assignment—Door 1–4
Selects the relay to which a...

9.8 BV [8]
Programming Manual 215
Default
All doors: Pattern 1
Value Range
Pattern 1–8
Programming Manual References
[712] Doorphone Chime Pattern
Feature Manual References
1.1.47 Doorbell/Door Chime
1.1.48 Doorphone Call
2.2.1 Tones/Ring Tones
9.8 BV [8]
9.8.1 Main [8-1]
Built-in Voice Message (BV) allows a caller to leave a voice message in one of the voice message areas, 
and information on the recorded message is automatically logged in the Incoming Call Log of the extension, 
where it can be viewed...

9.8 BV [8]
216 Programming Manual
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
BV for Extension
Enables the BV feature for each extension.
Default
All jacks: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[622] BV for Extension
Feature Manual References
1.1.8...

9.8 BV [8]
Programming Manual 217
BV Access Code
Specifies a voice message access code used to play back and/or erase voice messages through outside 
(CO) lines. The voice message access code should be different from the corresponding extension number. 
If the voice message access code is the same as an extension number, dialing that number will access the 
extension, not the voice message area. A code that starts with a number already assigned as another code 
cannot be used. For example, if you assign...

9.8 BV [8]
218 Programming Manual
Programming Manual References
[807] BV Total Recording Time
Feature Manual References
1.1.8 Built-in Voice Message (BV)
Maximum recording time per message—Voice message
Selects the maximum recording time for each voice message.
Default
5 min
Value Range
1–20 min
Programming Manual References
[214] BV Recording Time
Feature Manual References
1.1.8 Built-in Voice Message (BV)
Maximum recording time per message—OGM
Selects the maximum recording time for each personal/common...

9.9 Caller ID [9]
Programming Manual 219
DISA IRNA to BV—Day, Night, Lunch
Selects the common BV OGM used as the intercept destination of unanswered Direct Inward System 
Access (DISA) calls in each time service mode.
Default
All outside (CO) lines: Not Stored
Value Range
Not Stored, BV 01–24
Programming Manual References
[438-440] DISA IRNA to BV—Day/Night/Lunch
Feature Manual References
1.1.8 Built-in Voice Message (BV)
9.9 Caller ID [9]
9.9.1 Main [9-1]
The settings of the Caller ID feature can be...

9.9 Caller ID [9]
220 Programming Manual
CO Line Settings—Caller ID
Enables the Caller ID feature for each outside (CO) line that has contracted the Caller ID Service from the 
telephone company. The Delayed Answer Time for the outside (CO) lines enabled here will always be 6 
seconds even if 0 s or 3 s is selected in Timers—DISA Delayed Answer Time on the 9.6.3 Settings [6-2] 
screen.
Default
All outside (CO) lines: On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[900] Caller...