Panasonic Kx Ta824 Programming Manual

9.6 DISA [6]
Programming Manual 201
Default
2 s
Value Range
1–5 s
Programming Manual References
[517] DISA AA Wait Time
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
AA table
This program is available only when With AA is selected in DISA Incoming Call Dial Mode on this screen. 
Specifies the destinations of the DISA AA numbers. To specify a destination for a DISA AA number, click 
Edit or double-click the AA number. To clear a setting, click it one time and click Clear. 
You can...

9.6 DISA [6]
202 Programming Manual
shows how to record and playback through personal programming from the telephone. After you click OK, 
a minus sign (-) is displayed before the AA icon, and the possible sub-destinations 0 [ ]–9 [ ] of the following 
level are displayed. When you click the minus sign (-), the sign changes back to the plus sign (+), and the 
list of sub-destinations is closed. In Interactive mode, when the selected DISA OGM has already been 
recorded, a horn graphic is displayed after...

9.6 DISA [6]
Programming Manual 203
Security—DISA Security Mode
Selects the DISA security mode to prevent unauthorized access to the PBX. In Trunk or All security mode, 
the caller is required to enter a DISA security code.
Default
Tr u n k
Value Range
None, Trunk, All
None: Intercom calls and outside (CO) line calls can be made.
Trunk: Intercom calls can be made. Outside (CO) line calls are restricted unless the DISA security code is 
entered.
All: All calls are restricted unless the DISA security code...

9.6 DISA [6]
204 Programming Manual
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Security—DISA Security Code Length
Selects the number of digits for the DISA security codes. When this setting is changed, DISA security codes 
that have already been assigned will be cleared.
Default
4 digits
Value Range
4–10 digits
Programming Manual References
[530] DISA Security Code Digits
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Security—DISA Tone after Security Code...

9.6 DISA [6]
Programming Manual 205
Programming Manual References
[506] DISA Busy Mode
9.2.11 Extension Group [2-6]—Extension Hunting—Extension Hunting
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.88 Outgoing Message (OGM) for DISA
Mode—DISA Intercept Mode
Selects how DISA calls are handled when the destination does not answer the call within a preprogrammed 
time period.
Default
Intercept
Value Range
Disconnect, Intercept
Programming Manual References
[507] DISA Intercept...

9.6 DISA [6]
206 Programming Manual
Timers—DISA Delayed Answer Time
Selects the length of time the caller hears a ringback tone before hearing a DISA OGM or a shor t beep.
Default
3 s
Value Range
0 s, 3 s, 6 s, 12 s
Programming Manual References
[504] DISA Delayed Answer Time
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Timers—DISA Wait Time after OGM
Selects the length of time the PBX keeps detecting DTMF signals or a fax (CNG) tone after completing a 
DISA OGM.
Default
5 s
Value...

9.6 DISA [6]
Programming Manual 207
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.68 Intercept Routing
Timers—DISA Ring Time after Intercept
Selects the length of time to ring the destination extension when a DISA call is redirected to the intercept 
destination after the time specified in Timers—DISA Ring Time before Intercept on this screen expires. 
When the destination extension does not answer the call within the preprogrammed time period, the call is 
disconnected....

9.6 DISA [6]
208 Programming Manual
Default
Disable
Value Range
Disable, Jack 01–24 (Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan 
[1-3] screen)
Programming Manual References
[503] FAX Connection
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
FA X  &  To n e — FA X  To n e  D e t e c t i o n
Selects the number of times the fax (CNG) tone must be detected while the DISA OGM is sent before the 
PBX...

9.6 DISA [6]
Programming Manual 209
FAX & Tone—DISA Ringback Tone
Selects whether to send a ringback tone or Music on Hold to the caller when a DISA call is received.
Default
Ringback Tone
Value Range
Ringback Tone, Music on Hold
Programming Manual References
[531] DISA Ringback Tone
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
9.6.4 Incoming Permission [6-3]
The settings to receive Direct Inward System Access (DISA) calls can be programmed for each extension.
Jack 01–24
Enables...

9.7 Doorphone [7]
210 Programming Manual
9.7 Doorphone [7]
9.7.1 Ringing & Door Opener [7-1]
Settings for receiving doorphone calls and accessing door openers can be programmed. A maximum of 4 
doorphones/door openers can be connected to the PBX.
Doorphone
The settings for receiving doorphone calls can be programmed for each extension.
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name...