Panasonic Kx-Ta624 Advanced Hybrid System User Manual

Telephone Features3-25
3.2 Telephone FeaturesC
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Caller ID Indication Button,
Caller ID Selection Button
• System Programming — Installation Manual
[900] Caller ID Assignment
[904] Caller ID Log Priority Selection
[906] Caller ID SMDR Format
Feature References
Call Log, Incoming 
Call Log Lock, Incoming
* The Caller ID service provides you with the caller’s information, such as the name and telephone number,
on the...

3-26Telephone Features
C3.2 Telephone Features
Call Log, Incoming
If you do not answer a call, your extension (KX-T7030 and KX-T7130 only)
automatically records the incoming outside call information from the Caller ID service*,
and the Caller ID Indication button indicator lights. Up to 20 calls can be logged per
extension. When the call log is full (20 calls are stored), you can select how the 21st call
is treated. Either a new call can be disregarded or the new call can overwrite the oldest
call that...

Telephone Features3-27
3.2 Telephone FeaturesC
Confirming and calling back
Display Operation (— for the KX-T7030 and KX-T7130)
When the Caller ID Indication button indicator is red, there are new
calls logged.
1.Confirm the number of logged calls.
2.Press the Caller ID Indicationbutton to see the incoming call
information.
• The new information that you have not confirmed will be
displayed first.
3.You can confirm another caller’s information by pressing the
Caller ID Indicationbutton again.
After...

3-28Telephone Features
C3.2 Telephone Features
Confirming the number of logged calls
PT
Press Caller ID Selection button while on-hook.
Condition
• When “Disregarding the 21st call” has been set and 20 calls are logged or all of the old
information has been overwritten, the Caller ID Selection button indicator lights and
informs you that no more calls can be logged.
Programming References
• System Programming — Installation Manual
[900] Caller ID Assignment
[901] Caller ID Area Code Assignment
[902]...

Telephone Features3-29
3.2 Telephone FeaturesC
Call Log Lock, Incoming
Allows you to lock the display of your extension so that the “Call Log, Incoming” feature
is not shown on the display when you press the Caller ID Indication button, if you do not
want others to see the information. This feature also works as Electronic Station Lockout.
Locking
PT
Lift the handset 
or press SP-PHONE.Dial 77. Hang up or press 
SP-PHONE.Enter the 4-digit lock code 
(0000 through 9999) twice.Dial #.
77lock codelock code...

3-30Telephone Features
C3.2 Telephone Features
Call Park
Allows you to place a held call into a system parking area so that you can perform other
tasks. The parked call can be retrieved by any extension user. Up to ten calls can be
parked.
PT and SLT
For a PT: Press HOLD.
For an SLT: Flash the hookswitch.Dial 22.
22
Confirmation tone 
and dial tone Confirmation tone 
and dial toneEnter a parking zone number 
(0 through 9).
parking zone no.
During a conversation
For an SLT
HOLDFor a PT

Parking zone...

Telephone Features3-31
3.2 Telephone FeaturesC
Conditions
• If a parked call is not retrieved within a pre-determined time (default: 30 seconds),
“Hold Alarm/Hold  Recall” occurs.
• If a parked call is not retrieved within thirty minutes, it will be automatically
disconnected.
• This feature is useful when you want to hold more than one intercom call with a PT, or
more than one intercom or outside call with an SLT.
Programming Reference
• System Programming — Installation Manual
[200] Hold Recall Time...

3-32Telephone Features
C3.2 Telephone Features
Conditions
• Doorphone calls can be picked up from extensions that are not programmed to answer
doorphone calls.
• You can hear a confirmation tone when the call is picked up. The tone can be disabled.
• If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone.
Programming Reference
• System Programming — Installation Manual
[117] Call Pickup Tone
Feature References
Call Pickup Deny
Doorphone Call
Call Pickup, Directed
Allows...

Telephone Features3-33
3.2 Telephone FeaturesC
Conditions
• You can pick up an incoming outside, intercom or doorphone call, but you cannot
pickup a Camp-On recall and hold recall.
• You can hear a confirmation tone when the call is picked up. The tone can be disabled.
• If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone.
Programming References
• System Programming — Installation Manual
[117] Call Pickup Tone
[600] Extension Group Assignment
Feature References
Call...

3-34Telephone Features
C3.2 Telephone Features
Feature References
Call Pickup, Directed
Call Pickup, Group
Call Pickup Deny
Allows you to prevent another extension from picking up your calls with the “Call
Pickup” feature.
Setting / Canceling
Any Telephone
To set: Dial 721#.
To cancel: Dial 720#.
721#To set.
720#To cancel.
Lift the handset or press 
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR. Confirmation tone 
and dial tone

• When setting:
• When canceling:
• Single line telephone users can...