Panasonic Kx-Ta624 Advanced Hybrid System User Manual

Station Programming (Personal Programming)2-13
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible CO 
button you wish to assign as 
the Log-In/Log-Out button.Dial 8.
8
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming mode.

Group Log In/Out
Log-In/Log-Out Button (Assignment)
Allows you to assign a Flexible CO button as the Log-In/Log-Out button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch...

2-14Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch
Dialing button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible button you wish to 
assign as a One-Touch Dialing button and dial 2, 
or press the desired PF button.Press STORE.
AUTO DIAL
STORE
Enter the desired number...

Station Programming (Personal Programming)2-15
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible 
CO button you wish to assign 
as the O-CO button.Press STORE.
AUTO DIAL
STORECO
Dial    .
• The STORE indicator lights.
• The display shows the initial programming
mode.
Other CO Key
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Other-CO (O-CO) Button (Assignment)
Allows you to assign a Flexible CO button as the Other-CO button.
— Be sure that you are in...

2-16Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
SAVE Button (Assignment)
Allows you to assign a Flexible CO button as the SAVE button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO 
button you wish to assign as 
the SAVE button.Dial 5.
5
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming mode.

Save Button
— To exit the Station...

Station Programming (Personal Programming)2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible 
CO button you wish to assign 
as an...

2-18Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Voice Mail (VM) Transfer Button (Assignment)†
Allows you to assign a Flexible CO button as the VM Transfer button. 
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You cannot enter a non-existent extension number.
• A voice mail extension number must be assigned by System Programming....

Station Programming (Personal Programming)2-19
2.2 Station Programming (Personal Programming)
Intercom Alert Assignment
Allows you to select the alert mode (tone/voice) when receiving an intercom (extension)
call.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial 4.
4
Press STORE.
AUTO DIAL
STORE
12or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
• The STORE indicator lights.
• The display shows the...

2-20Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Live Call Screening Mode Set†
Assign whether the recording message is monitores through the built-in speaker
(Hands-free mode) or an alert tone is sent (Private mode) while incoming callers are
leaving a message.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial #1.Press STORE.
AUTO DIAL
STORE
12or
Dial 1 or 2.
1 : to select Hands-free mode
2 : to select Private...

Station Programming (Personal Programming)2-21
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press STORE.
AUTO DIAL
STORE
Dial 3.
3
Enter the outside (CO) line numbers 
you want to ring (1 through 6).
outside (CO) line no.

RNG:1,2,3,4,5,6
— To exit the Station...

2-22Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming outside calls from the
following three line preferences.
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line Preference
Follow the corresponding programming procedure according to your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook. You must select...