Panasonic Kx-Ta624 Advanced Hybrid System User Manual

Telephone Features3-55
3.2 Telephone FeaturesD

101:   DND
Conditions
• If you hear a reorder tone after dialing 2, the “Do Not Disturb (DND) Override” feature
is not set at your extension.
• If you hear a busy tone after dialing 2, the line is busy. You can use the Automatic
Callback Busy (Camp-On) feature.
Programming Reference
• System Programming — Installation Manual
[609] Do Not Disturb Override
Feature References
Automatic Callback Busy (Camp-On)
Do Not Disturb (DND)
Do Not Disturb (DND) Override...

3-56Telephone Features
D3.2 Telephone Features
Door Opener
Allows you to unlock the door from your telephone.
Up to four door openers can be connected to the system.
To unlock the door from an assigned extension
Any Telephone
Enter a door opener number 
(1 through 4). Dial 55.
door opener no.55
Lift the handset or press 
SP-PHONE/MONITOR.Confirmation 
toneHang up or press 
SP-PHONE/MONITOR.
• The door is left unlocked for 5 seconds (default).

door opener number
D - Opener x-On
PT and SLT
Hang up or...

Telephone Features3-57
3.2 Telephone FeaturesD
Conditions
• An optional Doorphone/Door Opener card is necessary for this feature.
• If you dial 5 again while the door is open, the door will stay open for another five
seconds (default).
• You must program the extensions which can open the doors for the day, night and lunch
modes.
• You can modify the door opener timer through System Programming.
• The door opener will open the door, even if a doorphone is not installed.
Programming References
• System...

3-58Telephone Features
D3.2 Telephone Features
Doorphone Call
Allows you to have a conversation with a visitor at your doorphone.
Up to four doorphones can be connected to the system.
Calling an extension from a doorphone
Any Doorphone
Wait for an answer and talk.Press the Doorphone button for one second.
Any Telephone
Lift the handset or press SP-PHONE.
When you hear the doorphone ring tone at the extension
Answering a doorphone call
Calling a doorphone
Any Telephone
Enter a doorphone number 
(1 through...

Telephone Features3-59
3.2 Telephone FeaturesD
Conditions
• An optional Doorphone/Door Opener card and doorphones are necessary for this
feature.
• If you do not answer an incoming doorphone call within fifteen or thirty seconds, the
call will be canceled.
• You must program the extensions which can receive calls from each doorphone for the
day, night and lunch modes.
• Any extension user can call a doorphone.
• The Call Waiting feature is not available with doorphone calls.
• Doorphone 1 and Doorphone 2...

3-60Telephone Features
E3.2 Telephone Features
Any Telephone
#
Lift the handset or press 
SP-PHONE/MONITOR.Dial 77. Hang up or press 
SP-PHONE/MONITOR.Enter a 4-digit lock code 
(0000 through 9999) twice.Dial #.
77lock codelock code
same code
Confirmation tone 
and dial tone

Lock code
• Single line telephone users can dial “0” instead of “#”.
Locked : xxxx
Any Telephone
Lift the handset or press 
SP-PHONE/MONITOR.Dial 77. Hang up or press 
SP-PHONE/MONITOR.Enter the same lock code 
you used to lock the...

Telephone Features3-61
3.2 Telephone FeaturesE
Conditions
• If another user tries to access an outside (CO) line and presses a dial key from a locked
extension, the user will hear a reorder tone and for PT users “Restricted” is shown on
the display.
However, calls can be made at a locked extension depending on system programming.
System programming determines which COS number applies to calls at the locked
extension.
• An extension assigned as an operator or manager can cancel this feature for all...

3-62Telephone Features
E3.2 Telephone Features
Conditions
• An emergency call is allowed even in the following cases,
— Account Code – Verify (All) mode
— Any toll restriction COS number
— Electronic Station Lockout
• If your system is connected to a host PBX, you must dial the host PBX line access
code after the line access code.
Programming References
• System Programming — Installation Manual
[309] Emergency Dial Number Set
[403] Host PBX Access Codes
Feature References
Account Code Entry
Electronic...

Telephone Features3-63
3.2 Telephone FeaturesE
Conditions
• This feature does not work when “Data Line Security” or “Executive Busy Override
Deny” is set at either or both of the other parties.
• When a two-party call is changed to a three-party call or vice versa, a confirmation tone
is sent to all parties. The tone can be disabled.
Programming References
• System Programming — Installation Manual
[105] Conference Tone
[608] Executive Busy Override
Feature References
Conference
Data Line Security...

3-64Telephone Features
E3.2 Telephone Features
Conditions
• This feature does not work when “Data Line Security” or “Executive Busy Override
Deny” is set at the extension engaged in the existing outside call.
• When a two-party call is changed to a three-party call or vice versa, a confirmation tone
is sent to all parties. The tone can be disabled.
Programming References
• System Programming — Installation Manual
[105] Conference Tone
[608] Executive Busy Override
Feature References
Conference
Data Line...