Panasonic Kx Fpg391 Operating Instructions Manual

8. Programmable Features
79
“STANDARD” (default): Recording sound quality 
is standard, and the maximum recording time is 
approximately 15 minutes.
“ENHANCED”: Recording sound quality is 
clearer, and the maximum recording time is 
approximately 7 minutes.
Code #54: Changing the recording time for 
your TAM/FAX greeting message
GREETING TIME
MODE=16s [±]
“16s” (default): Maximum recording time is 16 
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 66 for details.
Code #59: Copying phone...

8. Programmable Features
80
Code #77: Changing the receiving mode in 
the AUTO ANSWER setting
AUTO ANSWER
MODE=TAM/FAX [±]
“TAM/FAX” (default): Telephone Answering 
Machine/Fax mode (page 58)
“FAX ONLY”: Fax only mode (page 59)
Code #80: Resetting advanced features to 
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1.Press {MENU}.
2.Press {#}, then {8}{0}.
3.Press {A} or {B} repeatedly to select “YES”.
4.Press {SET}.
5.Press {SET} again.
6.Press {MENU}.
8.4 Direct...

8. Programmable Features
81
{#}{0}{6} TAM ring count
–{2}: “2”
–{3}: “3” (default)
–{4}: “4”
–{5}: “5”
–{6}: “6”
–{7}: “7”
–{0}: “TOLL SAVER”
{#}{1}{0} Caller’s recording time
–{1}: “1 MIN”
–{2}: “2 MIN”
–{3}: “3 MIN” (default)
–{0}: “GREETING ONLY”
{#}{1}{1} Remote operation ID
LEnter a 2-digit number (00-99).
{#}{1}{3} Dialing mode
–{1}: “PULSE”
–{2}: “TONE” (default)
{#}{1}{6} Paper size
–{1}: “LETTER” (default)
–{2}: “A4”
{#}{1}{7} Ringer tone
–{1}: “TONE 1” (default)
–{2}: “TONE 2”
–{3}: “TONE 3”...

8. Programmable Features
82
{#}{5}{4} Greeting time
–{1}: “16s” (default)
–{2}: “60s”
{#}{5}{9} Copy phone book
–{1}: “1 ITEM” (default)
–{2}: “ALL ITEMS”
{#}{6}{2} Line mode
–{1}: “A”
–{2}: “B” (default)
{#}{6}{7} Incoming message monitor
–{1}: “ON” (default)
–{2}: “OFF”
{#}{7}{2} Flash time
–{1}: “90ms”
–{2}: “100ms”
–{3}: “110ms”
–{4}: “250ms”
–{5}: “300ms”
–{6}: “400ms”
–{7}: “600ms”
–{8}: “700ms” (default)
{#}{7}{3} Incoming call tone
–{1}: “OFF”
–{2}: “2” (default)
–{3}: “ON”
{#}{7}{4} Room...

8. Programmable Features
83
8.5.2 Programmable functions
Setting ringer tone for outside calls
To set the handset ringer tone from one of 7 
patterns for outside calls. You can select “Tone 
1” (default), “Tone 2”, “Tone 3”, “Melody 
1”, “Melody 2”, “Melody 3” or “Melody 4”.
– Handset ringer tone
1.Press {MENU}.
2.Press the soft key ({SELECT}) at “Ringer 
setting”.
3.Scroll to “Ringer tone” by pressing {v} or 
{e}, then press the soft key ({SELECT}).
4.Press {v} or {e} repeatedly to select the 
desired...

8. Programmable Features
84
“2” (default): The incoming call tone will sound 2 
times.
“On”: The incoming call tone will be heard for as 
long as the line rings.
“Off”: Deactivates this feature.
– Handset incoming call tone
1.Press {MENU}.
2.Press the soft key ({SELECT}) at “Ringer 
setting”.
3.Scroll to “Incoming call.” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
4.Press {v} or {e} repeatedly to select the 
desired setting.
5.Press the soft key ({SAVE}).
6.Press {OFF}.
– Base unit...

8. Programmable Features
85
4.Scroll to “Recording time” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
5.Press {v} or {e} repeatedly to select the 
desired setting.
LYou can also select the recording time by 
pressing {1} (1 minute), {2} (2 minutes), 
{3} (3 minutes) or {0} (“Greeting 
only”).
6.Press the soft key ({SAVE}).
7.Press {OFF}.
Note:
LIf you select “Greeting only”, the unit will 
answer a call with the greeting message, and 
then hang up. The unit will not record any 
incoming...

8. Programmable Features
86
1.Press {MENU}.
2.Scroll to “Initial setting” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
3.Scroll to “Message alert” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
4.Press {v} or {e} to select the desired 
setting.
5.Press the soft key ({SAVE}).
6.Press {OFF}.
Note:
LThe Ringer/Message alert indicator will not 
flash for new messages while the handset is 
in use.
L The Ringer/Message alert indicator acts as a 
ringer indicator and as a message...

8. Programmable Features
87
You can select: “90ms” (milliseconds), 
“100ms”, “110ms”, “250ms”, “300ms”, 
“400ms”, “600ms” or “700ms” (default).
1.Press {MENU}.
2.Scroll to “Initial setting” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
3.Scroll to “Set tel line” by pressing {v} 
or {e}, then press the soft key ({SELECT}).
4.Scroll to “Set flash time” by pressing 
{v} or {e}, then press the soft key 
({SELECT}).
5.Press {v} or {e} repeatedly to select the 
desired setting.
6.Press the soft...

8. Programmable Features
88
8.6 Direct commands for 
handset programming 
features
You can also select the desired setting by directly 
entering the program code ({0} to {9}, {*} and 
{#}) and direct command.
For more details on the features, see page 83 to 
page 87.
1Press {MENU}.
2Press the code number ({0} to {9}, {*} and 
{#}).
3Press the desired direct command to display 
the desired setting.
LThis step may be slightly different 
depending on the feature.
4Press the soft key ({SAVE}).
8.6.1 Program...