Panasonic Dx2000 Users Guide

69
To erase the settings of One-Touch/ABBR Dialing number
 (see Note 1)
1
        
2
Select 1 for One-Touch Dialing number.
Select 2 for ABBR Dialing Number.
Ex:
3
Enter the station you wish to change.
Ex:
or
4
or
5
To return to standby, press  .
1. If the One-Touch/Abbreviated dialing number has been used for a communication reservation, the settings cannot
be changed or erased until the communication has finished.
FUNCTION72SET1:ONE-TOUCH
2:ABBR NO.
1
ONE-TOUCH<  >
PRESS ONE-TOUCH
01
 SALES DEPT...

70
Printing Out a Directory Sheet
After programming a one-touch dialing number, you can print out the directory sheet which includes the first 12
characters of each station name.  Cut along the dotted line and place it over the One-Touch key under the
Directory Sheet Cover.  To print out a directory sheet, follow the steps below. (see Note 1)
1
  
2
  
Your machine prints out the directory sheet.
1. When a station name is not programmed for an email auto dialer, the email address is printed on the...

71
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters.  These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed.  If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be temporarily
changed by simple key operation just before a transmission is made.  When the transmission ends, however, these
parameters return to their preset...

72
Fax Parameter Table
No. ParameterSetting
NumberSetting Comments
001 CONTRAST *1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
002 RESOLUTION 1 Standard Setting the home position of the RESOLUTION key.
*2 Fine
3 400 dpi
004 STAMP *1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in memory, 
see Fax Parameter No. 028. 2On
005 MEMORY 1 Off Setting the home position of the MEMORY key.
*2 On
006 DIALING METHOD 1 Pulse...

73
022 SUBSTITUTE RCV
1 InvalidSelecting whether the machine receives to memory when 
recording paper runs out, toner runs out or recording paper is 
jammed.
*2 Valid
024 PRINT REDUCTION
1 FixedSelecting print reduction mode.
Fixed: Reduce received document according to setting of 
Parameter No. 025.
Auto: Reduce received document according to the length of 
received documents. *2 Auto
025 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This 
parameter functions only when...

74
038 ACCESS CODE
(----)Enter a 4-digit Access Code to secure the machine from 
unauthorized use.  (See page 146)
All: Restricts access to all operations of the machine.
Parameters: Restricts access to User Parameters (F-7-1), Fax 
Parameters (F-7-4) and Fax Parameter List  
Printing (F-6-4) only.
039 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a number 
with PIN Code.  (See page 149)
2Suffix
3 Prefix
052 DIAGNOSTIC
PA S S W O R D(----)Setting the password for Remote...

75
143 RELAY XMT REPORT
1 OffSetting how the COMM. Journal for relayed transmission is sent to 
the originator.
Off : Don’t send.
Always : Always send. 
Inc.only : Send only if communication has failed. *2 Always
3 Inc. only
144 EMAIL CHARACTER
SET1 Japanese Selecting the Character Set when receiving or sending email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email address 
before each transmission. (See page 125)
2 Valid
146 POP TIMER -- 0 to 60 min....

76
 (see Note 1)
 (see Note 2) (see Note 3)
156 PRINT FORWARDED
DOCUMENT*1 Inc. only Selecting whether a memory received fax or email to be forwarded 
is always printed or only when forwarding is incomplete.
2Always
157 TRANSACTION
JOURNAL*1 Invalid Selecting whether the machine sends a transaction journal to the 
pre-programmed email address.
2 Valid
158 PC REMOTE
UPDATE*1 InvalidSelecting whether the machine will accept commands from an
email application, to:  (See page 46 to 62)
(a)  Program the...

77
BASIC OPERATIONS
Loading Documents
Documents You Can Send
In general, your machine will send any document printed on A4, Letter or Legal size paper.
Documents You Cannot Send
You must never try to send documents that are:
To transmit these kinds of documents, make a photocopy first and then transmit the copy instead.
Wet Covered with wet ink
or paste
Too thin (e.g., onionskin, 
airmail paper, pages from 
some magazines, etc.)Wrinkled, curled or
folded
Coated (e.g., glossy
paper, etc.)Chemically...

78
Document Guides
CORRECTINCORRECT
How to Load Documents
6. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
7. Place the document(s) FACE DOWN
 on the Automatic Document Feeder (ADF) until the leading edge placed
into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first
. You can also stack up to 50
PA G E S
 on the ADF at one time.  If you have more than 50 pages, wait until transmission or...