Panasonic Dx2000 Users Guide

19
Internet Communication Features
Internet Fax Transmission
The DX-2000 allows you to transmit documents over the Internet to another Internet Fax or a PC.  The document
is first scanned and converted into a TIFF-F formatted image file, and then transmitted to the remote location as
an attachment file to an email using MIME encoding.
The email system at the receiving end must suppor t MIME.  Otherwise, the attachment file will be detached and
lost.
When you send an email message to someone, the DX-2000...

20
Inbound Routing
Using the Inbound Routing feature, the DX-2000 can route documents received from a G3 fax machine to email
address(s) or to Internet Fax machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s)
over the telephone line.
When an incoming Internet Fax, email or a regular fax document is received, the DX-2000, checks for the
following:
1. First, the DX-2000 checks whether a sub-address is included.  If it is, it will look for a sub-address match within
its auto...

21
Fax Forward
The DX-2000 is capable of transferring all received Internet email or regular G3 fax documents to a pre-
programmed G3 fax or a PC destination.
Network Scanner
The DX-2000 can be utilized as a network scanner by simply transmitting an image to a PC as TIFF-F attachment
to an email.
This feature was enhanced with an addition of a new Fax Parameter No. 164 (IFAX XMT HEADER), giving you a
selection of whether to include the header when sending a document to an addressee in the same Domain as...

22
Network Printer
The DX-2000 can be utilized as a network printer by simply sending the documents created on your PC using
various software applications to the DX-2000 via TCP/IP protocol.
There a two par ts to setting up the DX-2000 as a network printer.  Part 1 requires you to download the software
(printer driver and LPR) from the web site listed below.
The second par t requires you to install and configure the software on your PC to work with the DX-2000.  (See
the web site for details about the...

23
Relayed Transmission
The DX-2000 allows you to transmit an email received from an Internet Fax or PC connected to the LAN to
multiple fax machines via a telephone line.  You can attach files with the TIFF-F format to this email.
Using the Sub-address specified by the originating fax machine, the DX-2000 can then route the received
documents to the remote DX-2000 via an email, which can then relay these documents to final destinations
where the final recipient is a regular G3 fax machine.
The DX-2000...

24
Important Information
The DX-2000 uses the same communication protocols as email: the Simple Mail Transfer Protocol (SMTP).  The
differences from a standard G3 fax communication using the Public Telephone Network (PSTN) are as follows.
Differences between Internet Fax and Regular Fax
A regular Fax machine goes off-hook, dials, and the phone network completes a circuit over phone lines to the
receiving fax.  You pay for the circuit.  The two faxes negotiate a connection, synchronize and exchange image...

25
Sending Document Size via LAN
When transmitting via LAN, the transmitter is incapable of identifying the receiver’s recording paper size
capability, and thus it will not reduce the document size.  Therefore, when transmitting via LAN, it is
recommended that you use only A4/Letter size documents.  If a B4 size document is transmitted and the receiver
is only able to print A4 size, the communication will fail when the Fax Parameter No. 141 (LAN XMT
REDUCTION) is set to 1:Invalid.  (See page 74.)
Sending...

26
INSTALLING YOUR MACHINE
Main Unit and Accessories
Unpack the carton and check that you have all the illustrated accessories.
MachineToner CartridgeDocument Return Tray
Recording Paper TrayTelephone Line CablePower Cord
Users Guide / Quick GuidePaper Size LabelLithium Battery and Holder 

27
Installing the Accessories
Final Installed View
Handset Cradle [Available as an Option]
Hook the projections into the square holes
on the machine.
Connect the cable into the HANDSET jack
on the machine.
Handset
[Available as an Option]
Handset Cord
[Available as an Option]
Document Return and 
Recording Paper Trays
Hook the projections into the 
square holes on the machine.
2
ADF Door
Installing the Lithium Battery
(This battery is used to backup the clock during power failures,
see page 196.)
(1)...

28
Installing the Toner Cartridge
1Unpack the Toner Car tridge and rock it back 
and for th as shown for 5 or 6 times to even the 
toner inside.
2Remove the protective seal.
Note
: Pull on the seal slowly and straight out.
3Push the Release Button to open the Printer 
Cover.
Toner Cartridge
Printer Cover
Release Button