Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 131
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied...

Chapter 4 Settings — [SECURITY] menu
132 - ENGLISH
2) Press the  button.
 fThe  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)  
Press the  button.
5)

 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT  SELECT BUTTON] is selected, press the  button, and then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL]...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 133
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2)  
Press the  button.
 f The  [CONTROL DEVICE PASSWORD CHANGE]  screen is displayed.
3) Press asqw to select the text, and press the  button to enter the text.
4)  
Press 
 asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” by the factory default or when...

Chapter 4 Settings — [NETWORK] menu
134 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the  terminal of the projector.
1) Press  as to select [DIGITAL LINK MODE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 135
7) When the confirmation screen is displayed, press qw  to select [OK], and press the  button.
Note
 f The projector does not support 10BaseT  Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2)  
Press the  button.
 f The  [DIGITAL LINK SETUP] screen is displayed.
3) Press  as to select [DUPLEX(DIGITAL LINK)].
4)  
Press 
 qw to switch the communication method.
 fThe items will...

Chapter 4 Settings — [NETWORK] menu
136 - ENGLISH
4) Press as to select [STORE], and press the  button.
5)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f When using a DHCP  server, confirm that the DHCP server is running. fConsult your network administrator regarding the IP
 address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1) Press as to select [NETWORK CONTROL].
2)  
Press the  button.
 f The...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 137
3) Press as to select an item.
[Art-Net] Sets to [ON] when the Art-Net function is used. Sets to [OFF] when the Art-Net function is not used.
[PORT ADDRESS] Inputs a port address that the projector processes Art-Net.
[START ADDRESS] Inputs a start address that the projector processes Art-Net.
4) Press qw to switch the setting.
5)  
Press 
 as to select [STORE], and press the  button.
6)
 
When the confirmation screen is displayed, press  qw

 to select...

Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
 rExample of network connections via a twisted-pair-cable transmitter
Computer
Projector
LAN cable (straight) LAN cable (straight)
LAN cable (straight)
Twisted-pair-cable transmitter
Hub
 f
For the LAN cable between a twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 gCompatible with CA

T5e or higher
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 139
4) Click OK.
 fThe [Projector status] page is displayed.
Note
 fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   136). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   152)
 fThe administrator rights allow use of all functions. 

The user rights allow...

Chapter 4 Settings — [NETWORK] menu
140 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
7
8
1
2
3
4
16 9
5 10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5

 
[LAMP
  SELECT]
Displays the setting status of...