Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 6 Appendix — Technical information
ENGLISH - 171
When web control administrator rights password is not set (Non-protect \
mode)
Connecting
1)  
Obtain the IP
  address and port number (Initial set value = 1024) of the projector a\
nd request for a 
connection to the projector.
 f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Obtain from the main menu → [NETWORK] → [NETWORK STATUS]
Port number Obtain from the main menu → [NETWORK] →...

Chapter 6 Appendix — Technical information
172 - ENGLISH
Connection
Projector connecting terminalsComputer
D-Sub 9p (female) D-Sub 9p (male)
D-Sub 9p (male)
Communication cable (straight)
Single projector
Multiple projectors
Connecting terminals on projector 2
D-Sub 9p (female) D-Sub 9p (male) D-Sub 9p (female) D-Sub 9p (male)
Connecting terminals on projector 1
Computer
D-Sub 9p (male) D-Sub 9p (female) D-Sub 9p (male)
Communication cable
Communication cable
DIGITAL LINK compatible device Computer
D-Sub...

Chapter 6 Appendix — Technical information
ENGLISH - 173
D-Sub 9-pin (male)Outside view Pin No.
Signal name Details
(6) (9)
(1) (5)
(1)
―NC
(2) RXDReceived data
(3) TXDTransmitted data
(4) ―NC
(5) GNDEarth
(6) ―NC
(7) RTS
Connected internally
(8) CTS
(9) ―NC
Communication conditions (Factory default)
Signal level RS - 232C-compliant
Sync. method Asynchronous
Baud rate 9
  600   bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None
Basic format
Transmission from the...

Chapter 6 Appendix — Technical information
174 - ENGLISH
Attention
 fIf a command is transmitted after the lamp starts illuminating, there may be a delay in response or the command may not be executed.  T ry 
sending or receiving any command after 60 seconds.
 f When transmitting multiple commands, be sure to wait until 0.5 seconds has elapsed after receiving the response from the projector before 
sending the next command. When transmitting a command which does not need a parameter , a colon (:) is not...

Chapter 6 Appendix — Technical information
ENGLISH - 175
Control command
The following table lists the commands that can be used to control the projector using a computer.
 rProjector control command
Command Details Parameter/response 
string Remark (parameter)
PON Power on ―To check if the power is on, use the “Power query” command.
POF Power standby
QPW Power query 000
001 STANDBY
Power on
IIS Switching the input 
signal VID
VIDEO
RG1 RGB1
RG2 RGB2
DVI DVI
- D
HD1 HDMI
DL1 DIGITAL LINK
SD1 SDI (only...

Chapter 6 Appendix — Technical information
176 - ENGLISH
 rLens control command
Command Sub command Details Remark
VXX LNSI2 Lens H shift
+00000 = Fine adjustment 1+, +00001 = Fine adjustment 1
-, +00100 
= Fine adjustment 2+, +00101 = Fine adjustment 2-, +00200 = Coarse 
adjustment+, +00201 = Coarse adjustment-
VXX LNSI3 Lens V shift
VXX LNSI4 Lens focus
VXX LNSI5 Lens zoom
 terminal
It is possible to control the projector remotely (by external contact) from a control panel located away from the...

Chapter 6 Appendix — Technical information
ENGLISH - 177
Two-window display combination list
Sub window
RGB1 RGB2
VIDEO 
input
Main window RGB Movie
*1Y/C input RGB Movie*1
RGB1RGB
―――
lll
Movie*1― ――
la a
Y/C input ―――
la ―
RGB2 RGB
lll―
―
l
Movie
*1l a a ―
―
a
VIDEO input la ―
la ―
DVI
-
D RGB
*2l
lllll
Movie
*3l a a la a
HDMI RGB
*2l
lllll
Movie
*3l a a la a
SDI la a la a
DIGITAL LINK RGB
*2―
―――――
Movie
*3― ―――――
Sub window
DVI
-
D HDMI
SDIDIGITAL LINK
Main window RGB...

Chapter 6 Appendix — Technical information
178 - ENGLISH
Upgrade Kit
(Only for PT-DZ870U)
If the optional Upgrade Kit (Model No.: ET
-
 UK20) is applied, the following functions are extended.
FunctionStandard status When the Upgrade Kit is applied
Adjustment range of 
[VERTICAL KEYSTONE] Maximum of ±40°
*1Maximum of ±45°*1
Adjustment range of 
[HORIZONTAL KEYSTONE] Maximum of ±15°*1Maximum of ±40°*1
Adjustment range of 
[CURVED] Vertical arc, Maximum ±50°*1
Horizontal arc, Maximum ±50°*1Vertical arc,...

Chapter 6 Appendix — Technical information
ENGLISH - 179
ModeResolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
SVGA 800   x   600 35.2 56.3 36.0
R/D/H
l―
l l l
800   x   600 37.9 60.3 40.0
R/D/H
l―
l l l
800   x   600 48.1 72.2 50.0 R/D/H
l―
l l l
800
  x   600 46.9 75.0 49.5 R/D/H
l―
l l l
800
  x   600 53.7 85.1 56.3 R/D/H ― ― ― ― ―
MAC16 832
  x   624 49.7 74.6 57.3 R/D/H
l―
l l l
XGA 1
  024   x   768 39.6...

Chapter 6 Appendix — Technical information
180 - ENGLISH
ModeResolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
1920 x 1080 1   920   x   1   080 55.6 49.9 141.5
R/D/H ― ― ― ― ―
1   920   x   1   080*566.6 59.9 138.5 R/D/H ― ― ― ― ―
1
 
920
 
x
 
1
 
080
*767.2 60.0 173.0 R― ― ― ― ―
WUXGA 1
 
920
 
x
 
1
 
200 61.8 49.9 158.3 R/D/H ― ― ― ― ―
1
 
920
 
x
 
1
 
200
*574.0 60.0 154.0 R/D/H
l―
l l*8l*8
1 920 x 1...