Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 91
5) Press qw to switch the item.
[3D SYNC MODE] Items set in [3D SYNC1] Items set in [3D SYNC2]
[OFF] Not used. Not used.
[1] 3D trigger output Stereo synch output
[2] 3D trigger output 3D trigger output
[3] Stereo synch input Through 3D SYNC1
[4] Stereo synch input Stereo synch output
[5] Stereo synch input 3D trigger output
[6] Frame synch input Through 3D SYNC1
[7] Frame synch input Stereo synch output
[8] Frame synch input 3D trigger output
[9] 3D...

Chapter 4 Settings — [3D SETTINGS] menu
92 - ENGLISH
[NATIVE]Forcibly displays 2D images regardless of input image signals.
[SIMULTANEOUS]
*2Forcibly displays 3D images in simultaneous system regardless of input video signals.
[SIDE BY SIDE] Forcibly displays 3D images in side by side format regardless of input image signals.
[TOP AND BOTTOM] Forcibly displays 3D images in top and bottom format regardless of input image signals.
[LINE BY LINE]
*3Forcibly displays 3D images in line by line system...

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 93
Note
 fThis is disabled when [3D SYSTEM SETTING] is set to other than [SINGLE].
[SUB CLOCK PHASE]
You can adjust the image when the image flickers or outline blurs.
1) Press  as to select [SUB CLOCK PHASE].
2)  
Press 
 qw or the  button.
 fThe  [SUB CLOCK PHASE] individual adjustment screen is displayed.
3) Press  qw to adjust.
 fAdjustment value will change between [0] and [+31].  Adjust so that the amount of interference is at a minimum.
Note...

Chapter 4 Settings — [3D SETTINGS] menu
94 - ENGLISH
 fDisplays the 3D test pattern in 60   Hz vertical scanning frequency when no signal is input. When a signal is input, the 3D test pattern is 
displayed in the vertical scanning frequency that is same as the input signal.
[SAFETY PRECAUTIONS MESSAGE]
Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on.
1) Press  as to select [SAFETY PRECAUTIONS MESSAGE].
2)  
Press 
 qw to switch the item.
 fThe...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 95
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from 
the sub-menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press  as to select [COLOR...

Chapter 4 Settings — [DISPLAY OPTION] menu
96 - ENGLISH
1) Press as to select [COLOR MATCHING].
2)  
Press 
 qw to select [MEASURED].
3)
 
Press the  button.
 f The  [MEASURED MODE] screen is displayed.
4) Press  as to select [MEASURED DATA].
5)  
Press the  button.
 f The  [MEASURED DATA] screen is displayed.
6) Measure the current luminance (Y) and the chromaticity coordinates (x\
, y) using the colorimeter .
7)  
Press 
 as to select a color, and press qw to adjust the setting.
 fSet [AUTO...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 97
Model No.[SCREEN FORMAT] Range when [SCREEN POSITION] is selected
PT
-
 DW830U [16:10]
Cannot be adjusted.
[16:9] Adjusts the vertical position between 
-40 and 40.
PT
-

DX100U [4:3]
Cannot be adjusted.
[16:9] Adjusts the vertical position between 
-96 and 96.
4) Press as to select [SCREEN POSITION].
 fIf [SCREEN FORMA T] is set to [16:10] in PT- DZ870U and PT- DW830U, or [SCREEN FORMAT] is set to [4:3] in PT- DX100U, then 
selection and adjustment...

Chapter 4 Settings — [DISPLAY OPTION] menu
98 - ENGLISH
2) Press the  button.
 fThe  [AUTO SETUP] screen is displayed.
3) Press  as to select [POSITION ADJUST].
4)  
Press 
 qw to switch the item.
[OFF] Does not perform automatic adjustment.
[ON] Adjust the screen position and size when automatic setup is executed.
Adjusting signal level automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 f The  [AUTO SETUP] screen is displayed.
3) Press  as to select [SIGNAL LEVEL ADJUST].
4)...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 99
1) Press as to select [DVI-D IN].
2)  
Press the  button.
 f The  [DVI-D IN] screen is displayed.
3) Press  as to select [EDID].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[EDID3] Recognizes movie-based video signals and still image signals automatically .
[EDID1] Select mainly when an external device that outputs movie-based video signals (such as a blu-ray disc 
player) is connected to the...

Chapter 4 Settings — [DISPLAY OPTION] menu
100 - ENGLISH
[AUTO]Automatically sets the signal level.
[64 - 940] Select when the HDMI terminal output of an external device (such as a blu-ray disc player) is 
connected to the  terminal via a twisted-pair-cable transmitter.
[0
- 1023] Select this when the DVI
- D terminal output or HDMI terminal output of an external device (such as a 
computer) is connected to the  terminal via a twisted-pair-cable transmitter.
Note
 f The optimal setting varies depending...