Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 71
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press  as to select [PICTURE MODE].
2)  
Press 
 qw or the...

Chapter 4 Settings — [PICTURE] menu
72 - ENGLISH
2) Press qw or the  button.
 fThe  [BRIGHTNESS] individual adjustment screen is displayed.
3) Press  qw to adjust the level.
Operation AdjustmentRange of adjustment
Press the w button. Increases the brightness of the dark (black) parts of the screen.
-31 - +31
Press the q button. Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
You can adjust the color saturation of the projected image.
1) Press 
as to select [COLOR].
2)  
Press 
 qw...

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 73
Adjusting desired white balance
1) Press as to select [COLOR TEMPERATURE].
2)  
Press 
 qw or the  button.
 fThe  [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press  qw to select [USER1] or [USER2].
4)  
Press the  button.
 f The  [COLOR TEMPERATURE] screen is displayed.
5) Press  as to select [WHITE BALANCE].
6)  
Press the  button.
 f The  [WHITE BALANCE] screen is displayed.
7) Press  as to select [WHITE BALANCE HIGH] or [WHITE...

Chapter 4 Settings — [PICTURE] menu
74 - ENGLISH
Note
 fAdjust [COLOR  TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment 
does not look suitable, you can press the  button on the remote control to return the setting for the selected item only to the 
factory default setting.
 f When color temperature has been changed, the colors before and after the change will dif fer slightly

.
Changing the name of [USER1] or [USER2]
1) Press as to...

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 75
1) Press as to select [SYSTEM DAYLIGHT VIEW].
2)  
Press 
 qw or the  button.
 fThe  [SYSTEM DAYLIGHT VIEW]  individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] No correction.
[1] Corrects the image to weaken vividness.
[2] Corrects the image to medium vividness.
[3] Corrects the image to high vividness.
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)...

Chapter 4 Settings — [PICTURE] menu
76 - ENGLISH
[2]Moderately corrects aperture and signal.
[3] Strongly corrects aperture and signal.
[USER] Set any desired correction.
Refer to “Adjusting desired correction amount” (
x
  page   76) for details.
Adjusting desired correction amount
1) Press as to select [DYNAMIC IRIS].
2)  
Press 
 qw or the  button.
 fThe  [DYNAMIC IRIS] individual adjustment screen is displayed.
3) Press  qw to select [USER].
4)  
Press the  button.
 f The  [DYNAMIC IRIS] screen is...

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 77
TerminalSystem format
 terminal,  terminal 480i, 576i, 480p, or 576p 
signal Select [AUTO], [RGB], or [YC
BCR].
Other movie-based signals Select [AUTO], [RGB], or [YP
BPR].
 terminal (Only for  PT
-

DZ870U) Select [AUTO], [480i YC
BCR], [576i YCBCR], [720/50p YPBPR], [720/60p YPBPR], [1035/60i YPBPR], 
[1080/24p
 YPBPR], [1080/24sF YPBPR], [1080/25p YPBPR], [1080/30p YPBPR], [1080/50i YPBPR], 
[1080/60i
 YPBPR], [1080/50p YPBPR], [1080/60p YPBPR],...

Chapter 4 Settings — [POSITION] menu
78 - ENGLISH
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an \
item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
[SHIFT]
Move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relative position of the 
projector and the screen is installed...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 79
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT] Displays images without changing the aspect ratio of the input signals.
[VID AUTO]
*1The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC 
signals.
[AUTO]
*2The projector identifies the video ID (VID) embedded in...

Chapter 4 Settings — [POSITION] menu
80 - ENGLISH
Note
 fWhen [ASPECT] is set to [THROUGH], [ZOOM] cannot be adjusted.
When [ASPECT] is set to [DEFAULT]
1) Press  as to select [ZOOM].
2)  
Press the  button.
 f The  [ZOOM]  screen is displayed.
3) Press  as to select [MODE].
4)  
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select...