Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 61
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image 
temporarily.
 button
1) Press the  button.
 f The image disappears.
 fThis operation can be also performed using the  button on the control panel.
2) Press the  button again.
 fThe image is displayed.
Note
 fThe power indicator...

Chapter 3 Basic Operations — Operating with the remote control
62 - ENGLISH
Switching the input signal
The input for projection can be switched.
 button
1) Press the input selection (, , , , , ) buttons.
 fThis operation can be also performed using the buttons on the control panel.
 Switches the input to RGB1 or RGB2. Switches to another input when one input has already been 
chosen.
 Switches the input to DIGITAL LINK.
 Switches the input to DVI
- D.
 Switch the input to VIDEO.

*1Switches the input to...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 63
Using the automatic setup function
The automatic setup function can be used to automatically adjust the resolution, clock phase, and image position when analog RGB signals 
consisting of bitmap images such as computer signals are being input, or to automatically adjust the image position when DVI- D/HDMI signals 
are input.  Supplying images with bright white borders at the edges and high-contrast black and white characters is...

64 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using the on-screen menu.   

Chapter 4 Settings — Menu navigation
ENGLISH - 65
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or control panel.
 fThe  [MAIN MENU] screen is displayed.
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION 3D SETTINGS
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
P IN P
ENTER
2) Press  as...

Chapter 4 Settings — Menu navigation
66 - ENGLISH
4) Press as to select a sub-menu, and press qw or the  button to change or adjust settings.
 fSome items will switch in order as follows each time you press  qw .
ABC
 fFor some items, press  qw to display an individual adjustment screen with a bar scale as shown below .
0CONTRAST
ADJUST
Note
 fPressing the  button while the menu screen is displayed returns to the previous menu. fSome items may not be adjusted or used for certain signal formats to be...

Chapter 4 Settings — Menu navigation
ENGLISH - 67
Main menu itemPage
[PROJECTOR SETUP] 108
[P IN P]124
[TEST PATTERN]126
[SIGNAL LIST]127
[SECURITY]130
[NETWORK]134
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE] 
Sub-menu itemFactory defaultPage
[PICTURE MODE] [STANDARD]
*171
[CONTRAST] [0]71
[BRIGHTNESS] [0]71
[COLOR] [0]72
[TINT] [0]72
[COLOR TEMPERATURE] [DEFAULT]72
[WHITE GAIN] [+10]74
[GAMMA] [DEFAULT]74
[SYSTEM DAYLIGHT...

Chapter 4 Settings — Menu navigation
68 - ENGLISH
Sub-menu itemFactory defaultPage
[INPUT RESOLUTION] ―85
[CLAMP POSITION] [24]
*185
[EDGE BLENDING] [OFF]86
[FRAME RESPONSE] [NORMAL]87
[FRAME LOCK] [OFF]88
[RASTER POSITION] ―88
*1 Depends on the signal input.
Note
 fSub-menu items and factory default settings vary depending on the selected input terminal.
[DISPLAY LANGUAGE] 
Details (x page 89)
[3D SETTINGS] 
Sub-menu item Factory defaultPage
[3D SYSTEM SETTING] [SINGLE]90
[DLP Link] [ON]90
[3D SYNC...

Chapter 4 Settings — Menu navigation
ENGLISH - 69
Sub-menu itemFactory defaultPage
[CUT OFF] —106
*1 Only for PT-DZ870U
[PROJECTOR SETUP] 
Sub-menu item Factory defaultPage
[PROJECTOR ID] [ALL]108
[PROJECTION METHOD] [FRONT/FLOOR]108
[COOLING CONDITION] [AUTO]109
[HIGH ALTITUDE MODE] [OFF]109
[LAMP SELECT] [DUAL]109
[LAMP RELAY] [OFF]11 0
[LAMP POWER] [NORMAL]111
[BRIGHTNESS CONTROL] —111
[STANDBY MODE] [NORMAL]11 6
[SCHEDULE] [OFF]11 6
[STARTUP INPUT SELECT] [LAST USED]11 7
[RS-232C] ―11 8
[STATUS] ―11...

Chapter 4 Settings — Menu navigation
70 - ENGLISH
[NETWORK] 
Sub-menu itemFactory defaultPage
[DIGITAL LINK MODE] [AUTO]134
[DIGITAL LINK SETUP] ―134
[DIGITAL LINK STATUS] ―135
[NETWORK SETUP] ―135
[NETWORK CONTROL] ―136
[NETWORK STATUS] ―136
[DIGITAL INTERFACE BOX] ―136
[Art-Net SETUP] ―136
Note
 fSome items may not be adjusted or used for certain signal formats to be input to the projector .
The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.
 f...