Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 101
[ON-SCREEN DISPLAY]
Set the on-screen display.
Setting [OSD POSITION]
Set the position of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2)  
Press the  button.
 f The  [ON-SCREEN DISPLAY] screen is displayed.
3) Press  as to select [OSD POSITION].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[2] Sets to the center left of the screen.
[3] Sets to the bottom left of the screen.
[4]...

Chapter 4 Settings — [DISPLAY OPTION] menu
102 - ENGLISH
Note
 fEven if [OSD MEMOR Y] is set to [ON], the cursor position will not be held when the  switch of the projector body is turned 
.
Setting [INPUT GUIDE]
Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the 
[OSD POSITION].
1) Press  as to select [ON-SCREEN DISPLAY].
2)  
Press the  button.
 f The  [ON-SCREEN DISPLAY] screen is displayed.
3) Press  as to select...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 103
2) Press the  button.
 fThe  [CLOSED CAPTION SETTING]  screen is displayed.
3) Press as to select [MODE].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[CC1] Displays CC1 data.
[CC2] Displays CC2 data.
[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
 fClosed caption is a function that displays text information of video signals mainly used in North  America. Captions may not be displayed...

Chapter 4 Settings — [DISPLAY OPTION] menu
104 - ENGLISH
2) Press the  button.
 fThe  [UNIFORMITY] screen is displayed.
3) Press  as to select [VERTICAL] or [HORIZONTAL].
4)  
Press 
 qw to adjust the level.
Parameter OperationAdjustmentRange of adjustment
[VERTICAL] Press the w button.
The lower-side brightness 
decreases, or the upper-side 
brightness increases.
-127 - 127
Press the q button.
The upper-side brightness 
decreases, or the lower-side 
brightness increases.
[HORIZONTAL] Press the w...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 105
Note
 fPress the  button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.
Setting [STARTUP]
1) Press  as to select [SHUTTER SETTING].
2)  
Press the  button.
 f The  [SHUTTER SETTING]  screen is displayed.
3) Press as to select [STARTUP].
4)  
Press 
 qw to switch the item.
[OPEN] Projection begins with the shutter open when the power is turned on.
[CLOSE] Projection begins with the shutter close...

Chapter 4 Settings — [DISPLAY OPTION] menu
106 - ENGLISH
“Select line (blue)”Displayed in blue waveform.
Note
 fSetting is also available from [FUNCTION BUTT ON] (x   page   121). fW
aveform monitor cannot be displayed in [P IN P].
 fThe waveform monitor turns of

f when [P IN P] is executed during waveform monitoring.
 fThe waveform monitor is not displayed when on-screen display is hidden (of f).
Adjusting the waveform
Project the luminance adjustment signal of a commercial test disk (0 % (0 IRE or 7.5...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 107
Note
 fWhen input is switched or a signal is switched, the cutof f setting returns to its original setting (off).   

Chapter 4 Settings — [PROJECTOR SETUP] menu
108 - ENGLISH
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item 
from the sub-menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous 
control or individual control...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 109
[COOLING CONDITION]
Change the fan control depending on the direction of projection.
Set [COOLING CONDITION] according to the projection direction, but set it to [AUTO] normally. Using the projector with [COOLING 
CONDITION] set incorrectly may shorten the life of the lamp.

30°
30° 30°
30°
[VERTICAL UP SETTING]
[FLOOR SETTING] [CEILING SETTING]
[VERTICAL DOWN SETTING] Projection direction
1) Press as to select [COOLING CONDITION].
2)  
Press...

Chapter 4 Settings — [PROJECTOR SETUP] menu
110 - ENGLISH
Note
 fWhen [SINGLE], [LAMP1], or [LAMP2] is selected, if the lamp turns of f or if the runtime exceeds 3   000 hours*1 (when [LAMP POWER] is 
set to [NORMAL]), the other lamp turns on. When [DUAL] is selected, if either lamp turns of f or if the runtime exceeds 3
  000 hours*1 (when 
[LAMP POWER] is set to [NORMAL]), only the other lamp remains on. However, if both lamps turn off or when operation times of both 
lamps exceed 3
 
000 hours
*1...