Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions

DISPLAY OPTION menu
ENGLISH - 61
Settings
[SIDE BY SIDE MODE] options 
J
MODE 1:
Projects dual screens by fully using the horizontal 
size of each screen.
The aspect ratio is held. 
z
The main and sub- 
z
screens have the same 
height.
The screens are 
 
z
centered in vertical 
direction.
MODE 2:
The main and sub-screens have a 1-to-1 
horizontal ratio.
MODE 3:
The main and sub-screens have a 2-to-1 
horizontal ratio.
MODE 4:
The main and sub-screens have a 1-to-2 
horizontal ratio.
4 : 316 : 9
4 : 316 :...

62 - ENGLISH
Settings
PROJECTOR SETUP menu
See  
z“Navigating through the menu ”  
(
Æpage 39).
See 
 
z“MAIN MENU” and “SUB MENU ”  
(
Æpage 40).
PROJECTOR ID
The projector has an ID number setting function that 
helps the user to control two or more projectors either 
simultaneously or separately with a single remote 
control.
Press ▲▼ to select [PROJECTOR ID].
1  ) 
Press ◄► to switch [PROJECTOR ID].
2  ) 
The setting will change as follows each time  
z
◄► is pressed.
ALL1
6 2
Note
The ID number can...

PROJECTOR SETUP menu
ENGLISH - 63
Settings
HIGH ALTITUDE MODE
If you use the projector at high elevation (1 400 m to 
2 700 m), the [HIGH ALTITUDE MODE] setting needs 
to be [ON] to set the fan speed high.
Press ▲▼ to select [HIGH ALTITUDE 
1  ) 
MODE].
Press ◄► to switch [HIGH ALTITUDE 
2  ) 
MODE] and press  to select.
The setting will change as follows each time  
z
◄► is pressed.
OFFON
OFF Select this when using in normal 
environment (less than 1 400 m 
above sea level)
ON Select this when using at...

PROJECTOR SETUP menu
64 - ENGLISH
Settings
NO SIGNAL SHUT-OFF 
J
If no signal is input within a preset time, the projector 
power is automatically switched to the standby state.
Select [NO SIGNAL SHUT-OFF] in Step 
1. 
3.
Press ◄► to switch [NO SIGNAL 
2. 
SHUT-OFF] setting.
DISABLE The NO SIGNAL SHUT-OFF is 
ineffective.
10 to 90 minutes The Auto Power-Off time can be 
set in 10 minute increments.
STANDBY MODE 
J
This function can set the electric power when the 
projector is standing by.
Select...

PROJECTOR SETUP menu
ENGLISH - 65
Settings
Press ▲▼ to select [TIME] or 
4  ) 
[COMMAND] and change the setting 
according to the instructions of the 
menu.
TIME Set the time at which the command 
will be executed using ▲▼ buttons.
COMMAND Select a command to execute at the 
set time from the following.
POWER ON
• 
STANDBY• 
AV MUTE ON• 
AV MUTE OFF• 
INPUT RGB1• 
INPUT RGB2• 
INPUT VIDEO• 
INPUT S-VIDEO• 
INPUT DVI-D• 
INPUT HDMI• 
INPUT • 
NETWORK
LAMP POWER 
• 
NORMAL
LAMP POWER 
• 
ECO SIDE BY SIDE...

PROJECTOR SETUP menu
66 - ENGLISH
Settings
REMOTE MODE
You can customize the [REMOTE IN] terminal 
function.
Press ▲▼ to select [REMOTE MODE].
1  ) 
Press ◄► to switch [REMOTE MODE].
2  ) 
The setting will change as follows each time  
z
◄► is pressed.
DEFAULTUSERF SERIES
DEFAULT The pin assignment of the [REMOTE 
IN] terminal is used as the projector 
default setting. (
Æpage 85)
USER This is used for changing the settings 
for the REMOTE terminal.
Any settings you make for pins 2 
to 8 become valid...

PROJECTOR SETUP menu
ENGLISH - 67
Settings
STATUS
Displays the status of the projector.
Press ▲▼ to select [STATUS].
1  ) 
Press  button.
2  ) 
Press ◄► to move to the next page.
3  ) 
INPUT Displays the input selection 
state.
SIGNAL NAME Displays the input signal name.
SIGNAL  
FREQUENCY Displays the frequency of the 
input signal.
PROJECTOR   RUNTIME Displays the projector runtime.
LAMP ECO:
 
z
LAMP POWER: Shows the 
lamp lighting time in ECO 
mode.
NORMAL:
 
z
LAMP POWER: Shows the 
lamp lighting...

PROJECTOR SETUP menu
68 - ENGLISH
Settings
 
JAdjusting the date and time 
automatically
Press ▲▼ to select [DATE AND TIME].
1  ) 
Press  button.
2  ) 
Press ▲▼ to select [ADJUST CLOCK].
3  ) 
Press  button.
4  ) 
The [ADJUST CLOCK] screen will be displayed. 
z
Press ▲▼ to select [NTP 
5  ) 
SYNCHRONIZATION] and press ◄► to 
switch to [ON].
The setting will change as follows each time  
z
◄► is pressed.
OFFON
Press ▲▼ to select [APPLY], and 
6  ) 
press  button.
This completes setting of the time. 
z...

PROJECTOR SETUP menu
ENGLISH - 69
Settings
INITIALIZE
This returns various setting values to their factory 
default settings.
Press ▲▼ to select [INITIALIZE].
1  ) 
Press  button.
2  ) 
The [SECURITY PASSWORD] screen will be  
z
displayed.
Enter the password set for the 
3  ) 
[SECURITY PASSWORD].
The [INITIALIZE] screen will be displayed. 
z
Press ▲▼ to select the desired 
4  ) 
initialize item.
ALL USER  
DATA All setting values including [ENTRY 
SIGNAL], [NETWORK/E-MAIL], and 
[LOGO IMAGE] are...

70 - ENGLISH
Settings
TEST PATTERN menu
See  
z“Navigating through the menu ”  
(
Æpage 39).
See 
 
z“MAIN MENU” and “SUB MENU ”  
(
Æpage 40).
TEST PATTERN
Results of adjustment of the position, size and other 
factors are not reflected in test patterns. Ensure the 
input signal is displayed before performing various 
kinds of setting.
Press ◄► to select the required test 
1  ) 
pattern.
 
JCycle of displayed internal test 
patterns
The setting will change as follows each time ◄► 
is pressed.
MENU...