Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions
Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Troubleshooting
ENGLISH - 81
Maintenance
ProblemCauseReference
page
Picture from a
computer does not
appear. The cable may be longer than the optional cable.
z—
The external video output from a laptop computer may not be correct.
z
(You may be able to change the external output settings by pressing the
[Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies
depending on the type of computer; refer to the documentation provided
with your computer for further details.) —...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-80.png "Page 81
Troubleshooting
ENGLISH - 81
Maintenance
ProblemCauseReference
page
Picture from a
computer does not
appear. The cable may be longer than the optional cable.
z—
The external video output from a laptop computer may not be correct.
z
(You may be able to change the external output settings by pressing the
[Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies
depending on the type of computer; refer to the documentation provided
with your computer for further details.) —...")
Troubleshooting ENGLISH - 81 Maintenance ProblemCauseReference page Picture from a computer does not appear. The cable may be longer than the optional cable. z— The external video output from a laptop computer may not be correct. z (You may be able to change the external output settings by pressing the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies depending on the type of computer; refer to the documentation provided with your computer for further details.) —...
Page 82
![Page 82
82 - ENGLISH
Appendix
Technical Information
Serial terminal
The serial connector which is on the connector panel of the projector co\
nforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
JConnection
JPin assignments and signal names
D-Sub 9-pin (female)
Outside view Pin No.
Signal name Contents
—NC
TXD Transmitted data
RXD Received data
—Connected internally
GND Earth
—NC
CTS
Connected internally
RTS
—NC...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-81.png "Page 82
82 - ENGLISH
Appendix
Technical Information
Serial terminal
The serial connector which is on the connector panel of the projector co\
nforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
JConnection
JPin assignments and signal names
D-Sub 9-pin (female)
Outside view Pin No.
Signal name Contents
—NC
TXD Transmitted data
RXD Received data
—Connected internally
GND Earth
—NC
CTS
Connected internally
RTS
—NC...")
82 - ENGLISH Appendix Technical Information Serial terminal The serial connector which is on the connector panel of the projector co\ nforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. JConnection JPin assignments and signal names D-Sub 9-pin (female) Outside view Pin No. Signal name Contents —NC TXD Transmitted data RXD Received data —Connected internally GND Earth —NC CTS Connected internally RTS —NC...
Page 83
![Page 83
Technical Information
ENGLISH - 83
Appendix
JBasic format
Transmission from the computer begins with STX, then the ID, command, par\
ameter, and ETX are sent in this
order. Add parameters according to the details of control.
STX
AD I 1 I 2 ;C1 C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary\
.
:
Û
JBasic format (with sub command)
STX
AD I 1 I 2 ;C1 C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-82.png "Page 83
Technical Information
ENGLISH - 83
Appendix
JBasic format
Transmission from the computer begins with STX, then the ID, command, par\
ameter, and ETX are sent in this
order. Add parameters according to the details of control.
STX
AD I 1 I 2 ;C1 C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary\
.
:
Û
JBasic format (with sub command)
STX
AD I 1 I 2 ;C1 C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the...")
Technical Information ENGLISH - 83 Appendix JBasic format Transmission from the computer begins with STX, then the ID, command, par\ ameter, and ETX are sent in this order. Add parameters according to the details of control. STX AD I 1 I 2 ;C1 C2C3 : P1 P2Pn ETX When sending commands without parameters, a colon (:) is not necessary\ . : Û JBasic format (with sub command) STX AD I 1 I 2 ;C1 C2C3 : ETX S1S2S3S4S5 EP1P2P3P4P5P6 When transmitting a command which does not need a parameter, the...
Page 84
![Page 84
Technical Information
84 - ENGLISH
Appendix
JCable specifications
Projector
1
NC NC1
Computer (DTE
specifications)
2 2
3 3
4 NC NC4
5 5
6 NC NC6
7 7
8 8
9 NC NC9
JControl commands
When controlling the projector from a computer, the following commands are available:
Command
Control contents Notes
PON Power [ON]
To see if the power is [ON], use the [Power query] command.
POF Power [OFF]
QPW Power query 000 = Standby 001 = Power [ON]
IIS Switch input modes VID = VIDEO
SVD = S-VIDEO RG1 =...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-83.png "Page 84
Technical Information
84 - ENGLISH
Appendix
JCable specifications
Projector
1
NC NC1
Computer (DTE
specifications)
2 2
3 3
4 NC NC4
5 5
6 NC NC6
7 7
8 8
9 NC NC9
JControl commands
When controlling the projector from a computer, the following commands are available:
Command
Control contents Notes
PON Power [ON]
To see if the power is [ON], use the [Power query] command.
POF Power [OFF]
QPW Power query 000 = Standby 001 = Power [ON]
IIS Switch input modes VID = VIDEO
SVD = S-VIDEO RG1 =...")
Technical Information 84 - ENGLISH Appendix JCable specifications Projector 1 NC NC1 Computer (DTE specifications) 2 2 3 3 4 NC NC4 5 5 6 NC NC6 7 7 8 8 9 NC NC9 JControl commands When controlling the projector from a computer, the following commands are available: Command Control contents Notes PON Power [ON] To see if the power is [ON], use the [Power query] command. POF Power [OFF] QPW Power query 000 = Standby 001 = Power [ON] IIS Switch input modes VID = VIDEO SVD = S-VIDEO RG1 =...
Page 85
![Page 85
Technical Information
ENGLISH - 85
Appendix
REMOTE IN terminal
Using the [REMOTE IN] terminal provided on the connection terminals of t\
he main unit, it is possible to operate
the projector from a control panel etc. furnished in a distant location \
where infrared remote control signal cannot
be received.
JPin assignments and control
D-Sub 9-pin (Outside view) Pin No.
Signal name Open (H)Short (L)
GND —GND
POWER OFFON
RGB1Other RGB1
RGB2Other RGB2
VIDEOOtherVIDEO
S-VIDEO OtherS-VIDEO
DVI-D Other...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-84.png "Page 85
Technical Information
ENGLISH - 85
Appendix
REMOTE IN terminal
Using the [REMOTE IN] terminal provided on the connection terminals of t\
he main unit, it is possible to operate
the projector from a control panel etc. furnished in a distant location \
where infrared remote control signal cannot
be received.
JPin assignments and control
D-Sub 9-pin (Outside view) Pin No.
Signal name Open (H)Short (L)
GND —GND
POWER OFFON
RGB1Other RGB1
RGB2Other RGB2
VIDEOOtherVIDEO
S-VIDEO OtherS-VIDEO
DVI-D Other...")
Technical Information ENGLISH - 85 Appendix REMOTE IN terminal Using the [REMOTE IN] terminal provided on the connection terminals of t\ he main unit, it is possible to operate the projector from a control panel etc. furnished in a distant location \ where infrared remote control signal cannot be received. JPin assignments and control D-Sub 9-pin (Outside view) Pin No. Signal name Open (H)Short (L) GND —GND POWER OFFON RGB1Other RGB1 RGB2Other RGB2 VIDEOOtherVIDEO S-VIDEO OtherS-VIDEO DVI-D Other...
Page 86
Technical Information 86 - ENGLISH Appendix Two window display combination list (PT-DZ570U/PT-DW530U) Subwindow Main window RGB1 RGB2 VIDEO input S- VIDEO input DVI-D HDMI NETWORKRGB input YPBPR input RGB input YPBPR input *1 Moving image system *2 RGB system *1 Moving image system *2 RGB system RGB1 RGB input YPBPR input RGB2RGB inputYPBPR input VIDEO input S-VIDEO input DVI-DMoving image system *1 RGB system *2 HDMI Moving image system *1 RGB system *2 NETWORK : SIDE BY SIDE...
Page 87
Technical Information ENGLISH - 87 Appendix List of compatible signals The following table specifies the types of signals compatible with the projector. Format : V = VIDEO, S = S-VIDEO, D = DVI, H : HDMI, R : RGB, Y : YP B Mode Display resolution (dots) Scanning frequency Dot clock frequency (MHz) Format PnP *1 H (kHz) V (Hz) RGB2DVI-D EDID1 DVI-D EDID2 DVI-D EDID3 HDMI NTSC/NTSC4.43/ PAL-M/PAL60 720 × 480i 15.759.9 — V/S PAL/PAL-N/SECAM 720 × 576i15.650.0 — V/S 525i (480i) 720 ×...
Page 88
Technical Information 88 - ENGLISH Appendix ModeDisplay resolution (dots) Scanning frequency Dot clock frequency (MHz) Format PnP *1 H (kHz) V (Hz) RGB2DVI-D EDID1 DVI-D EDID2 DVI-D EDID3 HDMI 1 280 × 800 1 280×800 41.350.0 68.0 D/H/R 1 280×800 49.759.8 83.5 D/H/R ○ *4 ○ *4 ○ *4 ○ *4 1 280×800 *349.359.9 71.0 D/H/R 1 280×800 62.874.9 106.5 D/H/R 1 280×800 71.684.9 122.5 D/H/R MSXGA 1 280×96060.060.0 108.0 D/H/R SXGA 1 280×1 024 52.450.0 88.0 D/H/R 1 280×1 024 64.060.0 108.0...
Page 89
![Page 89
ENGLISH - 89
Appendix
Specifications
Model No.PT-DZ570UPT-DW530U PT-DX500U
Power supply AC100 V - 240 V 50 Hz/60 Hz
Power consumption 415 W
When [STANDBY MODE] is [ECO] : Approx. 0.3 W (100 V - 120 V), 0.4 W (220 V - 240 V) When [STANDBY MODE] is [NORMAL] : Approx. 15 W
Amps 5.0 A - 1.9 A
DLP chip Panel size
17.0 mm (0.67 inch)
(aspect ratio 16 : 10) 16.5 mm (0.65 inch)
(aspect ratio 16 : 10) 17.8 mm (0.7 inch)
(aspect ratio 4 : 3)
Display system Three-unit DLP chip, DLP type
Number of pixels 2...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-88.png "Page 89
ENGLISH - 89
Appendix
Specifications
Model No.PT-DZ570UPT-DW530U PT-DX500U
Power supply AC100 V - 240 V 50 Hz/60 Hz
Power consumption 415 W
When [STANDBY MODE] is [ECO] : Approx. 0.3 W (100 V - 120 V), 0.4 W (220 V - 240 V) When [STANDBY MODE] is [NORMAL] : Approx. 15 W
Amps 5.0 A - 1.9 A
DLP chip Panel size
17.0 mm (0.67 inch)
(aspect ratio 16 : 10) 16.5 mm (0.65 inch)
(aspect ratio 16 : 10) 17.8 mm (0.7 inch)
(aspect ratio 4 : 3)
Display system Three-unit DLP chip, DLP type
Number of pixels 2...")
ENGLISH - 89 Appendix Specifications Model No.PT-DZ570UPT-DW530U PT-DX500U Power supply AC100 V - 240 V 50 Hz/60 Hz Power consumption 415 W When [STANDBY MODE] is [ECO] : Approx. 0.3 W (100 V - 120 V), 0.4 W (220 V - 240 V) When [STANDBY MODE] is [NORMAL] : Approx. 15 W Amps 5.0 A - 1.9 A DLP chip Panel size 17.0 mm (0.67 inch) (aspect ratio 16 : 10) 16.5 mm (0.65 inch) (aspect ratio 16 : 10) 17.8 mm (0.7 inch) (aspect ratio 4 : 3) Display system Three-unit DLP chip, DLP type Number of pixels 2...
Page 90
![Page 90
Specifications
90 - ENGLISH
Appendix
Model No.PT-DZ570UPT-DW530U PT-DX500U
Terminals VIDEO IN
1 set, BNC, 1.0 V [p-p] 75 Ω
S-VIDEO IN 1 set, Mini DIN 4-pin, Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω, compatible with S1 signal
DVI-D IN 1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
HDMI IN 1 set, HDMI 19-pin (HDCP/Deep color compatible)
SERIAL IN 1 set, D-sub 9-pin, RS-232C compatible, computer control use
REMOTE IN 1 set, D-sub 9-pin, external control use
LAN 1 set, RJ-45, network...](http://img.usermanuals.tech/thumb/58/75773/w300_pt-dz570_en_om_d-89.png "Page 90
Specifications
90 - ENGLISH
Appendix
Model No.PT-DZ570UPT-DW530U PT-DX500U
Terminals VIDEO IN
1 set, BNC, 1.0 V [p-p] 75 Ω
S-VIDEO IN 1 set, Mini DIN 4-pin, Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω, compatible with S1 signal
DVI-D IN 1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
HDMI IN 1 set, HDMI 19-pin (HDCP/Deep color compatible)
SERIAL IN 1 set, D-sub 9-pin, RS-232C compatible, computer control use
REMOTE IN 1 set, D-sub 9-pin, external control use
LAN 1 set, RJ-45, network...")
Specifications 90 - ENGLISH Appendix Model No.PT-DZ570UPT-DW530U PT-DX500U Terminals VIDEO IN 1 set, BNC, 1.0 V [p-p] 75 Ω S-VIDEO IN 1 set, Mini DIN 4-pin, Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω, compatible with S1 signal DVI-D IN 1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible HDMI IN 1 set, HDMI 19-pin (HDCP/Deep color compatible) SERIAL IN 1 set, D-sub 9-pin, RS-232C compatible, computer control use REMOTE IN 1 set, D-sub 9-pin, external control use LAN 1 set, RJ-45, network...