Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions

ENGLISH - 31
Basic Operation
Powering ON/OFF
Connecting the power cord
Be sure to Insert the attached power cord securely to its base to preven\
t it from coming off.
Before connecting the power cord, confirm that the MAIN POWER switch is in the “ 
 ” (OFF) position.
 
JInstallation
Insert the plug securely until its right 
and left claw click.
 
JRemoval
Remove the power cord from the 
electrical outlet while pressing the 
knobs on its sides. 

Powering ON/OFF
32 - ENGLISH
Basic Operation
Powering up the projector
Connect the supplied power cable.
1  ) 
(AC100-120 V    50-60 Hz)
Press the [ | ] marked side of the 
2  ) 
MAIN POWER switch to turn on the 
power.
The POWER indicator lamp on the projector will 
flash in red. After a short period, the indicator will 
illuminate and the projector will enter standby 
mode.
Press POWER ON.
3  ) 
[Power indicator] lamp illuminates in green and 
soon the image is projected on the screen.
Note
If the...

Powering ON/OFF
ENGLISH - 33
Basic Operation
Powering off the projector
Press POWER STANDBY (
1  ) ).
Press ◄► to select [OK] and press 
2  ) 
(ENTER).  
(or press POWER STANDBY (
) 
again.)
The projection of the image stops, and [Power 
indicator] lamp of the main unit lights up orange.
(The cooling fan keeps running.)
Wait until the power indicator lamp of 
3  ) 
the main unit turns to red (i.e., until 
the cooling fan stops).
Press the [
4  ) 
] marked side of the 
(MAIN POWER) switch to remove all...

34 - ENGLISH
Basic Operation
Projecting
Check the connections of the peripheral devices, installation of the pro\
jection lens (Æpage 28), and connection 
of the power cord (
Æpage 31) and switch on the power (Æpage 32) to start the projector. Select the input signal 
and adjust the image.
Selecting the input signal
Select an input signal.
The image selected with  button is 
projected. (
Æpage 36)
Attention
Images may not be projected properly depending on the 
 
z
connected device and DVD, video tape,...

Projecting
ENGLISH - 35
Basic Operation
Adjustment range after lens position (optical shift)
Do not move the lens beyond the bounds of the shift range as this may ca\
use a change in the focus. This 
limitation is to protect the parts of the projector.
Using the standard projection position as the reference, the optical axi\
s shift function makes it possible to adjust 
the projection position in the ranges shown in the figures below.
PT-DZ570U
PT-DW530U
PT-DX500U
0.1 H
0.46 V
Projected screen height, V...

36 - ENGLISH
Basic Operation
Basic operations using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of 
time during the meeting intermission, for example, a 
AV MUTE mode is available that allows the user to 
hide images temporarily.
 button
Press  button on the 
1  ) 
remote control or the main unit.
The projected light is blocked by the internal  
z
shutter.
Press  button again.
2  ) 
Projection resumes. 
z
Note
The power indicator will flash while the AV...

Basic operations using the remote control
ENGLISH - 37
Basic Operation
Automatic adjustment
The automatic setup function can be used to 
automatically adjust the resolution, clock phase and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright 
white frame at the outermost periphery containing 
characters...

Basic operations using the remote control
38 - ENGLISH
Basic Operation
Controlling the volume of the 
speaker
You can control the volume of output sound.
 button
Press  button on the remote 
control.
+ buttonincreases the volume
- button decreases the volume 

ENGLISH - 39
Settings
Menu Navigation
Menus are extensively used for configuring, adjusting or reconfiguring the projector.
Navigating through the menu
 
JOperating procedure
Press  button.
1  ) 
[MAIN MENU] appears on the screen.
Press ▲▼ to select the desired item.
2  ) 
The selected item is highlighted in orange.
Press  button to establish 
3  ) 
your selection.
The submenu for the selected option will now 
open.
0
Press ▲▼ button to highlight the 
4  ) 
desired adjustment item, then press 
◄► to...

Menu Navigation
40 - ENGLISH
Settings
MAIN MENU
The main menu consists of the following 11 menu 
items.
When a main menu item is selected, the screen 
changes to a sub-menu selection screen.
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
SUB MENU
The sub-menu screen of the selected main menu 
appears, and you can set and adjust the various items 
in the sub-menu.
 
JPICTURE [  ]
Sub-menu item
DefaultPage
PICTURE MODE
STANDARD * 42...