Panasonic DLP Based Projector PT-DZ570U PT-DW530U PT-DX500U Operating Instructions

Precautions with regard to safety
ENGLISH - 11
Important  
Information
CAUTION
POWER
 
„
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks 
will result.
When not using the projector for an extended period of time, disconnect the power plug 
from the wall outlet and remove the batteries from the remote control.
Disconnect the power plug from the...

Precautions with regard to safety
12 - ENGLISH
Important  
InformationCautions when installing
Do not use under the following conditions.
 
„
Do not set up the projector outdoors.
 
z
The projector is designed for indoor use only.
Avoid setting up in places which are subject to vibration or shocks.
 
z
If the projector is installed in a place where vibrations are transmitte\
d or mounted in a car or a vessel, 
vibrations or impacts will result in damage to the internal parts, causi\
ng failure....

Precautions with regard to safety
ENGLISH - 13
Important  
Information
Cautions when setting the projectors 1
 
„
When installing and using the projector with a method other than floor standing installing using adjustable 
 
z
feet, fix it with the 4 ceiling mounting screws (shown in the figure).  
(Screw diameter: M4, Tapping depth inside set: 7 mm)
When installing the projector with a method other than floor standing installing, do not adjust its angle with the 
 
z
adjustable feet. Doing so can...

Precautions with regard to safety
14 - ENGLISH
Important  
Information
 
„
Cautions when setting the projectors 2
Make a clearance of at least 5 mm between the 
 
z
projector bottom and setting surface by inserting 
spacers (metallic) etc. between them.
Do not stack the projectors without using frame or 
 
z
shelf.
Do not cover the ventilation openings or place 
 
z
anything within 50 cm (20") of them as this may 
cause damage or injury.
Avoid heating or cooling air of the air conditioning 
 
z...

Precautions with regard to safety
ENGLISH - 15
Important  
Information
 
„
Do not touch the surface of the projector lens with your bare hand.
If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected 
onto the screen. Please put the lens cover on the projector when you do \
not use it.
Do not move the projector while it is operating or subject it to vibration or 
 
„
impact.
The service life of its internal components will be shortened....

Precautions with regard to safety
16 - ENGLISH
Important  
InformationAccessories
Make sure the following accessories are provided with your projector.
Remote control (x1)
(N2QAYB000566) Power cord (x1)
(TXFSX02RPKZ) Drop-prevention bracket (x1)
(TTRA0244) 
CD-ROM (x1)
(TXFQB02VKN9)AA/R6/LR6 batteries for 
remote control (x2)Lens cover (x1)
(TKKL5519)
Options
Model No.
Ceiling bracket For high ceiling : ET-PKD110H, For low ceiling : ET-PKD110S
Replacement Lamp Unit ET-LAD60A (1 bulb), ET-LAD60AW (2...

ENGLISH - 17
Preparation
Start-up display
The LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the first time 
or after it has been initialized. (
Æpage 69)
Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and envir\
onment settings.
Note
When the projector is turned on for the first time, you may be required to adjust the 
 
z “zoom ring” and “focus ring”
 (Æpage 19)
on the top of the projector body to make the menu screen clearer....

18 - ENGLISH
Preparation
About Your Projector
Attention
Do not drop the remote control.
 
z
Avoid contact with liquids or moisture.
 
z
Do not attempt to modify or disassemble the remote control.
 
z
Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as 
 
z
fluorescent.
Note
The remote control can be used within a distance of about 30 m if pointed directly at the remote control receiver. The 
 
z
remote control can control at angles of up...

About Your Projector
ENGLISH - 19
Preparation
Attention
Keep your hands and other objects away from the air outlet port.Keep your hand and face away.
 
z
Keep heat-sensitive articles away.
 
z
Inserting your finger may result in injury.
 
z
Heated air from the air outlet port can cause burns or deformations.
Projector body
Rear view 
JFront view 
J
Top view 
JBottom view 
J
Side views 
J
Power indicator (STANDBY(R) / ON(G))
Indicates the power supply status
Lamp indicator (LAMP)
Indicates the lamp unit...

About Your Projector
20 - ENGLISH
Preparation
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to 
 
z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
 
z
CONTROL PANEL 
J
Terminals on side 
J
**
 button
Switch between stand-by mode and projection mode.
Switches to VIDEO or S-VIDEO input.
Switches to RGB1 input.
Switches to RGB2 input....