Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)49
Basic Features
4
Reducing/Enlarging the
Length and Width
(Independent X-Y%)
The Independent X-Y% feature allows you to make copies with independent
length or width of the original. There are three methods available.
Specifying X/Y Percentage Change (Variable X-Y%)
You can make copies of
the originals by
selecting different ratios
for X and Y.  The image
will be copied according
to your selected values.
Specifying Original/Copy Size...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)50
Basic Features
4
You can make copies of your original by specifying its X and Y ratios
separately. The image will be copied according to the ratios that you have
entered.
Procedure
On the Basic Features screen, select Reduce/Enlarge.
Select Independent X-Y%.
Select Variable X-Y%.
The factory default for Reduce/
Enlarge is 100%.
Reduce/Enlarge can also be
selected on the Features Menu
screen.
The screen on the right has the Tray
6 (High...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)51
Basic Features
4
You can use         buttons below XY on
the display to increase or decrease the
ratio of X and Y simultaneously.
Select Cancel to cancel the settings.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Enter the X and Y ratios by using         buttons.
For example, enter Y = 120% and X = 200%.
Load the original in the orientation of Head to Top, or...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)52
Basic Features
4
Select Cancel to cancel the settings.
The machine will automatically
adjust the ratio to 25% if the
calculated ratio is 25% or below, and
400% if the calculated ratio is 400%
and above.
The factory default for Reduce/
Enlarge is 100%.
Reduce/Enlarge can also be
selected on the Features Menu
screen.
The screen on the right has the Tray
6 (High Capacity Feeder), and
Finisher installed.
The machine will make copies of your...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)53
Basic Features
4
Use the ruler markings surrounding
the Document Glass to set the area
of the original for scanning.
Select Cancel to cancel the settings.
To change the value, select Enter/
Next to move to the value you want.
Chapter 3 Loading Documents for
information on how to load
documents.
Set the document orientation
correctly because if it is different
from the orientation of original
loaded, XY is different and their
reduction or...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)54
Basic Features
4
The factory default for Reduce/
Enlarge is 100%.
Reduce/Enlarge can also be
selected on the Features Menu
screen.
Paper Supply can also be selected
on the Features Menu screen.
The screen on the right has the Tray
6 (High Capacity Feeder), and
Finisher installed.
Select Cancel to cancel the settings.
The machine will make copies of your original by calculating the X and Y
ratios so that the image can fit onto the selected...

4-4  Reducing/Enlarging the Length and Width (Independent X-Y%)55
Basic Features
4
To disable Image Rotation, set it to
Off on the Customized Features
screen or Features Menu screen.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Select Cancel to cancel the settings.
Chapter 3 Loading Documents for
information on how to load
documents.
Select Auto-Fit.
Load the original in the orientation of Head to Top, or Head to
Left.
Select...

4-5  Copying on One Side (2 Sided)56
Basic Features
4
Copying on One Side
(2 Sided)
The 2 Sided feature allows you to make one sided copies from one sided
documents or two sided documents,
To make one sided copies from a two sided document, use the DADF.
Procedure
On the Basic Features screen, select 2 Sided.
The screen on the right has the Tray
6 (High Capacity Feeder), and
Finisher installed.
2 Sided can also be selected on the
Features Menu screen. 

4-5  Copying on One Side (2 Sided)57
Basic Features
4
Select either 1     1 Sided or 2     1 Sided.
For example, select 2     1 Sided.
Select Head to Head or Head to Toe as the image orientation
of the document if you have selected 2     1 Sided.
Head to Head  When all sides of a document have the same orientation.
Head to Toe When the orientation of side two is the reverse of side one.
The factory default is 1     1 Sided.
Select Cancel to cancel the settings.
Select Cancel to cancel the settings.
When...

4-5  Copying on One Side (2 Sided)58
Basic Features
4
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features 
for details.
5-10: Selecting the Original
Orientation (Original Orientation)
 for
details.
Chapter 3 Loading Documents for
information on how to load
documents.
For 2     1 Sided copying, use the
DADF.
 Load the original in the orientation of Head to Top, or Head to
Left.
Select the corresponding document orientation of the original
loaded....